DOWNLOAD Sony DCR-DVD100 / DCR-DVD100E (serv.man4) Service Manual ↓ Size: 933.62 KB | Pages: 52 in PDF or view online for FREE

6-4

• Oscilloscope

• Color monitor

• Vectorscope

• Digital voltmeter

J-1

J-2

J-3

J-4

J-5

J-6

J-7

J-8

J-9

J-10

J-11

Filter for color temperature correction (C14)

ND filter 1.0

ND filter 0.4

ND filter 0.1

Pattern box PTB-450

Color chart for pattern box

Adjustment remote commander
(RM-95 upgraded)

Siemens star chart

Clear chart for pattern box

CPC-8 jig

Extension cable (100P, 0.5mm)

Mini pattern box

Camera table

J-6080-058-A

J-6080-808-A

J-6080-806-A

J-6080-807-A

J-6082-200-A

J-6020-250-A

J-6082-053-B

J-6080-875-A

J-6080-621-A

J-6082-388-A

J-6082-352-A

J-6082-353-B

J-6082-384-A

Auto white balance adjustment/check
White balance adjustment/check

White balance check

White balance check

White balance check

For checking the flange back

For adjusting the color viewfinder
For adjusting the LCD block
For checking the base unit

For extension between the MD-097 board (CN4901) and
the VC-307 board (CN1008)

For adjusting the flange back

For adjusting the flange back

J-1

J-2

J-3

J-4

J-5

J-6

J-7

J-8

J-9

J-10

J-11

Fig. 6-1-1.

6-5

For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.

When performing only the adjustments, the lens block and boards
need not be disassembled.

Before performing the adjustments, check the data of page: 0,
address: 10 is “00”. If not, set data: 00 to this address.

1)

Connect the equipment for adjustments according to Fig. 6-1-3.

As removing the cabinet (R) assembly (removing CN1007 of the
VC-307 board) means removing the lithium 3V power supply
(BT5201 on the CK-127 board), data such as date, time, user-set
menus will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (user
initial power on date, final condensation occurrence data) will be
kept even if the lithium 3V power supply is removed. (Refer to
“6-3. Service Mode” for the self-diagnosis data and the data on
history of use.)

Setting the “Forced MOVIE mode”.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE

button.

The above procedure will enable the camera power to be turned
on with the control switch block (PS-CX5500) removed. After
completing adjustments, be sure to exit the “Forced MOVIE mode”.

Exiting the “Forced MOVIE mode”.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE

button.

3) Select page: 0, address: 01, and set data: 00.

Fig. 6-1-2.

1.5 m

Front of the lens

Pattern box

6-6

Fig. 6-1-3.

CPC lid
(bottom)

Adjustment remote
commander (RM-95)

CPC-8 jig
(J-6082-388-A)

Screw 
(M1.7 

× 

4),

lock ace, p2

LANC jack

AC power
adaptor 

AC IN

DC-IN connector

6-7

Unless otherwise specified, set the switches as follows and perform
adjustments without loading cassette.

1.

MODE dial (PS-CX5500 block) ..................... MOVIE ( 

 )

2.

NIGHT SHOT (Lens block) ............................................ OFF

3.

COLOR SLOW S/ SUPER NS ........................................ OFF

4.

FOCUS (KP-CX5500 block) ................................ MANUAL

5.

BACK LIGHT (FB-220 board) ........................................ OFF

6.

STEADY SHOT (Menu setting) ...................................... OFF

7.

DIGITAL ZOOM (Menu setting) .................................... OFF

8.

DEMO MODE (Menu setting) ........................................ OFF

9.

PROGRAM AE (Menu setting) ................................... AUTO

10. PICTURE EFECT (Menu setting) ................................... OFF
11. DIGITAL EFECT (Menu setting) .................................... OFF
12. WHITE BALANCE (Menu setting) ............................ AUTO
13. 16:9 WIDE (Menu setting) .............................................. OFF

Basically carry out adjustments in the order given.

Fig. 6-1-4.

1)

Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)

2)

Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time.)

3)

Flange back adjustment chart
Make the chart shown in Fig. 6-1-5 using A0 size (1189mm 

×

841mm) black and white vellum paper.

Fig. a

(Video output terminal

output waveform)

Fig. b (TV monitor picture)

Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a
and the TV monitor display shown in Fig. b.

Fig. 6-1-5.

Use matte vellum paper bigger than A0, and make sure the edges of
the black and white paper joined together are not rough.