Sony DCR-DVD100 / DCR-DVD100E (serv.man3) Service Manual ▷ View online
— 3 —
DCR-DVD100/DVD100E
Checking supplied accessories.
Other accessories
3-081-300-13 MANUAL, INSTRUCTION (ENGLISH)(DVD100:US,CND,E)
3-081-300-21 MANUAL, INSTRUCTION (FRENCH)(DVD100:CND)
3-081-300-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
3-081-300-21 MANUAL, INSTRUCTION (FRENCH)(DVD100:CND)
3-081-300-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
(DVD100:E)
3-081-300-41 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(DVD100:E)
3-081-300-61 MANUAL, INSTRUCTION (ARABIC)(DVD100:E)
3-081-302-11 MANUAL, INSTRUCTION (ENGLISH/FRENCH)
(DVD100E:AEP,UK,E,HK,AUS)
3-081-302-21 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
(DVD100E:AEP)
3-081-302-31 MANUAL, INSTRUCTION (ITALIAN/GREEK)
(DVD100E:AEP)
Make sure that the following accessories are supplied with your camcorder.
Power cord (Main lead)(1)
(AEP, EE, E model)
(AEP, EE, E model)
0
1-769-608-11
Power cord (Main lead)(1)
(AUS model)
(AUS model)
0
1-696-819-21
Power cord (Main lead)(1)
(UK, HK model)
(UK, HK model)
0
1-783-374-11
Power cord (Main lead)(1)
(US, CND model)
(US, CND model)
0
1-790-107-22
AC power adaptor (1) (AC-L15A)
0
1-477-533-32
R6 (size AA) batteries
for the Remote
Commander (2)
(not supplied)
for the Remote
Commander (2)
(not supplied)
DVD-R (DMR30) (1)
(not supplied)
(not supplied)
Shoulder strap (1)
3-987-015-01
3-987-015-01
A/V connecting cable
(1.5m) (1)
1-824-097-11
(1.5m) (1)
1-824-097-11
NP-FM50 battery pack (1)
(not supplied)
(not supplied)
Wireless Remote Commander (1)
(RMT-820)
1-477-868-21
(RMT-820)
1-477-868-21
CD-ROM
(SPVD-011 (I) USB Driver) (1)
(US, CND model)
3-086-131-01
CD-ROM
(SPVD-011 USB Driver) (1)
(AEP, UK, EE, E, HK,
AUS model)
3-086-132-01
(SPVD-011 (I) USB Driver) (1)
(US, CND model)
3-086-131-01
CD-ROM
(SPVD-011 USB Driver) (1)
(AEP, UK, EE, E, HK,
AUS model)
3-086-132-01
21-pin conversion connector (1)
(AEP, UK, EE model)
1-770-783-21
(AEP, UK, EE model)
1-770-783-21
2-pin conversion adaptor (1)
(E, HK model)
1-569-008-12
(E, HK model)
1-569-008-12
Note :
The components identified by
mark
The components identified by
mark
0
or dotted line with mark
0
are critical for safety.
Replace only with part number
specified.
specified.
Note :
Les composants identifiés par
une marque
Les composants identifiés par
une marque
0
sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Lens cap (1)
X-3953-658-1
X-3953-658-1
Cleaning cloth (1)
3-073-861-01
3-073-861-01
USB cable (1)
1-823-930-11
1-823-930-11
• Abbreviation
CND : Canadian model
EE
EE
: East European model
3-081-302-41 MANUAL, INSTRUCTION (GERMAN/DUTCH)
(DVD100E:AEP)
3-081-302-51 MANUAL, INSTRUCTION (SWEDISH/RUSSIAN)
(DVD100E:E)
3-081-302-61 MANUAL, INSTRUCTION (ARABIC/PERSIAN)
(DVD100E:E)
3-081-302-71 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(DVD100E:HK)
3-081-302-81 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE)
(DVD100E:E)
Lid Battery
Case
(3-709-572-01)
HK
: Hong Kong model
AUS : Australian model
— 4 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
DCR-DVD100/DVD100E
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
— 5 —
DCR-DVD100/DVD100E
SERVICE NOTE
COVER
COVER
1.
SELF-DIAGNOSIS FUNCTION
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder, or LCD
screen what to do. This function consists of two display; self-
diagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
function starts working, and displays on the viewfinder, or LCD
screen what to do. This function consists of two display; self-
diagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruction
manual.
2.
SELF-DIAGNOSIS DISPLAY
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen consists of an alphabet and 4-digit number,
which blinks at 3.2Hz. This 5-character display indicates the
“repaired by:”, “block” in which the problem occurred, and “detailed
code” of the problem.
viewfinder or LCD screen consists of an alphabet and 4-digit number,
which blinks at 3.2Hz. This 5-character display indicates the
“repaired by:”, “block” in which the problem occurred, and “detailed
code” of the problem.
Note:
The “self-diagnosis display” data will be kept even if the lithium battery (CK-127 board BT5201 of the cabinet (R) assembly) is removed.
1 1
3 1
C
Repaired by:
Self-diagnosis Code Table.
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the disc.
32 ....Turn on power again.
step to be taken.
E.g.
31 ....Reload the disc.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2Hz
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
H : Corrected by dealer
E : Corrected by service
engineer
Viewfinder or LCD screen
C : 3 1 : 1 1
3.
SELF-DIAGNOSIS CODE TABLE
Note:
Add the sentence as follows.
If other codes are displayed, service is required.
Please send the set to a specialized center.
If other codes are displayed, service is required.
Please send the set to a specialized center.
C
C
C
Block
Function
0
4
1
3
2
1
Detailed
Code
0
0
0
0
0
0
Symptom/State
Non-standard battery is used.
Faulty disc is used.
Condensation.
Self-diagnosis Code
Repaired b
y
:
Correction
Use the InfoLITHIUM battery.
Use a compatible disc with the camcorder.
Remove the disc, and insert it again after one hour.
— 6 —
DCR-DVD100/DVD100E
MAIN PARTS
COVER
COVER
Note:
• Follow the disassembly procedure in the numerical order given.
• Items marked “*” are not stocked since they are seldom required for routine service.
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The parts numbers of such as a cabinet are also appeared in this section.
Refer to the parts number mentioned below the name of parts to order.
1.
ORNAMENTAL PARTS
The components identified by mark
0
or
dotted line with mark
0
are critical for safety.
Replace only with part number specified.
Les composants identifiés par une marque
0
sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
le numéro spécifié.
Standard commander (RMT-820)
1-477-868-21
1-477-868-21
Battery case lid (for RMT-820)
3-709-572-01
3-709-572-01
CPC lid (bottom)
(3-084-660-01)
(3-084-660-01)
CPC lid (BT)
(3-084-659-01)
(3-084-659-01)
Jack cover (L)
(3-084-645-01)
(3-084-645-01)
Jack cover (F)
(3-084-647-01) (DCR-TRV100)
(3-084-647-31) (DCR-TRV100E)
(3-084-647-01) (DCR-TRV100)
(3-084-647-31) (DCR-TRV100E)
Grip belt
Note: Disassembling the main unit
is necessary to replace it.
DC cover
Note: Disassembling the main unit
is necessary to replace it.
Jack cover (U)
Note: Disassembling the main unit
is necessary to replace it.
Screw
(M1.7
(M1.7
×
4), lock ace, p2
(3-080-198-31)
Screw
(M1.7
(M1.7
×
4), lock ace, p2
(3-080-198-31)