Sony CCD-TRV107E / CCD-TRV108E / CCD-TRV208E / CCD-TRV408E (serv.man3) Service Manual ▷ View online
— 9 —
CCD-TRV107E/TRV108E/TRV208E/TRV408E
:
Changed portion.
Page
CORRECT
5-24
1-5.
LCD SYSTEM ADJUSTMENT
Note 4:
Connect the adjustment remote commander to CN713 of VC-272
board via I/F unit for LANC control (J-6082-521-A) and CPC jig
connector (J-6082-539-A). To operate the adjustment remote
commander, connect the AC power adapter (8.4Vdc) to the DC
IN jack of I/F unit for LANC control, or connect the L series Info-
LITHIUM battery to the battery terminal of I/F unit for LANC
control.
:
Changed portion.
Page
CORRECT
5-28
5-2. MECHANISM SECTION ADJUSTMENT
2-1. ADJUSTMENT REMOTE COMMANDER
Connect the adjustment remote commander to CN713 of VC-272
board via I/F unit for LANC control (J-6082-521-A) and CPC jig
connector (J-6082-539-A). To operate the adjustment remote
commander, connect the AC power adapter (8.4Vdc) to the DC IN
jack of I/F unit for LANC control, or connect the L series Info-
LITHIUM battery to the battery terminal of I/F unit for LANC
control.
board via I/F unit for LANC control (J-6082-521-A) and CPC jig
connector (J-6082-539-A). To operate the adjustment remote
commander, connect the AC power adapter (8.4Vdc) to the DC IN
jack of I/F unit for LANC control, or connect the L series Info-
LITHIUM battery to the battery terminal of I/F unit for LANC
control.
2-3. TAPE PATH ADJUSTMENT
1. Preparations for Adjustment
6)
Connect the oscilloscope to I/F unit for LANC control.
Channel 1: PB RF (Pin 9 of CN713)
External trigger: SWP (Pin 5 of CN713)
External trigger: SWP (Pin 5 of CN713)
:
Changed portion.
:
Added portion.
Page
CORRECT
5-29
5-3. VIDEO SECTION ADJUSTMENTS
3-1.
PREPARATIONS BEFORE ADJUSTMENTS
3-1-1.
Equipment to Required
12) Adjustment remote commander (J-6082-053-B)
13) CPC jig connector (J-6082-539-A)
13) CPC jig connector (J-6082-539-A)
14) I/F unit for LANC control (J-6082-521-A)
5-30
3-1-2.
Precautions on Adjusting
1)
Connect the adjustment remote commander to CN713 of VC-
272 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). To operate the adjustment
remote commander, connect the AC power adapter to the DC
IN jack of I/F unit for LANC control, or connect the L series
Info-LITHIUM battery to the battery terminal of I/F unit for
LANC control.
272 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). To operate the adjustment
remote commander, connect the AC power adapter to the DC
IN jack of I/F unit for LANC control, or connect the L series
Info-LITHIUM battery to the battery terminal of I/F unit for
LANC control.
CCD-TRV107E/TRV108E/TRV208E/TRV408E
— 10 —
Sony EMCS Co.
2002G1600-1
©2002.7
Published by DI Customer Center
9-929-927-91
:
Changed portion.
Page
CORRECT
5-31
3-1-3.
Adjusting Connectors
Some of the adjusting points of the video section are concentrated
in CN713 of VC-272 board. Connect the Measuring instrument and
the adjustment remote commander via the I/F unit for LANC control
(J-6082-521-A) and CPC jig connector (J-6082-539-A) to CN713.
To operate the adjustment remote commander, connect the AC power
adapter to the DC IN jack of I/F unit for LANC control, or connect
the L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
The following table shows the Pin No. and signal name of CN713.
in CN713 of VC-272 board. Connect the Measuring instrument and
the adjustment remote commander via the I/F unit for LANC control
(J-6082-521-A) and CPC jig connector (J-6082-539-A) to CN713.
To operate the adjustment remote commander, connect the AC power
adapter to the DC IN jack of I/F unit for LANC control, or connect
the L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
The following table shows the Pin No. and signal name of CN713.
Table 5-3-1.
The following table shows the arrangement of the test points of I/F
unit for LANC control. (Pin No. are those of CN713.)
unit for LANC control. (Pin No. are those of CN713.)
Table 5-3-2.
Pin No.
1
2
3
4
5
6
7
8
Signal Name
N.C.
IR VIDEO
BPF MONI
CAP FG
RF SWP
REG GND
REC RF
REG GND
Pin No.
9
10
11
12
13
14
15
16
Signal Name
PB RF
REG GND
LANC OUT
LANC IN
XLANC POWER ON
EVF VG
VCO
N.C.
Pin No.
14
9
3
5
4
Signal Name
BL
EVF VG
PB RF (MON)
BPF MONI
TMS
TDI
SWP
CAP FG
Pin No.
15
6,8,10
7
2
Signal Name
EVF VCO
BL 4.75
GND
REC RF (RF IN)
TDO
TCK
IR VIDEO
Fig. 5-3-1.
CPC jig connector
CPC jig
Remove the CPC lid
CN713
Conductor side
16
1
:
Changed portion.
Page
CORRECT
5-40
5-4. SERVICE MODE
4-1.
ADJUSTMENT REMOTE COMMANDER
1. Using the Adjustment Remote Commander
1)
Connect the adjustment remote commander to CN713 of VC-
272 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). To operate the adjustment
remote commander, connect the AC power adapter (8.4Vdc)
to the DC IN jack of I/F unit for LANC control, or connect the
L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
272 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). To operate the adjustment
remote commander, connect the AC power adapter (8.4Vdc)
to the DC IN jack of I/F unit for LANC control, or connect the
L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
CCD-TRV107E/TRV108E/TRV208E/TRV408E
— 10 —
Sony EMCS Co.
2002G1600-1
©2002.7
Published by DI Customer Center
9-929-927-91
:
Changed portion.
Page
CORRECT
5-31
3-1-3.
Adjusting Connectors
Some of the adjusting points of the video section are concentrated
in CN713 of VC-272 board. Connect the Measuring instrument and
the adjustment remote commander via the I/F unit for LANC control
(J-6082-521-A) and CPC jig connector (J-6082-539-A) to CN713.
To operate the adjustment remote commander, connect the AC power
adapter to the DC IN jack of I/F unit for LANC control, or connect
the L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
The following table shows the Pin No. and signal name of CN713.
in CN713 of VC-272 board. Connect the Measuring instrument and
the adjustment remote commander via the I/F unit for LANC control
(J-6082-521-A) and CPC jig connector (J-6082-539-A) to CN713.
To operate the adjustment remote commander, connect the AC power
adapter to the DC IN jack of I/F unit for LANC control, or connect
the L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
The following table shows the Pin No. and signal name of CN713.
Table 5-3-1.
The following table shows the arrangement of the test points of I/F
unit for LANC control. (Pin No. are those of CN713.)
unit for LANC control. (Pin No. are those of CN713.)
Table 5-3-2.
Pin No.
1
2
3
4
5
6
7
8
Signal Name
N.C.
IR VIDEO
BPF MONI
CAP FG
RF SWP
REG GND
REC RF
REG GND
Pin No.
9
10
11
12
13
14
15
16
Signal Name
PB RF
REG GND
LANC OUT
LANC IN
XLANC POWER ON
EVF VG
VCO
N.C.
Pin No.
14
9
3
5
4
Signal Name
BL
EVF VG
PB RF (MON)
BPF MONI
TMS
TDI
SWP
CAP FG
Pin No.
15
6,8,10
7
2
Signal Name
EVF VCO
BL 4.75
GND
REC RF (RF IN)
TDO
TCK
IR VIDEO
Fig. 5-3-1.
CPC jig connector
CPC jig
Remove the CPC lid
CN713
Conductor side
16
1
:
Changed portion.
Page
CORRECT
5-40
5-4. SERVICE MODE
4-1.
ADJUSTMENT REMOTE COMMANDER
1. Using the Adjustment Remote Commander
1)
Connect the adjustment remote commander to CN713 of VC-
272 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). To operate the adjustment
remote commander, connect the AC power adapter (8.4Vdc)
to the DC IN jack of I/F unit for LANC control, or connect the
L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
272 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). To operate the adjustment
remote commander, connect the AC power adapter (8.4Vdc)
to the DC IN jack of I/F unit for LANC control, or connect the
L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
CCD-TRV107E/TRV108E/TRV208E/TRV408E
— 10 —
Sony EMCS Co.
2002G1600-1
©2002.7
Published by DI Customer Center
9-929-927-91
:
Changed portion.
Page
CORRECT
5-31
3-1-3.
Adjusting Connectors
Some of the adjusting points of the video section are concentrated
in CN713 of VC-272 board. Connect the Measuring instrument and
the adjustment remote commander via the I/F unit for LANC control
(J-6082-521-A) and CPC jig connector (J-6082-539-A) to CN713.
To operate the adjustment remote commander, connect the AC power
adapter to the DC IN jack of I/F unit for LANC control, or connect
the L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
The following table shows the Pin No. and signal name of CN713.
in CN713 of VC-272 board. Connect the Measuring instrument and
the adjustment remote commander via the I/F unit for LANC control
(J-6082-521-A) and CPC jig connector (J-6082-539-A) to CN713.
To operate the adjustment remote commander, connect the AC power
adapter to the DC IN jack of I/F unit for LANC control, or connect
the L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
The following table shows the Pin No. and signal name of CN713.
Table 5-3-1.
The following table shows the arrangement of the test points of I/F
unit for LANC control. (Pin No. are those of CN713.)
unit for LANC control. (Pin No. are those of CN713.)
Table 5-3-2.
Pin No.
1
2
3
4
5
6
7
8
Signal Name
N.C.
IR VIDEO
BPF MONI
CAP FG
RF SWP
REG GND
REC RF
REG GND
Pin No.
9
10
11
12
13
14
15
16
Signal Name
PB RF
REG GND
LANC OUT
LANC IN
XLANC POWER ON
EVF VG
VCO
N.C.
Pin No.
14
9
3
5
4
Signal Name
BL
EVF VG
PB RF (MON)
BPF MONI
TMS
TDI
SWP
CAP FG
Pin No.
15
6,8,10
7
2
Signal Name
EVF VCO
BL 4.75
GND
REC RF (RF IN)
TDO
TCK
IR VIDEO
Fig. 5-3-1.
CPC jig connector
CPC jig
Remove the CPC lid
CN713
Conductor side
16
1
:
Changed portion.
Page
CORRECT
5-40
5-4. SERVICE MODE
4-1.
ADJUSTMENT REMOTE COMMANDER
1. Using the Adjustment Remote Commander
1)
Connect the adjustment remote commander to CN713 of VC-
272 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). To operate the adjustment
remote commander, connect the AC power adapter (8.4Vdc)
to the DC IN jack of I/F unit for LANC control, or connect the
L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
272 board via I/F unit for LANC control (J-6082-521-A) and
CPC jig connector (J-6082-539-A). To operate the adjustment
remote commander, connect the AC power adapter (8.4Vdc)
to the DC IN jack of I/F unit for LANC control, or connect the
L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control.
