Sony SDM-S75A / SDM-S75D / SDM-S75E / SDM-S75F / SDM-S95A / SDM-S95AR / SDM-S95D / SDM-S95DR / SDM-S95E / SDM-S95ER / SDM-S95F / SDM-S95FR Service Manual ▷ View online
MENU
SDM-S75A: U/C, AEP, CH
SDM-S75D: U/C, AEP, CH
SDM-S75E: U/C
SDM-S75F: AEP, U/C
SDM-S95A, S95AR: U/C, AEP
SDM-S95D, S95DR: U/C, AEP
SDM-S95E, S95ER: U/C
SDM-S95F: AEP, CH
SDM-S95FR: AEP, U/C
SDM-S75D: U/C, AEP, CH
SDM-S75E: U/C
SDM-S75F: AEP, U/C
SDM-S95A, S95AR: U/C, AEP
SDM-S95D, S95DR: U/C, AEP
SDM-S95E, S95ER: U/C
SDM-S95F: AEP, CH
SDM-S95FR: AEP, U/C
Service Manual
TFT LCD COLOR COMPUTER DISPLAY
SDM-S75A,D,E,F/ SDM-S95A,AR,D,DR,E,ER,F,FR (E)
- 2 -
CONTENTS
Page
PRECAUTIONS
3
SPECIFICATIONS
4
TIMING CHART
5
SIGNAL CONNECTOR PIN
6
EDID data for SDM-S75x
7-8
EDID data for SDM-S95x 9-11
OPERATING INSTRUCTIONS
12
SERVICE MODE
13
WIRING DIAGRAM
14
DISASSEMBLY
15
ADJUSTMENT
16
SERIAL NO. LIST
17
EXPLODED VIEW
18
REPLACEMENT PARTS LIST
19-23
PRECAUTION
WARNING FOR THE SAFETY-RELATED COMPONENT.
• There are some special components used in LCD
monitor that are important for safety. These parts are
marked on the schematic diagram and the
replacement parts list. It is essential that these critical
parts should be replaced with the manufacturer’s
specified parts to prevent electric shock, fire or other
hazard.
marked on the schematic diagram and the
replacement parts list. It is essential that these critical
parts should be replaced with the manufacturer’s
specified parts to prevent electric shock, fire or other
hazard.
• Do not modify original design without obtaining written
permission from manufacturer or you will void the
original parts and labor guarantee.
original parts and labor guarantee.
• If you want to replace with the new backlight (CCFL)
or inverter circuit, must disconnect the AC adapter
because high voltage appears at inverter circuit
about 650Vrms.
because high voltage appears at inverter circuit
about 650Vrms.
TAKE CARE DURING HANDLING THE LCD MODULE WITH
BACKLIGHT UNIT.
• Handle with care wires or connectors of the inverter
circuit. If the wires are pressed cause short and
may burn or take fire.
may burn or take fire.
• Must mount the module using mounting holes arranged
in four corners.
• Do not press on the panel, edge of the frame strongly or
electric shock as this will result in damage to the
screen.
screen.
Leakage Current Hot Check Circuit
• Do not scratch or press on the panel with any sharp
objects, such as pencil or pen as this may result in
damage to the panel.
damage to the panel.
• Protect the module from the ESD as it may damage the
electronic circuit (C-MOS).
• Make certain that treatment person’s bodies are
grounded through wrist band.
• Do not leave the module in high temperature and in
areas of high humidity for a long time.
• The module not is exposed to the direct sunlight.
• Avoid contact with water as it may a short circuit within
the module.
• If the surface of panel becomes dirty, please wipe it off
with a soft material. (Cleaning with a dirty or rough cloth
may damage the panel.)
may damage the panel.)
SDM-S75A,D,E,F/ SDM-S95A,AR,D,DR,E,ER,F,FR (E)
3
SDM-S75A,D,E,F/ SDM-S95A,AR,D,DR,E,ER,F,FR (E)
4
SPECIFICATIONS
1. LCD CHARACTERISTICS
Type
: TFT Color LCD Module
Active Display Area : 17 inch- S75A/D/E/F
: 19 inch- S95A/D/E/F
Pixel Pitch : 0.264 (H) x 0.264 (V) S75A/D/E/F
: 0.294 (H) x 0.294 (V) S95A/D/E/F
Size
:
358.5(H)
x
296.5(V) x 17.0(D)
S75A/D/E/F
: 404.2(H) x 332(V) x 20.0(D)
S95A/D/E/F
Color Depth : 16.2M Colors- S75A/D/E/F
: 16.7M Colors- S95A/D/E/F
Electrical Interface : LVDS
Surface Treatment : Haze 25%, Hard-coating (3H)
Operating Mode
Surface Treatment : Haze 25%, Hard-coating (3H)
Operating Mode
: Normally White
Backlight Unit
: 4-CCFL
2. OPTICAL CHARACTERISTICS
2-1. Viewing Angle by Contrast Ratio > 10
SDM-S75A/D/E/F-LPL TN
SDM-S75A/D/E/F-LPL TN
Left:+60°min., +70°(Typ), Right:+60° min.,+70°(Typ)
Top:+45° min.,+60°(Typ), Bottom:+50°min.,+60°(Typ)
Top:+45° min.,+60°(Typ), Bottom:+50°min.,+60°(Typ)
SDM-S75A/D/E/F-AUO
Left:+60° min.,+70°(Typ), Right:+60° min.,+70°(Typ)
Top:+60° min.,+70°(Typ), Bottom:+50°min.,+60°(Typ)
Top:+60° min.,+70°(Typ), Bottom:+50°min.,+60°(Typ)
SDM-S95A/D/F
Left:+85°min., Right:+85° min.
Top:+85°min., Bottom:+85° min.
Top:+85°min., Bottom:+85° min.
SDM-S95E
Left:+60°min., Right:+60°min.
Top:+85°min., Bottom:+85°min.
Top:+85°min., Bottom:+85°min.
2-2. Luminance:
300(Typ)-SDM-S75A/D/E/F
250(Typ)-SDM-S95A/D/E/F
250(Typ)-SDM-S95A/D/E/F
2-3. Contrast Ratio:
450:1(Typ)-SDM-S75A/D/E/F
700:1(Typ)-SDM-S95A/D/E/F
3. SIGNAL (Refer to the Timing Chart)
3-1. Sync Signal
Type : Separate Sync, Composite Sync
SOG (Sync On Green), Digital
SOG (Sync On Green), Digital
3-2. Video Input Signal
1) Type: R, G, B Analog
2) Voltage Level: 0~0.71 V
2) Voltage Level: 0~0.71 V
a) Color 0, 0: 0 Vp-p
b) Color 7, 0: 0.467 Vp-p
c) Color 15, 0: 0.714 Vp-p
b) Color 7, 0: 0.467 Vp-p
c) Color 15, 0: 0.714 Vp-p
3) Input Impedance : 75
Ω
3-3. Operating Frequency
Analog Digital
Analog Digital
Horizontal: 28 ~ 80kHz 28 ~ 64kHz
Vertical: 48 ~ 75Hz 60Hz
Vertical: 48 ~ 75Hz 60Hz
Dot Clock: < 135MHz < 108MHz
4. Max. Resolution
4. Max. Resolution
Analog: 1280 x 1024 /75Hz
Digital: 1280 x 1024 /60Hz
Digital: 1280 x 1024 /60Hz
5. POWER SUPPLY
5-1. Power: AC 100~240V, 50/60Hz, 1.0A
5-2. Power Consumption
5-2. Power Consumption
6. ENVIRONMENT
6-1. Operating Temperature:
5°C~35°C (41°F~95°F)
6-2. Relative Humidity:
10%~80% (Non-condensing)
7. DIMENSIONS (with TILT/SWIVEL)
SDM-S75A/D
Width: 369 mm (14.53'')
Depth: 225 mm (8.86'')
Height: 369 mm (14.53'')
Depth: 225 mm (8.86'')
Height: 369 mm (14.53'')
SDM-S75E/F
Width: 369 mm (14.53'')
Depth: 253 mm (9.96'')
Height: 393.5 mm ~ 503.5 mm (15.49'' ~ 19.82'')
Depth: 253 mm (9.96'')
Height: 393.5 mm ~ 503.5 mm (15.49'' ~ 19.82'')
SDM-S95A/D
Width: 414 mm (16.30'')
Depth: 277.5 mm (10.93'')
Height: 439.5 mm (17.30'')
Depth: 277.5 mm (10.93'')
Height: 439.5 mm (17.30'')
SDM-S95E/F
Width: 414 mm (16.30'')
Depth: 277.5 mm (10.93'')
Height: 409.5 mm ~ 519.5 mm (16.12'' ~ 20.45'')
Depth: 277.5 mm (10.93'')
Height: 409.5 mm ~ 519.5 mm (16.12'' ~ 20.45'')
8. WEIGHT (with TILT/SWIVEL)
SDM-S75A/D
Net. Weight: 6.30 kg (13.89 lbs)
Gross Weight: 8.30 kg (18.30 lbs)
Gross Weight: 8.30 kg (18.30 lbs)
SDM-S75E/F
Net. Weight: 7.40 kg (16.32 lbs)
Gross Weight: 9.90 kg (21.83 lbs)
Gross Weight: 9.90 kg (21.83 lbs)
SDM-S95A/D
Net. Weight: 8.60 kg (18.96 lbs)
Gross Weight: 11.50 kg (25.36 lbs)
Gross Weight: 11.50 kg (25.36 lbs)