Sony CCD-TRV54E / CCD-TRV56E / CCD-TRV62 / CCD-TRV64E / CCD-TRV72 / CCD-TRV82 / CCD-TRV94 / CCD-TRV94E (serv.man2) Service Manual ▷ View online
– 1 –
HOW TO REMOVE THE CASSETTE COMPARTMENT WHEN IT STOPS WHILE MOVING
APPLICATION MODEL;TRV56E/TRV82/TRV94/TRV94E
RMT-708/717
SERVICE MANUAL
SUPPLEMENT-2
File this supplement-1 with your Service Manual.
If the Cassette Compartment stops while it is
moving,the screw shown in the figure will become
hidden and the cabinet (R) will not be able to be
removed. Return the cassette compartment to its
original position according to the procedure below.
moving,the screw shown in the figure will become
hidden and the cabinet (R) will not be able to be
removed. Return the cassette compartment to its
original position according to the procedure below.
1. Remove the cassette lid assembly.
Shoe base
Screw (M2x4)
CCD-TRV54E/TRV56E/TRV62/TRV64E/
TRV72/TRV82/TRV94/TRV94E
US Model
CCD-TRV62/TRV72/TRV825
Canadian Model
CCD-TRV72/TRV82
AEP Model
UK Model
CCD-TRV64E/TRV94E
East European Model
North European Model
Russian Model
CCD-TRV64E
E Model
CCD-TRV54E/TRV56E/TRV94/TRV94E
Hong Kong Model
CCD-TRV56E/TRV94/TRV94E
Australian Model
CCD-TRV56E
Tourist Model
CCD-TRV56E/TRV94/TRV94E
Chinese Model
CCD-TRV64E
1
Two screws
(M2x4)
2
Cassette lid assembly
(98-004)
– 2 –
5
FP-512 flexible board
2
Screw(M2x4)
3
Screw(M2x4)
Two claws
Claw
1
Two screws(M2x4)
4
Front panel block
2. Remove the front panel block.
3. Remove the four screws at the bottom side.
4. Remove the three screws shown in the figure below.
7. When the loading motor opeerates, apply the voltage to the
loading motor terminal to lower the cassette compartment.
When the loading motor does not operate, remove the screw
shown in the figure below and lower the cassette compartment
with your hand.
When the loading motor does not operate, remove the screw
shown in the figure below and lower the cassette compartment
with your hand.
8. Check the cassette compartment has descended to its original
position, and remove the screw (Lock Ace M2) shown in Fig.1.
9. After removing the cabinet (S) ,remove the cabinet (R) referring
to “DISASSEMBLY” in the service manual.
Sony Corporation
Personal A&V Products Company
9-973-955-82
98F0990-1
Printed in Japan ©1998. 6
Published by Quality Engineering Dept.
(Osaki East)
2
Two screws(M2x4)
1
Two screws(M2x4)
5. Remove the battery panel assembly with pulling the cabinet (L)
assembly in direction of the arrow.
6. Remove the screw (Lock Ace M2) shown in the figure below,
and remove the cabinet (L) assembly .
Cabinet (L) assembly
Screw (Lock Ace M2)
Connector
CN704,12P
CN704,12P
Battery panel block
Gear
Screw
Loading motor
Motor terminal
1
Tilt-up the EVF block to the direction of arrow
2
Three screws(M2x4)
Display