Sony CCD-TR317 / CCD-TR517 / CCD-TRV17 / CCD-TRV37 / CCD-TRV47 / CCD-TRV57 / CCD-TRV57P / CCD-TRV67 / CCD-TRV87 / CCD-TRV87P Service Manual ▷ View online
CCD-TR317/TR517
CCD-TRV17/TRV37/TRV47/TRV57/
TRV57P/TRV67/TRV87/TRV87P
RMT-708
US Model
CCD-TR517/TRV37/TRV57/TRV67/TRV87
Canadian Model
CCD-TR517/TRV17/TRV37/TRV57/TRV87
E Model
CCD-TR317/TR517/TRV37/
TRV47/TRV57/TRV57P/
TRV67/TRV87/TRV87P
Hong Kong Model
Korea Model
CCD-TR317/TRV47/TRV57/
TRV67/TRV87
Brazilian Model
CCD-TR317/TR517/TRV37/TRV67
Argentina Model
CCD-TR517/TRV37/TRV67
Tourist Model
CCD-TRV47/TRV57/TRV67/TRV87
SERVICE MANUAL
VIDEO CAMERA RECORDER
CCD-TRV67/TRV87/TRV87P
MICROFILM
B200 MECHANISM
For MECHANISM ADJUSTMENT, refer to
the “8mm Video MECHANICAL
ADJUSTMENT MANUAL ” (9-973-801-11).
the “8mm Video MECHANICAL
ADJUSTMENT MANUAL ” (9-973-801-11).
SPECIFICATIONS
Photo : CCD-TRV87
VIDEO CAMERA RECORDER
CCD-TR317/TR517/TRV17/TRV37/TRV47/TRV57/TRV57P
— Continued on next page —
Ver 1.4 2004. 05
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
• Abbreviation
HK
: Hong Kong model
• SUPPLIED ACCESSORIES
Check that the following accessories are supplied with your
camcorder.
camcorder.
— 3 —
T
a
b
le f
or diff
erence of function
•
A
b
b
re
via
tion
CND
: Canadian model
HK
: Hong K
ong model
KR
: K
o
rea model
BR
: Brazilian model
AR
: Argentina
model
JE
: T
our
ist
model
CCD-
TR
V87
US,CND,
E,HK,KR,
JE
RMT
-708
Hi8
760H
1/4
20
×
40
×
360
×
B/W
2.5
a
a
a
a
a
a
Stereo
a
SUPER
a
a
CCD-
TR
V87P
E
RMT
-708
Hi8
760H
1/4
20
×
40
×
360
×
B/W
2.5
a
a
a
a
a
a
Stereo
a
SUPER
a
a
CCD-
TR317
E,HK,KR,
BR
8
510H
1/6
20
×
40
×
200
×
B/W
a
Mono
a
VF-129
CCD-
TR517
US,CND,
E,BR,AR
8
510H
1/6
20
×
40
×
200
×
Color
a
Mono
a
VF-141
LB-62
Remark
RMT
-708:
with IC301 of MA-374/375 boar
d.
Hi8: with S-VIDEO jack.
B/W
: with
VF-129 board
.
Color
: with
VF-141, LB-62 board
.
2.5: with PD-117 board.
a
: with IC451 of SE-101 board.
a
: with IC203 of
VC-234 board
.
a
: with IC203 of
VC-234 board
.
a
: with J451 of SE-101 board.
SUPER: with IC203 of
VC-234 boar
d
.
a
: with IC751 of
VC-234 board
.
a
: with
VL-29 board
.
Model
Destination
Remote commander
8/Hi8
CCD imager
CCD imager size (inch)
Lens Optical
Digital zoom 1
Digital zoom 2
EVF
LCD panel (inch)
LCD, Character
Back light, LCD
VTR REC
Steady shot
DIGIT
AL EFFECT
Photo mode
Audio system
Headphone jack
Night shot
LASER LINK
V
ideo Light
CD board
CF board
EJ board
PD board
MA board
PJ board
SE board
VF board
LB board
VL board
CCD-
TR
V17
CND
8
510H
1/6
20
×
40
×
80
×
B/W
2.5
a
Mono
a
a
a
CCD-
TR
V37
US,CND,
E,BR,AR
8
510H
1/6
20
×
40
×
200
×
B/W
2.5
a
Mono
a
a
a
CCD-
TR
V47
E,HK,KR,
JE
RMT
-708
8
510H
1/6
20
×
40
×
200
×
B/W
2.5
a
Mono
a
a
CCD-
TR
V57
US,CND,
E,HK,KR,
JE
RMT
-708
8
510H
1/4
20
×
40
×
360
×
B/W
2.5
a
a
Mono
a
a
a
CCD-
TR
V57P
E
RMT
-708
8
510H
1/4
20
×
40
×
360
×
B/W
2.5
a
a
Mono
a
a
a
CD-240
CF-67
EJ-30
PD-117
MA-375
PJ-100
SE-101
VF-129
VL-29
CCD-
TR
V67
US,E,HK,
KR,BR,
AR,JE
RMT
-708
Hi8
510H
1/4
20
×
40
×
360
×
B/W
2.5
a
a
Mono
a
a
a
CD-239
CF-66
EJ-29
MA-374
PJ-99
VL-29
— 4 —
TABLE OF CONTENTS
SERVICE NOTE
1.
POWER SUPPLY DURING REPAIRS ····························· 7
2.
TO TAKE OUT A CASSETTE WHEN NOT EJECT
(FORCE EJECT) ································································ 7
(FORCE EJECT) ································································ 7
SELF-DIAGNOSIS FUNCTION
1.
Self-diagnosis Function ······················································ 8
2.
Self-diagnosis Display ························································ 8
3.
Service Mode Display ························································ 8
3-1.
Display Method ·································································· 8
3-2.
Switching of Backup No. ··················································· 8
3-3.
End of Display ···································································· 8
4.
Self-diagnosis Code Table ·················································· 9
1.
GENERAL
Quick Start Guide ······································································ 1-1
Getting Started ··········································································· 1-1
Getting Started ··········································································· 1-1
Using this manual ·································································· 1-1
Checking supplied accessories ·············································· 1-2
Step 1: Preparing the power supply ······································· 1-2
Checking supplied accessories ·············································· 1-2
Step 1: Preparing the power supply ······································· 1-2
Installing the battery pack ········································· 1-2
Charging the battery pack ········································· 1-2
Connecting to a wall outlet ······································· 1-3
Charging the battery pack ········································· 1-2
Connecting to a wall outlet ······································· 1-3
Step 2: Inserting a cassette ···················································· 1-3
Recording – Basics ···································································· 1-4
Recording a picture ································································ 1-4
Shooting backlit subjects (BACK LIGHT) ···························· 1-5
Shooting in the dark (NightShot) ··········································· 1-5
Superimposing the date and time on pictures ························ 1-5
Checking the recording
– END SEARCH/EDITSEARCH/Rec Review ·················· 1-5
Shooting backlit subjects (BACK LIGHT) ···························· 1-5
Shooting in the dark (NightShot) ··········································· 1-5
Superimposing the date and time on pictures ························ 1-5
Checking the recording
– END SEARCH/EDITSEARCH/Rec Review ·················· 1-5
Playback – Basics ······································································ 1-6
Playing back a tape ································································ 1-6
Viewing the recording on TV ················································ 1-6
Viewing the recording on TV ················································ 1-6
Advanced Recording Operations ··············································· 1-7
Recording a still image on a tape
– Tape Photo recording (CCD-TRV87/TRV87P only) ······· 1-7
Using the wide mode ····························································· 1-8
Using the fader function ························································ 1-8
Using special effects – Picture effect ····································· 1-9
Using special effects
– Digital effect (CCD-TRV87/TRV87P only) ···················· 1-9
Using the PROGRAM AE function ····································· 1-10
Adjusting the exposure manually ········································ 1-10
Focusing manually ······························································· 1-11
Superimposing a title ··························································· 1-11
Making your own titles ························································ 1-11
Using the built-in light ························································· 1-12
– Tape Photo recording (CCD-TRV87/TRV87P only) ······· 1-7
Using the wide mode ····························································· 1-8
Using the fader function ························································ 1-8
Using special effects – Picture effect ····································· 1-9
Using special effects
– Digital effect (CCD-TRV87/TRV87P only) ···················· 1-9
Using the PROGRAM AE function ····································· 1-10
Adjusting the exposure manually ········································ 1-10
Focusing manually ······························································· 1-11
Superimposing a title ··························································· 1-11
Making your own titles ························································ 1-11
Using the built-in light ························································· 1-12
Advanced Playback Operations ··············································· 1-12
Playing back a tape with digital effects
(CCD-TRV87/TRV87P only) ··········································· 1-12
(CCD-TRV87/TRV87P only) ··········································· 1-12
Editing ····················································································· 1-13
Dubbing a tape ····································································· 1-13
Recording video or TV programs
(CCD-TRV87/TRV87P only) ··········································· 1-13
Recording video or TV programs
(CCD-TRV87/TRV87P only) ··········································· 1-13
Customizing Your Camcorder ················································· 1-13
Changing the menu settings ················································· 1-13
Resetting the date and time ·················································· 1-15
Resetting the date and time ·················································· 1-15
Additional Information ···························································· 1-15
Usable cassettes and playback modes ·································· 1-15
Changing the lithium battery in your camcorder ················· 1-16
Troubleshooting ··································································· 1-16
Self-diagnosis display ·························································· 1-17
Warning indicators and messages ········································ 1-17
Using your camcorder abroad ·············································· 1-18
Maintenance information and precautions ··························· 1-18
Changing the lithium battery in your camcorder ················· 1-16
Troubleshooting ··································································· 1-16
Self-diagnosis display ·························································· 1-17
Warning indicators and messages ········································ 1-17
Using your camcorder abroad ·············································· 1-18
Maintenance information and precautions ··························· 1-18
Quick Reference ······································································ 1-19
Identifying the parts and controls ········································ 1-19
2.
DISASSEMBLY
2-1.
PD-117 BOARD, BACK LIGHT, LIQUID CRYSTAL
DISPLAY PANEL (TRV MODEL) ································ 2-2
DISPLAY PANEL (TRV MODEL) ································ 2-2
2-2.
FRONT PANEL ASSEMBLY, MA-374/375 BOARD ···· 2-3
2-3.
CABINET (R) BLOCK ASSEMBLY ····························· 2-4
2-4.
MECHANISM DECK-1 ················································· 2-5
2-5.
EVF BLOCK ASSEMBLY ············································· 2-6
2-6.
VF-129 BOARD (B/W EVF MODEL) ··························· 2-7
2-7.
VF-141, LB-62 BOARDS (COLOR EVF MODEL) ······ 2-8
2-8.
LENS DEVICE, CD-239/240 BOARD ·························· 2-9
2-9.
DD-134, SE-101 BOARDS ··········································· 2-10
2-10. VC-234, EJ-29/30 BOARDS,
MECHANISM DECK-2 ··············································· 2-10
2-11. CF-66 BOARD, LIQUID CRYSTAL DISPLAY PANEL
(TR MODEL) ································································ 2-11
2-12. CF-67 BOARD, SPEAKER, PUSH SWITCH
(TRV MODEL) ····························································· 2-12
2-13. LCD BLOCK ASSEMBLY, HINGE ASSEMBLY
(TRV MODEL) ····························································· 2-12
2-14. HARNESS PROCESSING OF THE HINGE
ASSEMBLY (TRV MODEL) ······································· 2-13
2-15. CIRCUIT BOARDS LOCATION ································· 2-14
2-16. FLEXIBLE BOARDS LOCATION ······························ 2-15
2-16. FLEXIBLE BOARDS LOCATION ······························ 2-15
3.
BLOCK DIAGRAMS
3-1.
OVERALL BLOCK DIAGRAM (1/2) ··························· 3-3
3-2.
OVERALL BLOCK DIAGRAM (2/2) ··························· 3-5
3-3.
CAMERA/VIDEO BLOCK DIAGRAM (1/2) ··············· 3-7
3-4.
CAMERA/VIDEO BLOCK DIAGRAM (2/2) ··············· 3-9
3-5.
VTR/CAMERA CONTROL BLOCK DIAGRAM ······· 3-11
3-6.
SERVO BLOCK DIAGRAM ········································ 3-13
3-7.
MODE CONTROL BLOCK DIAGRAM (1/2) ············ 3-15
3-8.
MODE CONTROL BLOCK DIAGRAM (2/2) ············ 3-17
3-9.
AUDIO BLOCK DIAGRAM (1/2) ······························· 3-19
3-10. AUDIO BLOCK DIAGRAM (2/2) ······························· 3-21
3-11. LCD BLOCK DIAGRAM (TRV MODEL) ·················· 3-23
3-12. B/W EVF BLOCK DIAGRAM ···································· 3-25
3-13. COLOR EVF BLOCK DIAGRAM ······························ 3-27
3-14. POWER BLOCK DIAGRAM (1/2) ······························ 3-29
3-15. POWER BLOCK DIAGRAM (2/2) ······························ 3-31
3-11. LCD BLOCK DIAGRAM (TRV MODEL) ·················· 3-23
3-12. B/W EVF BLOCK DIAGRAM ···································· 3-25
3-13. COLOR EVF BLOCK DIAGRAM ······························ 3-27
3-14. POWER BLOCK DIAGRAM (1/2) ······························ 3-29
3-15. POWER BLOCK DIAGRAM (2/2) ······························ 3-31
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-1.
FRAME SCHEMATIC DIAGRAM (1/2) ······················· 4-1
FRAME SCHEMATIC DIAGRAM (2/2) ······················· 4-3
FRAME SCHEMATIC DIAGRAM (2/2) ······················· 4-3
4-2.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS ············································ 4-5
SCHEMATIC DIAGRAMS ············································ 4-5
• CD-239/240 (CCD IMAGER)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ······························ 4-7
SCHEMATIC DIAGRAM ······························ 4-7
• VC-234 (CAMERA PROCESSOR)(1/13)
SCHEMATIC DIAGRAM .............................. 4-9
• VC-234 (Y/C PROCESSOR)(2/13)
SCHEMATIC DIAGRAM ···························· 4-11
• VC-234 (MEMORY)(3/13)
SCHEMATIC DIAGRAM ···························· 4-13
• VC-234 (FOCUS/ZOOM MOTOR DRIVE)(4/13)
SCHEMATIC DIAGRAM ···························· 4-15
• VC-234 (REC/PB AMP)(5/13)
SCHEMATIC DIAGRAM ···························· 4-17
• VC-234 (LINE IN/OUT)(6/13)
SCHEMATIC DIAGRAM ···························· 4-19
• VC-234 (IR TRANSMITTER)(7/13)
SCHEMATIC DIAGRAM ···························· 4-21