DOWNLOAD Sony CCD-TR315 / CCD-TR416 / CCD-TR416PK / CCD-TR516 / CCD-TR516PK / CCD-TR716 / CCD-TRV16 / CCD-TRV16PK / CCD-TRV36 / CCD-TRV36PK / CCD-TRV43 / CCD-TRV46 / CCD-TRV46PK (serv.man2) Service Manual ↓ Size: 17.11 MB | Pages: 127 in PDF or view online for FREE

– 5 –

Battery terminal 

‘

DC IN terminal

Battery SIG terminal

Battery switch

Battery terminal 

’

6

Pull the timing belt in the direction of arrow 

A

 

with a pinsette while pressing the cassette lid 
(take care not to damage) to adjust the 
bending of a tape.

7

Let go your hold the cassette 
lid and rise the cassette 
compartment to take out a cassette.

A

Pinsette

Timing belt

Press the cassette lid not to rise the 
cassette compartment

+

–

[DC power supply]

(+5V)

Loading motor

Adjust the bending of a tape

Timing belt

1 Refer to 2-1. to remove the front panel block.
2 Refer to 2-4. to remove the cabinet (R) assembly.
3 Refer to 2-6. to remove the battery panel block.
4 Refer to 2-7. to remove the cabinet (L) block.
5 Add +5V from the DC POWER SUPPLY and unload with a

pressing the cassette lid.

In this unit, about 10 seconds after power is supplied (8.4V) to the
battery terminal using the service power cord (J-6082-223-A), the
power is shut off so that the unit cannot operate.
This following three methods are available to prevent this. Take
note of which to use during repairs.

Connect the servicing remote commander RM-95 (J-6082-053-B)
to the LANC jack, and set the remote commander switch to the
“ADJ” side.

Press the battery switch of the battery terminal using adhesive tape,
etc.

Use the DC IN terminal. (Use the AC power adaptor.)

– 6 –

Note: The self-diagnosis display data will be backed up by the coin-type lithium battery. When this coin-type lithium battery is

disconnected, the self-diagnosis data will be lost by initialization.

When problems occur while the unit is operating, the self-diagno-
sis function starts working, and displays on the viewfinder or Dis-
play window what to do. This function consists of two display; self-
diagnosis display and service mode display.
Details of the self-diagnosis functions are provided in the Instruc-
tion manual.

When problems occur while the unit is operating, the counter of the
viewfinder or Display window shows a 4-digit display consisting
of an alphabet and numbers, which blinks at 3.2 Hz. This 5-charac-
ter display indicates the “repaired by:”, “block” in which the prob-
lem occurred, and “detailed code” of the problem.

The service mode display shows up to six self-diagnosis codes shown in the past.

While pressing the “STOP” key, set the switch from OFF to “VTR or PLAYER”, and continue pressing the “STOP” key for 5 seconds
continuously. The service mode will be displayed, and the counter will show the backup No. and the 5-character self-diagnosis codes.

By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the
problem occurred. (If the number of problems which occurred is less than 6, only the number of problems which occurred will be shown.)
[1] : Occurred first time

[4] : Occurred fourth time

[2] : Occurred second time

[5] : Occurred fifth time

[3] : Occurred third time

[6] : Occurred the last time

Turning OFF the power supply will end the service mode display.

Viewfinder

Display window

Blinks at 3.2 Hz

Refer to page7
Self-diagnosis Code table

C : Corrected by customer
H : Corrected by dealer
E : Corrected by service engineer

Repairede by :

Block

Detailed Code

Indicates the appropriate step to be taken
E. g.
31 ... Reload the tape.
32 ... Turn on power again.

Viewfinder

Display window

Lights up

Order of previous errors

Backup No.

Self-diagnosis codes

Display window

Control dial

– 7 –

Remove the cassette, and insert it again after one hour.
Clean with the optional cleaning cassette.
Use the InfoLITHIUM battery.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.

Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Inspect the lens block focus reset sensor (Pin 

!ª of CN551 of VC-215

board) when focusing is performed when the focus dial is rotated in the
focus manual mode and the focus motor drive circuit (IC552 of VC-215
board) when the focusing is not performed.
Note : Use the remote commander RM-95 only for the model without

the focus dial.

Inspect the lens block zoom reset sensor (Pin 

@¡ of CN551 of VC-215

board) when zooming is performed when the zoom lens is operated and
the zoom motor drive circuit (IC552 of VC215 board) when zooming is
not performed.

Inspect yaw angular velocity sensor (SE451 of SE-80/81 board)
peripheral circuits.

Inspect pitch angular velocity sensor (SE452 of SE-80/81 board)
peripheral circuits.

Condensation.
Video head is dirty.
Non-standard battery is used.
LOAD direction. Loading does not
complete within specified time
UNLOAD direction. Loading does not
complete within specified time
T reel side tape slacking when unloading.
S reel side tape slacking when unloading.
T reel fault
S reel fault
FG fault when starting capstan
FG fault during normal capstan operations
FG fault when starting drum
PG fault when starting drum
FG fault during normal drum operations
PG fault during normal drum operations
Phase fault during normal drum operations

LOAD direction loading motor time-out

UNLOAD direction loading motor time-
out

T reel side tape slacking when unloading.

S reel side tape slacking when unloading.

T reel fault

S reel fault

FG fault when starting capstan

FG fault during normal capstan operations

FG fault when starting drum

PG fault when starting drum

FG fault during normal drum operations

PG fault during normal drum operations

Phase fault during normal drum operations

Difficult to adjust focus
(Cannot initialize focus.)

Zoom operations fault
(Cannot initialize zoom lens.)

Handshake correction function does not
work well.(With pitch angular velocity
sensor output stopped)
Handshake correction function does not
work well.(With yaw angular velocity
sensor output stopped)

Self-diagnosis Code

Repaired b

y:

Block

Function

Detailed

Code

Symptom/State

Correction

C
C
C

C

C

C
C
C
C
C
C
C
C
C
C
C

C

C

C

C

C

C

C

C

C

C

C

C

C

E

E

E

E

2

1

2

2

2

3

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

1

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

3

2

6

1

6

1

6

2

6

2

0

0

0

0

0

0

1

0

1

1

2

0

2

1

2

2

2

3

3

0

3

1

4

0

4

1

4

2

4

3

4

4

1

0

1

1

2

0

2

1

2

2

2

3

3

0

3

1

4

0

4

1

4

2

4

3

4

4

0

0

1

0

0

0

0

1

– 8 –

1. Power Supply During Repairs ................................................ 5
2. To Take out a Cassette when not Eject (Force Eject) .............. 5

1. Self-diagnosis function ............................................................ 6
2. Self-diagnosis Display ............................................................. 6
3. Service Mode Display ............................................................. 6

3-1. Display Method ................................................................ 6
3-2. Switching of Backup No. ................................................. 6
3-3. End of Display ................................................................. 6

4. Self-diagnosis Code Table ....................................................... 7

This section is extacked from instruction manual of
CCD-TRV36/TRV43/TRV46.

Using this manual ...................................................................... 1-1
Checking supplied accessories .................................................. 1-1
Installing and Charging the battery pack ................................... 1-1
Inserting a cassette ..................................................................... 1-2
Camera recording ...................................................................... 1-2
Hints for better Shooting ........................................................... 1-4
Checking the recorded picture ................................................... 1-4
Playing back a tape .................................................................... 1-5
Searching for the end of the picture .......................................... 1-5
Using alternative power sources ................................................ 1-6
Changing the mode settings ...................................................... 1-6
Shooting with backlighting ....................................................... 1-7
Using the FADER function ....................................................... 1-7
Shooting in the dark (NightShot) .............................................. 1-8
Using the wide mode function ................................................... 1-8
Using the PROGRAM AE function ........................................... 1-9
Focusing manually ..................................................................... 1-9
Enjoying picture effect ............................................................ 1-10
Adjusting the exposure ............................................................ 1-10
Superimposing a title ............................................................... 1-11
Making your own titles ............................................................ 1-11
Recording with the date/time ................................................... 1-11
Optimizing the recording condition ......................................... 1-12
Using the built-in light ............................................................. 1-12
Releasing the STEADYSHOT function .................................. 1-12
Watching on a TV screen ......................................................... 1-13
Editing onto another tape ......................................................... 1-13
Changing the lithium battery in the camcoder ........................ 1-13
Resetting the date and time ...................................................... 1-14
Simple setting of clock by time difference .............................. 1-14
Usable cassettes and playback modes ..................................... 1-14
Tips for using the battery pack ................................................ 1-15
Maintenance information and precautions .............................. 1-15
Using your camcorder abroad ................................................. 1-17
Truoble check .......................................................................... 1-17
Self-diagnosis display .............................................................. 1-18
Identifying the parts ................................................................. 1-18
Warning Indicators .................................................................. 1-20

2-1. Removal of Front Panel Block and Video Light Block .... 2-1
2-2. Removal of LB-54, VF-119 and

VF-120 Boards (Color View Finder Models) .................. 2-2

2-3. Removal of VF-99 Board and

CRT Assembly (B/W View Finder Models) ..................... 2-2

2-4. Removal of Cabinet (R) Block ......................................... 2-3
2-5. Removal of Cassette Lid Assembly ................................. 2-3
2-6. Removal of Battery Panel Block .......................................... 2-3
2-7. Removal of Cabinet (L) Block ......................................... 2-4
2-8. Removal of Control Switch Block (FK-8500) ................. 2-4
2-9. Removal of Zoom Lens Block and VL-20/21 Board ....... 2-4
2-10. Removal of DD-117 and PJ-90/91 Boards ....................... 2-4
2-11. Removal of VC-215 abd SE-80/81 Boards ...................... 2-5
2-12. Removal of View Finder Block ........................................ 2-5
2-13. Removal of TR Cover, CF-60 Board and

Display Panel (TR series) ................................................ 2-6

2-14. Removal of IR Cover, CF-61 Board

and LCD Panel (TRV series) ............................................ 2-6

2-15. Service Position ............................................................... 2-7
2-16. Circuit Boards Location ................................................... 2-8
2-17. Flexible Boards and Flat Cables Location ....................... 2-8

3-1. Overall Block Diagram .................................................... 3-1
3-2. Camera/Video 1 Block Diagram ...................................... 3-5
3-3. VTR/Camera Control Block Diagram ............................. 3-9
3-4. Servo Block Diagram ..................................................... 3-12
3-5. Mode Control Block Diagram ........................................ 3-15
3-6. Audio Block Diagram .................................................... 3-19
3-7. LCD Block Diagram (TRV model) .................................... 3-23
3-8. Color EVF Block Diagram (Color EVF model) ............ 3-26
3-9. B/W EVF Block Diagram (B/W EVF model) ............... 3-29
3-10. Power Block Diagram .................................................... 3-33