Sony DCR-DVD106E / DCR-DVD108 / DCR-DVD108E / DCR-DVD109E / DCR-DVD608 / DCR-DVD608E (serv.man2) Service Manual ▷ View online
— 5 —
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
TABLE OF CONTENTS
1.
SERVICE NOTE
1-1.
Power Supply During Repairs ········································· 1-1
1-2.
To Take Out a Cassette when not Eject (Force Eject) ····· 1-1
1-3.
Using Service Jig ····························································· 1-2
1-4.
Self-diagnosis Function ··················································· 1-2
2.
DISASSEMBLY
2-1.
Disassembly ····································································· 2-2
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram (1/5) ··········································· 3-1
3-2.
Overall Block Diagram (2/5) ··········································· 3-2
3-3.
Overall Block Diagram (3/5) ··········································· 3-3
3-4.
Overall Block Diagram (4/5) ··········································· 3-4
3-5.
Overall Block Diagram (5/5) ··········································· 3-5
3-6.
Power Block Diagram (1/3) ············································· 3-6
3-7.
Power Block Diagram (2/3) ············································· 3-7
3-8.
Power Block Diagram (3/3) ············································· 3-8
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-1.
Frame Schematic Diagrams ············································· 4-1
4-2.
Schematic Diagrams ························································ 4-3
4-3.
Printed Wiring Boards ··················································· 4-29
4-4.
Mounted Parts Location ················································ 4-43
5.
REPAIR PARTS LIST
5-1.
Exploded Views ······························································· 5-2
5-2.
Electrical Parts List ························································· 5-9
Section
Title
Page
1-1
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
1. SERVICE NOTE
1-1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4 V), the power is shut off so
that the unit cannot operate.
These following method is available to prevent this.
that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor (AC-L200/L200B).
1-2. TO TAKE OUT A DISC WHEN NOT EJECT (FORCE EJECT)
1
Peel off the jack cover assy and remote control window.
2
Insert the wire etc. in the hole and down the eject slider by it.
Hole
Remote control window
Jack cover assy
Eject slider
Charge
lever
lever
1-2
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
1-3. USING SERVICE JIG
Connect the extension cable (J-6082-572-A) between the DVD mechanism deck and CN1008 on the VC-483 board.
DVD mechanism deck
VC-483 board (side B)
Flexible board (10P)
Extension cable (10P)
(J-6082-572-A)
CN1008
1 1
3 1
C
Repaired by:
Refer to “1-4-3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
1-4. SELF-DIAGNOSIS FUNCTION
1-4-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
1-4-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
1-3E
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_L2
1-4-3. Self-diagnosis Code Table
C
C
C
E
E
E
E
E
E
Block
Function
0
4
1
3
1
3
2
0
3
1
6
1
6
1
6
1
9
4
Detailed
Code
0
0
0
1
0
2
0
0
0
0
0
0
1
0
1
1
0
0
Symptom/State
Non-standard battery is used.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
“Memory Stick Duo” is broken.
Disc access error
Flash memory data are rewritten.
Drive fault
Difficult to adjust focus
(Cannot initialize focus.)
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
(Cannot initialize zoom lens.)
The abnormalities in initialization of
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
Fault of writing to or erasing the flash
memory
memory
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Clean the disc with the supplied cleaning cloth.
Use a compatible disc with the camcorder.
Use a compatible disc with the camcorder.
Make flash memory data correct value. (Note)
Inspect or replacement of the mechanism deck, IC (IC4401 on
the VC-483 board) and drive block.
the VC-483 board) and drive block.
Inspect the lens block focus reset sensor (pin 7 of CN5601 on
the VC-483 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5601 on the VC-483 board)
when the focusing is not performed.
the VC-483 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5601 on the VC-483 board)
when the focusing is not performed.
Inspect the lens block zoom reset sensor (pin qa of CN5601 on
the VC-483 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5601 on
the VC-483 board) when zooming is not performed.
the VC-483 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5601 on
the VC-483 board) when zooming is not performed.
Check whether the flexible board of the lens is broken, and
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5601 on the VC-483 board).
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5601 on the VC-483 board).
Inspect the flash memory (IC2201 on the VC-483 board). (Note)
Note:
Refer to “1-3. DESTINATION DATA WRITE”, ADJ (9-852-173-51).
Click on the first or last page to see other DCR-DVD106E / DCR-DVD108 / DCR-DVD108E / DCR-DVD109E / DCR-DVD608 / DCR-DVD608E (serv.man2) service manuals if exist.