Sony CCD-TR317E / CCD-TR417E / CCD-TR427E / CCD-TR617E / CCD-TR717E / CCD-TR918E / CCD-TRV37E / CCD-TRV47E / CCD-TRV48E / CCD-TRV57E / CCD-TRV67E / CCD-TRV87E Service Manual ▷ View online
2-10
VC-234
MA
-
Boar
d
SE-Board
PJ-Board
DD-134
CF-
Board
Cabinet (R) block assembly
DP-78 harness (8P)
(TRV model)
(TRV model)
CF-66 board (TR model)
CF-67 board (TRV model)
CF-67 board (TRV model)
CPC-7 jig
(J-6082-382-A)
(J-6082-382-A)
Mechanism deck
VC-234 board
SE-100 board
(TR steady shot model)
SE-101 board
(TRV model)
(TR steady shot model)
SE-101 board
(TRV model)
Adjustment remote
commander (RM-95)
commander (RM-95)
FP-43 flexible board
(20P)
(20P)
MA-374 board (TR model)
MA-375 board (TRV model)
MA-375 board (TRV model)
Front panel block assembly
PJ-99 board (TR model)
PJ-100 board (TRV model)
PJ-100 board (TRV model)
VL-28 board (TR video light model)
VL-29 board (TRV video light model)
VL-29 board (TRV video light model)
Lens block
FFC-001 flexible flat cable (45P)
Control switch block
(FK-8500) (10P)
(FK-8500) (10P)
Control switch block
(SS-9700)
(SS-9700)
EJ-29 board (TR model)
EJ-30 board (TRV model)
EJ-30 board (TRV model)
DD-134 board
AC IN
DC IN
AC POWER
ADAPTOR
ADAPTOR
Flexible board
(from Lens block)
(24P)
(from Lens block)
(24P)
FP-147 flexible board (14P)
Battery panel
block assembly
block assembly
CD-239 board (TR model)
CD-240 board (TRV model)
CD-240 board (TRV model)
[CONNECTION DIAGRAM FOR SERVICE POSITION (Mainly for voltage measurement and check)]
MA-374/375, CF-66/67, CD-239/240, VL-28/29, PJ-99/100, SE-100/101, EJ-29/30, DD-134, VC-234 BOARDS,
MECHANISM DECK-2
MA-374/375, CF-66/67, CD-239/240, VL-28/29, PJ-99/100, SE-100/101, EJ-29/30, DD-134, VC-234 BOARDS,
MECHANISM DECK-2
2-11
2-10.CF-66 BOARD, LIQUID CRYSTAL DISPLAY PANEL, BACK LIGHT (TR MODEL)
CF-66
CF-66
CF-66
2
Control switch block
(MR-8500) (8P)
5
Claw
8
3
FFC-289 flexible flat cable (4P)
2
FP-52 flexible
board (26P)
1
FFC-001 flexible
flat cable (45P)
4
Two tapping
screws
(B2
(B2
×
5)
6
Lithium
battery retainer
7
Five tapping
screws
(B2
(B2
×
5)
2
Liquid crystal
display panel (26P)
3
CF-66 board
6
Liquid crystal
display panel
1
Two claws
4
Four claws
5
LCD holder (97)
3
CF-66 board
1
Two claws
4
Four claws
5
LCD holder (92)
6
Indication LCD
block assembly
4
1
Remove the
two solderings
2
Remove the
two solderings
3
Four claws
5
Back light
REMOVING THE LIQUID CRYSTAL DISPLAY PANEL
REMOVING THE INDICATION LCD BLOCK ASSEMBLY
REMOVING THE BACK LIGHT
(TR918E MODEL)
(TR NIGHT SHOT MODEL)
(TR918E MODEL)
2-12
2-11.CF-67 BOARD, SPEAKER, PUSH SWITCH (TRV MODEL)
2-12.LCD BLOCK ASSEMBLY, HINGE ASSEMBLY (TRV MODEL)
CF-67
1
FFC-001 flexible
flat cable (45P)
2
FFC-289 flexible flat cable (4P)
3
FP-62 flexible board (8P)
(TRV87E model)
4
Control switch block
(MR-8500) (8P)
5
DP-78 harness (12P)
6
DP-78 harness (6P)
7
Push switch (2P)
Push switch
qg
Push switch
8
Speaker
(2.8CM) (2P)
Speaker harness
Connector
Connector
Connector
Connector
Folding
qs
Speaker (2.8CM)
qd
SP spacer (97)
qa
Speaker
retainer (93)
9
Five tapping
screws (B2
×
5)
qf
Tapping screw (B2
×
5)
q;
CF-67 board
(PRECAUTION DURING INSTALLATION)
(PRECAUTION DURING INSTALLATION)
CF-67 board
CF-67 board
CF-67
VC-234
Board
Board
1
DP-78 harness (8P)
5
Hing cover
(R) (93)
3
DP-78 harness (6P)
2
DP-78 harness (12P)
4
Three tapping
screws (B2
×
5)
6
Four tapping
screws (B2
×
5)
7
LCD block assembly
1
Two screws
(M2
×
4),
lock ace, p2
9
Two tapping
screws (B2
×
7)
q;
7
Screw (M1.7
×
2)
(IB lock)
8
FP-152 flexible
board (6P)
8
FP-152 flexible board
FP-152 flexible board
1
Four claws
9
Hinge (98)
assembly
Hinge (98) assembly
2
Hinge cover
(C) (93)
6
Harness clamp
4
Two claws
Claw
Dowel
3
Hinge cover
(M) (98)
2
Two tapping screws
(B2
×
5)
3
Two claws
4
P cabinet (C) (98)
7
DP-78 harness (8P)
5
DP-78 harness
6
DP-78 harness (6P)
5
DP-78 harness (12P)
(PRECAUTION DURING INSTALLATION)
REMOVING THE HINGE ASSEMBLY
2-13
Hinge assembly
Straight in the direction
of attachemnt
of attachemnt
Hinge cover (M)
Hinge cover (C)
Hinge cover (M)
(8P)
(Left side)
(Right side)
•
Place a longer harness to the left side.
•
Place the shortest harness (8P) in the right side to the bottom.
•
Place the hooking portion of the harness clamp to
the right side.
•
Place the harness clamp in the left of the tie
band himeron that ties the three wires.
•
Insert the DP-78 harness in the internal groove of
the harness clamp.
Note:
•
The harness must not be pinched.
•
The sheet of the FP-152 flexible board must not be peeled over.
Note:
•
Be sure that the harnesses do not climb over the three ribs of the guide.
•
Be sure that the harnesses are not pinched between the harness clamp and the shaft.
Note:
•
Be sure that the harness is not pinched by the hinge cover.
•
Be sure that the harness can move at the entrance/exit of the hinge assembly.
•
While holding the harness clamp, turn the hinge upside down.
•
While being careful not to twist the harness, insert the
longer harness (8P) into the shallow groove and insert the
other harnesses (6P, 12P) to the deeper groove.
other harnesses (6P, 12P) to the deeper groove.
•
Hold the harness so that the harness must not come out from the groove.
•
Be careful so that the hinge cover (M) must not contact with the switch
of the FP-152 flexible board.
•
While holding the hinge cover (M) so as not to be dropped,
turn the hinge cover (C) upside down.
•
Route the harness inside the cutout of the hinge cover (M).
•
Attach the hinge cover (C) straight. (Claw hooks at the four positions.)
•
Make an attempt to move the harness gently at the entrance/exit of the hinge
assembly to make sure that the harness can move.
Longer harness (8P)
Two shorter harnesses (6P, 12P)
(8P)
(6P)
(6P)
(12P)
(12P)
Harness clamp
Harness clamp
Hinge bracket
Shaft
DP-78 harness
Himeron
Hooking
portion
portion
Attach the harness clamp to the DP-78 harness.
Hook the two claws of the harness clamp on the hinge bracket.
Then attach it to the shaft of the hinge assembly.
Then attach it to the shaft of the hinge assembly.
Fix the harness using the harness guide of the hinge assembly.
Attach the hinge cover (M) to the hinge assembly.
Attach the hinge cover (C) to the hinge cover (M).
[ASSEMBLING THE HARNESS CLAMP]
[INSTALLING THE HARNESS CLAMP]
[HARNESS PROCESSING]
[ATTACHING THE HINGE COVER (M)]
[ATTACHING THE HINGE COVER (C)]
2-13.HARNESS PROCESSING OF THE HINGE ASSEMBLY (TRV MODEL)
Click on the first or last page to see other CCD-TR317E / CCD-TR417E / CCD-TR427E / CCD-TR617E / CCD-TR717E / CCD-TR918E / CCD-TRV37E / CCD-TRV47E / CCD-TRV48E / CCD-TRV57E / CCD-TRV67E / CCD-TRV87E service manuals if exist.