DOWNLOAD Sony SDM-S204 Service Manual ↓ Size: 1.02 MB | Pages: 14 in PDF or view online for FREE

Model
SDM-S204
Pages
14
Size
1.02 MB
Type
PDF
Document
Service Manual
Brand
Device
Monitor
File
sdm-s204.pdf
Date

Sony SDM-S204 Service Manual ▷ View online

SDM-S204
US Model
Canadian Model
AEP Model
J Model
TFT LCD COLOR COMPUTER DISPLAY
SERVICE MANUAL
 There are some different LCD panels are used in the model SDM-S204.
 Therefore the repair parts are also different.
 Please confirm the serial number before repairing,
SDM-S204
SDM-S204
SDM-S204
SDM-S204
MODEL NAME
Color
Dest.
SER NO.(Fujitsu)
SER NO.(LPL)
SDM-S204
GRAY
AEP
9,300,001-9,400,000
9,400,001-9,500,000
SDM-S204
BLACK
U/C
9,200,001-9,250,000
9,250,001-9,300,000
SDM-S204
BLACK
AEP
9,500,001 - 9,600,000
-
SDM-S204
BLACK
J
9,750,001-9,775,000
9,775,001-9,800,000
-  1 -
1. LCD CHARACTERISTICS
Type
: TFT Color LCD Module
Size
: 20.1 inch
Pixel Pitch
: 0.255 (H) x 0.255 (V)
Color Depth
: 16.7M colors
Electrical Interface
: LVDS
Surface Treatment 
: Anti, Hard-coating(2H) 
Operating Mode
: Normally Black
Backlight Unit     
: Top/Bottom edge side 6-CCFL
(Cold Cathode Fluorescent Lamp)
2. OPTICAL CHARACTERISTICS
2-1. Viewing Angle by Contrast Ratio  
10
Left : -85° min.   Right    : +85° min.
Top :+85° min.   Bottom : -85°min.
2-2. Luminance
: 200(min), 250(Typ.)
2-3. Contrast Ratio
: 400(min), 600(Typ.) 
3. SIGNAL (Refer to the Timing Chart)
3-1. Sync Signal
• Type
: Separate Sync,
SOG (Sync On Green)
Composite Sync
3-2. Video Input Signal
1) Type
: R, G, B Analog
2) Voltage Level : 0 ~ 0.7 V
3) Input Impedance : 75 
3-3. Operating Frequency
Analog(SXGA)
(UXGA)
Horizontal
: 28 ~ 92kHz
28 ~ 75kHz
Vertical
: 48 ~ 85Hz   
60Hz                                
Dot clock : <165MHz Dot clock:<165MHz
Digital
Horizontal
: 28 ~ 75kHz
Vertical : 60Hz              Dot clock:<165MHz   
4
Max. Resolution
Analog/Digital
: 1600 x 1200 / 60Hz
5. POWER SUPPLY
5-1. Power : AC 100-240V~, 50/60Hz , 1.2A
5-2. Power Consumption
6. ENVIRONMENT
6-1. Operating Temperature: 5°C~35°C (41°F~95°F)
6-2. Relative Humidity
: 10%~80%
(Non-condensing)
6-3. MTBF
: 50,000 Hours(Min)
7. DIMENSIONS (with TILT/SWIVEL)
Width
: 440.5 mm (17.34'')
Depth
: 234 mm (9.21'')
Height
: 447.5 mm (17.61'')
8. WEIGHT (with TILT/SWIVEL)
Net. Weight
: 7.5kg (16.87 lbs)
Gross Weight
: 10.9 kg (24.03 lbs)
CONTENTS
SPECIFICATIONS
- 2 -
SPECIFICATIONS ................................................... 2
PRECAUTIONS ....................................................... 3
TIMING CHART ....................................................... 4
OPERATING INSTRUCTIONS .................................6
WIRING DIAGRAM  ................................................. 7
DISASSEMBLY ....................................................... 8
BLOCK DIAGRAM .................................................. 9
ADJUSTMENT ...................................................... 10
EXPLODED VIEW...................................................11 
EXPLODED VIEW PARTS LIST ............................12 
MODE
POWER ON (NORMAL)
STAND BY
SUSPEND
DPMS OFF
POWER S/W OFF
H/V SYNC
ON/ON
OFF/ON
ON/OFF
OFF/OFF
-
POWER CONSUMPTION
less than 60 W
less than  2.7W
less than  2.7W
LED COLOR
GREEN
AMBER
RED
VIDEO
ACTIVE
OFF
OFF
OFF
-
(100/50Hz, 240V/60Hz)
- 3 -
PRECAUTION
WARNING FOR THE SAFETY-RELATED COMPONENT.
• There are some special components used in LCD
monitor that are important for safety. These parts are
marked   on the schematic diagram and the
replacement parts list. 
It is essential that these critical
parts should be replaced with the manufacturer’s
specified parts to prevent electric shock, fire or other
hazard.
• Do not modify original design without obtaining written
permission from manufacturer or you will void the
original parts and labor guarantee.
TAKE CARE DURING HANDLING THE LCD MODULE
WITH BACKLIGHT UNIT.
• Must mount the module using mounting holes arranged
in four corners.
• Do not press on the panel, edge of the frame strongly
or electric shock as this will result in damage to the
screen.
• Do not scratch or press on the panel with any sharp
objects, such as pencil or pen as this may result in
damage to the panel.
• Protect the module from the ESD as it may damage the
electronic circuit (C-MOS).
• Make certain that treatment person’s body are
grounded through wrist band.
• Do not leave the module in high temperature and in
areas of high humidity for a long time.
• The module not be exposed to the direct sunlight.
• Avoid contact with water as it may a short circuit within
the module.
• If the surface of panel become dirty, please wipe it off
with a softmaterial. (Cleaning with a dirty or rough cloth
may damage the panel.)
WARNING
BE CAREFUL ELECTRIC SHOCK ! 
• If you want to replace with the new backlight (CCFL) or
inverter circuit, must disconnect the AC adapter
because high voltage appears at inverter circuit about
650Vrms.
• Handle with care wires or connectors of the inverter
circuit. If the wires are pressed cause short and may
burn or take fire.
CAUTION
Please use only a plastic screwdriver to protect yourself
from shock hazard during service operation.
Page of 14
Display

Sony SDM-S204 Service Manual ▷ Download

  • DOWNLOAD Sony SDM-S204 Service Manual ↓ Size: 1.02 MB | Pages: 14 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony SDM-S204 in PDF for free, which will help you to disassemble, recover, fix and repair Sony SDM-S204 Monitor. Information contained in Sony SDM-S204 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.