DOWNLOAD Sony DCR-DVD150E / DCR-DVD450E / DCR-DVD650 / DCR-DVD650E / DCR-DVD850 / DCR-DVD850E (serv.man2) Service Manual ↓ Size: 4.52 MB | Pages: 69 in PDF or view online for FREE

Model
DCR-DVD150E DCR-DVD450E DCR-DVD650 DCR-DVD650E DCR-DVD850 DCR-DVD850E (serv.man2)
Pages
69
Size
4.52 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie
File
dcr-dvd150e-dcr-dvd450e-dcr-dvd650-dcr-dvd650e-dcr.pdf
Date

Sony DCR-DVD150E / DCR-DVD450E / DCR-DVD650 / DCR-DVD650E / DCR-DVD850 / DCR-DVD850E (serv.man2) Service Manual ▷ View online

1-2
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
1-4. USING  SERVICE  JIG
Connect the extension cable (J-6082-572-A) between the DVD mechanism deck and CN4401 on the VC-552 board.
DVD mechanism deck
VC-552 board (side A)
Flexible board (10P)
Extension cable (10P)
(J-6082-572-A)
CN4401
1 1
3 1
C
Repaired by:
Refer to “1-5-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
1-5. SELF-DIAGNOSIS  FUNCTION
1-5-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
1-3E
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
1-5-3. Self-diagnosis Code Table
C
C
C
C
E
E
E
E
E
E
E
Block
Function
0
4
1
3
1
3
2
1
2
0
3
1
6
1
6
1
6
1
9
4
9
4
Detailed
Code
0
0
0
1
0
2
0
0
0
0
0
0
0
0
1
0
1
1
0
0
0
1
Symptom/State
Non-standard battery is used.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
Disc access error
Condensaton.
Flash memory data are rewritten.
Drive fault
Difficult to adjust focus
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
The abnormalities in initialization of
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
Fault of writing to or erasing the flash
memory
Internal flash memory fault
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Clean the disc with the supplied cleaning cloth.
Use a compatible disc with the camcorder.
Remove the disc, and insert it again after one hour.
Make flash memory data correct value. (Note 1)
Inspect or replacement of the mechanism deck, IC (IC4401 on
the VC-552 board) and drive block.
Inspect the lens block focus reset sensor (pin 8 of CN5401 on
the VC-552 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5401 on the VC-552 board)
when the focusing is not performed.
Inspect the lens block zoom reset sensor (pin 0 of CN5401 on
the VC-552 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5401 on
the VC-552 board) when zooming is not performed.
Check whether the flexible board of the lens is broken, and
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5401 on the VC-552 board).
Inspect the flash memory (IC7801 on the VC-552 board). (Note 1)
Inspect the internal flash memory (IC8701 on the VC-552 board)
(DVD450E/DVD850/DVD850E only)
Note 1:
Start the Adjust manual in the Adjust station and refer to the “DESTINATION DATA WRITE”.
2-1
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
2. DISASSEMBLY
NOTE  FOR  REPAIR
• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don’t pull at wire of connector. It is possible that a wire is snapped.
• When installing a connector, don’t press down at wire of connector.
It is possible that a wire is snapped.
Cut and remove the part of gilt 
which comes off at the point.
(Be careful or some 
pieces of gilt may be left inside) 
2-2
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
2-1. IDENTIFYING  PARTS
2-2-1. OVERALL SECTION
  • Cabinet R Section-1
  • BT/EVF Block
2-2-3. CABINET R SECTION-2
  • Hinge Block
  • CK-207 Board
2-2-2. CABINET R SECTION-1
  • Front Panel
  • MS-412 Board
  • LCD Section
2-2-4. CABINET L SECTION
  • Cabinet L
2-2-5. MD Section
  • Lens Block
  • VC-552 Board
  • Mechanism Deck
- DISASSEMBLY FLOW -
LCD Section
 • PD-377 Board
 • RV-016 Board
Front Panel
P Cabinet
Main Frame
Mechanism Deck
Cabinet R
 • MS-412 Board
 • CK-207 Board
 • FP-1031 Flexible Board
Lens Block
 • CD-751 Board
BT/EVF Block
 • BL-029 Board
Cabinet L
 • FP-569 Flexible Board
VC-552 Board
Page of 69
Display

Click on the first or last page to see other DCR-DVD150E / DCR-DVD450E / DCR-DVD650 / DCR-DVD650E / DCR-DVD850 / DCR-DVD850E (serv.man2) service manuals if exist.