DOWNLOAD Sony CCD-TR648E / CCD-TR748E / CCD-TR848 Service Manual ↓ Size: 14.04 MB | Pages: 127 in PDF or view online for FREE

— 8 —

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

C

0

4

2

1

2

2

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

0

0

0

0

0

0

1

0

1

1

2

0

2

1

2

2

2

3

3

0

3

1

4

0

4

1

4

2

4

3

4

4

1

0

1

1

2

0

2

1

2

2

2

3

3

0

3

1

4

0

4

1

4

2

4

3

4

4

Non-standard battery is used.

Condensation.

Video head is dirty.

LOAD direction. Loading does not
complete within specified time

UNLOAD direction. Loading does not
complete within specified time

T reel side tape slacking when unloading.

S reel side tape slacking when unloading.

T reel fault.

S reel fault.

FG fault when starting capstan.

FG fault during normal capstan operations.

FG fault when starting drum.

PG fault when starting drum.

FG fault during normal drum operations.

PG fault during normal drum operations.

Phase fault during normal drum operations.

LOAD direction loading motor time-
out.

UNLOAD direction loading motor
time-out.

T reel side tape slacking when
unloading.

S reel side tape slacking when
unloading.

T reel fault.

S reel fault.

FG fault when starting capstan.

FG fault during normal capstan
operations.

FG fault when starting drum.

PG fault when starting drum.

FG fault during normal drum
operations.

PG fault during normal drum
operations.

Phase fault during normal drum
operations.

Use the InfoLITHIUM battery.

Remove the cassette, and insert it again after one hour.

Clean with the optional cleaning cassette.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

Remove the battery or power cable, connect, and perform
operations from the beginning.

— 9 —

E

E

E

E

6

1

6

1

6

2

6

2

0

0

1

0

0

0

0

1

Difficult to adjust focus
(Cannot initialize focus.)

Zoom operations fault
(Cannot initialize zoom lens.)

Handshake correction function does not
work well. (With pitch angular velocity
sensor output stopped.)

Handshake correction function does not
work well. (With yaw angular velocity
sensor output stopped.)

Inspect the lens block focus reset sensor (Pin qs of CN301 of VC-
272 board) when focusing is performed when the control dial is
rotated in the focus manual mode and the focus motor drive circuit
(IC301 of VC-272 board) when the focusing is not performed.

Inspect the lens block zoom reset sensor (Pin qf of CN301 of VC-
272 board) when zooming is performed when the zoom switch is
operated and the zoom motor drive circuit (IC301 of VC-272 board)
when zooming is not performed.

Inspect pitch angular velocity sensor (SE750 of SI-033 board)
peripheral circuits.

Inspect yaw angular velocity sensor (SE751 of SI-033 board)
peripheral circuits.

1-1

This section is extracted from instruction
manual. (CCD-TR648E/TR748E (3-072-
312-11))

• Recording a picture (p. 25)
• Playing back a tape (p. 34)

Functions to adjust exposure in the recording mode
• BACK LIGHT (p. 30)
• NightShot (p. 31)
• PROGRAM AE (p. 46)
• Manual exposure (p. 49)
• Built-in light (p. 57)

Functions to give images more impact
• Digital zoom (p. 27)

The default setting is set to OFF. (To zoom greater than 20

×

, select the digital zoom power

in D ZOOM in the menu settings.)

• FADER (p. 41)
• Picture effect (p. 44)
• TITLE (p. 52)

Function to give a natural appearance to your recordings
• Manual focus (p. 50)

Functions to use in editing in the recording mode
• Wide mode (p. 39)
• Date and time (p. 33)
• ORC [MENU] (p. 76)

Function to use after recording
• Easy Dubbing (p. 63)

1

2

3

4

5

6

1

Беспроводный пульт дистанционного
управления (1) (стр. 116)

2

Сетевой адаптер переменного тока
AC-L10A/L10B/L10C (1), пpовод
электропитания (1) (стр. 15)

3

Батарейный блок NP-FM30 (1) (стр. 14, 15)

4

Батарейка R6 (размера АА) для пульта
дистанционного управления (2)
(стр. 117)

5

Соединительный кабель аудио/видео
(1) (стр. 37)

6

 (1) (стр. 111)

7

Крышка объектива (1) (стр. 25, 115)

8

21-штырьковый адаптер (1) (стр. 38)
(Только модель CCD-TR748E)

Содержание записи не может быть
компенсировано в случае, если запись или
воспроизведение не выполнены из-за
неисправности видеокамеры, носителя
записи и т.п.

Убедитесь, что следующие принадлежности
прилагаются к Вашей видеокамере.

7

8

Make sure that the following accessories are
supplied with your camcorder.

1

 Wireless Remote Commander (1)

(p. 116)

2

 AC-L10A/L10B/L10C AC power adaptor (1),

Mains lead (1) (p. 15)

3

 NP-FM30 battery pack (1) (p. 14, 15)

4

 R6 (size AA) battery for Remote

Commander (2) (p. 117)

5

 A/V connecting cable (1) (p. 37)

6

 Shoulder strap (1) (p. 111)

7

Lens cap (1) (p. 25, 115)

8

21-pin adaptor (1) (p. 38)
(CCD-TR748E only)

Contents of the recording cannot be
compensated if recording or playback is not
made due to a malfunction of the camcorder,
storage media, etc.

This chapter introduces you to the basic features of your
camcorder. See the page in parentheses “( )” for more
information.

Open the DC IN
jack cover.

Connect the plug with
its v mark facing up.

Use the battery pack when using your camcorder outdoors (p. 14).

AC power adaptor (supplied)

3

Close the cassette
compartment by
pressing the 

 mark

on the cassette
compartment. The
cassette compartment
automatically goes
down.
Close the lid of the
cassette compartment.

1

Open the lid of the
cassette compartment,
and press Z EJECT.
The cassette
compartment opens
automatically.

2

Insert a cassette
into the cassette
compartment
with its window
facing out and
the write-protect
tab on the
cassette up.

EJE

CT

2

Set the POWER
switch to CAMERA
while pressing the
small green button.
The picture appears
in the viewfinder.

1

Remove the lens cap.

Viewfinder
Use the viewfinder placing your eye against its eyecup.
The picture in the viewfinder is black and white.
Adjust the viewfinder lens to your eyesight (p. 28).

NOTE
Do not pick up your camcorder by
the viewfinder or the battery pack.

2

Press m to rewind the tape.

1

Set the POWER
switch to PLAYER
while pressing the
small green button.

When you purchase your camcorder, the clock setting is set to off. If you want to record
the date and time for a picture, set the clock setting before recording (p. 21).

3

Press START/STOP.
Your camcorder
starts recording. To
stop recording, press
START/STOP again.

C

A

M

ER

A

PL

A

Y

E

R

O

F

F

(C

H

G

)

POWER

C

A

M

ER

A

PL

A

Y

E

R

O

F

F

(C

H

G

)

POWER

REW

PLAY

C

A

M

ER

A

PL

A

Y

E

R

O

F

F

(C

H

G

)

POW

ER

3

Press N to start playback.

1-2

Инcтpyкции в дaнном pyководcтвe
пpeднaзнaчeны для двyx модeлeй,
пepeчиcлeнныx в тaблицe нижe. Прежде чем
приступить к ознакомлению с данным
руководством и эксплуатации Вашей
видеокамеры, проверьте номер модели с
нижней стороны видеокамеры. Для
иллюстративных целей используется модель
CCD-TR748E. В противном случае название
модели указывается на рисунках. Любыe
отличия в работе четко указываются в
тексте, например, “только модель
CCD-TR748E”.
При чтении данного руководства учитывайте,
что кнопки и установки на видеокамере
показаны заглавными буквами.
Прим. Установите выключатель POWER в
положение CAMERA.
При выполнении операции на видеокамере
Вы сможете услышать зуммерный сигнал,
подтверждающий выполнение операции.

CCD-

TR648E

TR748E

Digital zoom/

450

×

560

×

Цифpовaя тpaнcфокaция

Системы цветного телевидения отличаются в
зависимости от страны. Для просмотра Ваших
записей на экране телевизора Вам
необходимо использовать телевизор,
основанный на системе PAL.

The instructions in this manual are for the two
models listed in the table below. Before you start
reading this manual and operating your
camcorder, check the model number by looking
at the bottom of your camcorder. The
CCD-TR748E is the model used for illustration
purposes. Otherwise, the model name is
indicated in the illustrations. Any differences in
operation are clearly indicated in the text, for
example, “CCD-TR748E only.”
As you read through this manual, buttons and
settings on your camcorder are shown in capital
letters.
e.g. Set the POWER switch to CAMERA.
When you carry out an operation, you can hear a
beep sound to indicate that the operation is being
carried out.

TV colour systems differ from country to
country. To view your recordings on a TV, you
need a PAL system-based TV.

•Экран ЖКД и искатель изготовлены с

• Не допускайте, чтобы видеокамера

становилась влажной. Предохраняйте
видеокамеру от дождя и морской воды. Если
Вы намочите видеокамеру, то это может
привести к неисправности аппарата, которая
не всегда может быть устранена [a].

• Никогда не оставляйте видеокамеру в месте

с температурой выше 60

°

С, как, например, в

автомобиле, оставленном на солнце или под
прямым солнечным светом [b].

•Будьте осторожны, оставляя видеокамеру

вблизи окна или вне помещения.
Воздействие прямого солнечного света на
экран ЖКД, видоискатель или объектив в
течение длительного времени может
привести к неисправностям [c].

•Не выполняйте съемку солнца

непосредственно. Это может привести к
неисправности Вашей видеокамеры.
Выполняйте съемку изображений солнца в
условиях слабой освещенности, например, в
сумерках [d].

•The LCD screen and the finder are

•Do not let your camcorder get wet. Keep your

camcorder away from rain and sea water.
Letting your camcorder get wet may cause your
camcorder to malfunction. Sometimes this
malfunction cannot be repaired [a].

•Never leave your camcorder exposed to

temperatures above 60°C (140°F ), such as in a
car parked in the sun or under direct sunlight
[b].

•Be careful when placing the camera near a

window or outdoors. Exposing the LCD screen,
the finder or the lens to direct sunlight for long
periods may cause malfunctions [c].

•Do not directly shoot the sun. Doing so might

cause your camcorder to malfunction. Take
pictures of the sun in low light conditions such
as dusk [d].

Передвиньте батарейный блок вниз, чтобы он
защелкнулся на месте.

Пepeдвиньтe бaтapeйный блок в нaпpaвлeнии
cтpeлки, нaжaв pычaжок V BATT.

V

Pычaжок для cнятия
бaтapeи V BATT

Slide the battery pack down until it clicks.

Slide the battery pack out in the direction of the
arrow while pressing V BATT down.

Используйте батарейный блок для Вашей
видеокамеры после его зарядки.
Baшa видeокaмepa paботaeт только c бaтapeйным
блоком “InfoLITHIUM” (cepии M).
Подpобныe cвeдeния о бaтapeйном блокe
“InfoLITHIUM” пpивeдeны нa cтp. 100.
(1) Откройте крышку гнезда DC IN и подсоедините

сетевой адаптер переменного тока, прилагаемый
к Вашей видеокамере, к гнезду DC IN, так чтобы
штекер v был направлен вверх.

(2) Подсоедините провод электропитания к

сетевому адаптеру переменного тока.

(3) Подcоeдинитe пpовод элeктpопитaния к ceтeвой

pозeткe.

(4) Установите переключатель POWER в положение

OFF (CHG). Начнется зарядка. Ocтaвшийcя
зapяд батарейного блока будет указываться в
минутах в окошке дисплея.

Ecли индикaтоp оcтaвшeгоcя зapядa измeнитcя нa

, это знaчит, что ноpмaльнaя зapядкa

зaвepшeнa. Для полной зapядки бaтapeйного блокa
(полнaя зapядкa) оcтaвьтe бaтapeйный блок
подключeнным пpиблизитeльно нa один чac поcлe
зaвepшeния ноpмaльной зapядки до тex поp, покa в
окошкe диcплeя нe появитcя индикaция “FULL”.
Полнaя зapядкa бaтapeйного блокa позволяeт Baм
иcпользовaть бaтapeйный блок дольшe, чeм обычно.

C

A

M

ER

A

PL

A

Y

E

R

O

F

F

(C

H

G

)

POWER

Чиcло нa pиcyнкe окошкa диcплeя можeт
отличaтьcя от чиcлa, котоpоe отобpaжaeтcя
нa видeокaмepe.

Use the battery pack after charging it for your
camcorder.
Your camcorder operates only with the
“InfoLITHIUM” battery pack (M series).
See page 100 for details of the “InfoLITHIUM”
battery pack.
(1) Open the DC IN jack cover and connect the

AC power adaptor supplied with your
camcorder to the DC IN jack with the plug’s v
mark facing up.

(2) Connect the mains lead to the AC power

adaptor.

(3) Connect the mains lead to a wall socket.
(4) Set the POWER switch to OFF (CHG).

Charging begins. The remaining battery time
is indicated in minutes on the display
window.

When the remaining battery indicator changes to

, normal charge is completed. To fully charge

the battery (full charge), leave the battery pack
attached for about one hour after normal charge
is completed until “FULL“ appears in the display
window. Fully charging the battery allows you to
use the battery longer than usual.

The number in the illustration of the display
window may differ from that on your camcorder.