DOWNLOAD Sony SDM-S205F / SDM-S205K Service Manual ↓ Size: 422.75 KB | Pages: 16 in PDF or view online for FREE

Model
SDM-S205F SDM-S205K
Pages
16
Size
422.75 KB
Type
PDF
Document
Service Manual
Brand
Device
Monitor
File
sdm-s205f-sdm-s205k.pdf
Date

Sony SDM-S205F / SDM-S205K Service Manual ▷ View online

 
 
SDM-S205F
: U/C, AEP
 
SDM-S205K
: U/C, AEP
 
 
Service Manual 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
TFT LCD COLOR COMPUTER DISPLAY 
 
CONTENTS 
 
 
 
 
 
 
Page 
PRECAUTIONS 
   3 
 
SPECIFICATIONS   4 
 
TIMING 
CHART 
   5, 
 
EDID data (Analog) 
 
 
 
EDID data (Digital) 
 
 
 
OPERATING INSTRUCTIONS 
 
9, 10 
 
SERVICE 
MODE 
   11 
 
WIRING 
DIAGRAM 
 
  12 
 
DISASSEMBLY 
   13 
 
ADJUSTMENT 
   14 
 
SERIAL NO. LIST  
                        15 
 
EXPLODED 
VIEW   15 
 
REPLACEMENT PARTS LIST 
 
16 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
                                                          SDM-S205F, 205K (E)
 
- 2  -
 
 
PRECAUTION
 
WARNING FOR THE SAFETY-RELATED COMPONENT. 
• There are some special components used in LCD 
monitor that are important for safety. These parts are 
marked on the schematic diagram and the 
replacement parts list. 
It is essential that these critical 
parts should be replaced with the manufacturer’s 
specified parts to prevent electric shock, fire or other 
hazard. 
 
• Do not modify original design without obtaining written 
permission from manufacturer or you will void the 
original parts and labor guarantee. 
 
TAKE CARE DURING HANDLING THE LCD MODULE WITH 
BACKLIGHT UNIT. 
 
• Must mount the module using mounting holes arranged 
in four corners. 
 
• Do not press on the panel, edge of the frame strongly or 
electric shock as this will result in damage to the 
screen. 
 
• Do not scratch or press on the panel with any sharp 
objects, such as pencil or pen as this may result in 
damage to the panel. 
 
• Protect the module from the ESD as it may damage the 
electronic circuit (C-MOS). 
 
• Make certain that treatment person’s bodies are 
grounded through wrist band. 
 
• Do not leave the module in high temperature and in 
areas of high humidity for a long time. 
 
• The module not is exposed to the direct sunlight. 
 
• Avoid contact with water as it may a short circuit within 
the module. 
 
• If the surface of panel becomes dirty, please wipe it off 
with a soft material. (Cleaning with a dirty or rough cloth 
may damage the panel.)   
       
 
 
 
 
     
 
 
• If you want to replace with the new backlight (CCFL) 
or inverter circuit, must disconnect the AC adapter 
because high voltage appears at inverter circuit 
about 650Vrms. 
         
• Handle with care wires or connectors of the inverter 
circuit. If the wires are pressed cause short and 
may burn or take fire. 
 
 
Leakage Current Hot Check Circuit 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
                                                          SDM-S205F, 205K (E)
 
- 3  -
SPECIFICATIONS 
 
1. LCD CHARACTERISTICS 
Type 
 
: TFT Color LCD Module 
Size  
20.1inch 
Pixel Pitch 
: 0.255 (H) x 0.255 (V)   
Color Depth 
: 16.77 M Colors / 8 Bit 
Electrical Interface   : LVDS 
Surface Treatment   : Hard-coating (3H), Anti-glare 
Treatment of the front polarizer 
Operating Mode 
    : Normally Black 
Backlight Unit 
    : Top / Bottom edge side 6-CCFL 
 
 
  (Cold Cathode Fluorescent Lamp) 
 
 
2. OPTICAL CHARACTERISTICS 
 
2-1. Viewing Angle by Contrast Ratio > 10 
Left: -85° min. 
Right: +85° min 
Top: +85° min.  Bottom: -85° min. 
 
2-2. Luminance: 250 (Typ.) 
 
2-3. Contrast Ratio: 600 (Typ.) 
 
 
 
3. SIGNAL (Refer to the Timing Chart) 
 
3-1. Sync Signal 
• Type : Separate Sync, 
SOG (Sync On Green) 
Composite Sync 
 
3-2. Video Input Signal 
1) Type : R, G, B Analog 
2) Voltage Level: 0~0.71 V 
a) Color 0, 0: 0 Vp-p 
b) Color 7, 0: 0.467 Vp-p 
c) Color 15, 0: 0.714 Vp-p 
3) Input Impedance: 75 Ω
 
 
3-3. Operating Frequency 
Analog (SXGA) 
(UXGA) 
Horizontal: 28 ~ 92 kHz  28 ~ 75kHz 
Vertical: 48 ~ 85Hz 
60Hz 
Dot clock: <160 MHz 
Dot clock: <170MHz 
 
Digital 
Horizontal : 28 ~ 75kHz 
Vertical: 60Hz   
Dot clock :< 165MHz 
 
 
 
4. Max. Resolution 
Analog / Digital: 1600 x 1200 / 60Hz 
 
 
 
 
 
 
 
 
 
5. POWER SUPPLY 
 
5-1. Power: AC 100-240V~, 50 / 60 Hz, 1.2A 
 
5-2. Power Consumption 
 
 
 
 
 
 
 
 
 
 
6. ENVIRONMENT 
 
6-1. Operating Temperature:5°C ~ 35°C 
 
6-2. Relative Humidity: 10%~80% 
(Non-condensing) 
 
 
 
7. DIMENSIONS (with TILT/SWIVEL) 
Width: 441.5 mm (17.38'') 
Depth: 277.5 mm (10.93'') 
Height: 421~ 551 mm (16.57 ~ 21.69'') 
 
 
 
8. WEIGHT (with TILT/SWIVEL) 
Net. Weight: 9.90 kg (21.83 lbs) 
Gross Weight: 12.89 kg (28.42 lbs) 
                                                          SDM-S205F, 205K (E)
 
4
Page of 16
Display

Sony SDM-S205F / SDM-S205K Service Manual ▷ Download

  • DOWNLOAD Sony SDM-S205F / SDM-S205K Service Manual ↓ Size: 422.75 KB | Pages: 16 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony SDM-S205F / SDM-S205K in PDF for free, which will help you to disassemble, recover, fix and repair Sony SDM-S205F / SDM-S205K Monitor. Information contained in Sony SDM-S205F / SDM-S205K Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.