DOWNLOAD Sony CPD-E100 / CPD-E100E / CPD-E100P Service Manual ↓ Size: 4.16 MB | Pages: 40 in PDF or view online for FREE

1-1

4

• Use the supplied power cord. If you use a different power cord, 

be sure that it is compatible with your local power supply.
For the customers in the U.S.A.
If you do not use the appropriate cord, this monitor will not 
conform to mandatory FCC standards.

• Before disconnecting the power cord, wait at least 30 seconds 

after turning off the power to allow the static electricity on the 
screen’s surface to discharge.

• After the power is turned on, the screen is demagnetized 

(degaussed) for about 5 seconds. This generates a strong 
magnetic field around the screen which may affect data stored 
on magnetic tapes and disks placed near the monitor. Be sure to 
keep magnetic recording equipment, tapes, and disks away 
from the monitor.

Do not install the monitor in the following places:
• on surfaces (rugs, blankets, etc.) or near materials (curtains, 

draperies, etc.) that may block the ventilation holes

• near heat sources such as radiators or air ducts, or in a place 

subject to direct sunlight

• in a place subject to severe temperature changes
• in a place subject to mechanical vibration or shock
• on an unstable surface
• near equipment which generates magnetism, such as a 

transformer or high voltage power lines

• near or on an electrically charged metal surface

• Clean the screen with a soft cloth. If you use a glass cleaning 

liquid, do not use any type of cleaner containing an anti-static 
solution or similar additive as this may scratch the screen’s 
coating.

• Do not rub, touch, or tap the surface of the screen with sharp or 

abrasive items such as a ballpoint pen or screwdriver. This type 
of contact may result in a scratched picture tube.

• Clean the cabinet, panel and controls with a soft cloth lightly 

moistened with a mild detergent solution. Do not use any type 
of abrasive pad, scouring powder or solvent, such as alcohol or 
benzene.

When you transport this monitor for repair or shipment, use the 
original carton and packing materials.

This monitor can be adjusted within the angles shown below. To 
find the center of the monitor’s turning radius, align the center of 
the monitor’s screen with the centering dots on the stand.
Hold the monitor at the bottom with both hands when you turn it 
horizontally or vertically. Be careful not to pinch your fingers at 
the back of the monitor when you tilt the monitor up vertically.

The equipment should be installed near an easily accessible 
outlet.

Example of plug types

for 100 to 120 V AC

for 200 to 240 V AC

90˚

5˚

90˚

15˚

Centering dots

5

See the pages in parentheses for further details.

1

This button resets the adjustments to the factory settings.

2

The control button is used to display the menu and make 
adjustments to the monitor, including brightness and contrast 
adjustments.

3 1

This button turns the monitor on and off. The power indicator 
lights up in green when the monitor is turned on, and either 
flashes in green and orange, or lights up in orange when the 
monitor is in power saving mode.

4

This connector provides AC power to the monitor.

5

This connector inputs RGB video signals (0.700 Vp-p, 
positive) and sync signals.

* DDC (Display Data Channel) is a standard of VESA.

1

Red

2

Green
(Sync on Green)

3

Blue

4

ID (Ground)

5

DDC Ground*

6

Red Ground

7

Green Ground

8

Blue Ground

9

–

10

Ground

11

ID (Ground)

12

Bi-Directional Data (SDA)*

13

H. Sync

14

V. Sync

15

Data Clock (SCL)*

1 2

3 4 5

8

7

6

11 12 13 14 15

10

9

1-2

6

Before using your monitor, check that the following accessories 
are included in your carton:
• Power cord (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)

Turn off the monitor and computer before connecting.

Do not touch the pins of the video cable connector as this might bend the 
pins.

x

x

With the monitor and computer switched off, first connect the 
power cord to the monitor, then connect it to a power outlet.

IBM PC/AT or 
compatible computer

to video output

You will need a Macintosh adapter (not supplied).

Macintosh adapter (not supplied)

to video output

Macintosh or 
compatible computer

to AC IN

to a power outlet

power cord (supplied)

7

First turn on the monitor, then turn on the computer.

The installation of your monitor is complete.
If necessary, use the monitor’s controls to adjust the picture.

• Check that the monitor is correctly connected to the computer.
• If NO INPUT SIGNAL appears on the screen, confirm that 

your computer’s graphic board is completely seated in the 
correct bus slot. 

• If you are replacing an old monitor with this model and OUT 

OF SCAN RANGE appears on the screen, reconnect the old 
monitor. Then adjust the computer’s graphic board so that the 
horizontal frequency is between 30 – 70 kHz, and the vertical 
frequency is between 48 – 120 Hz.

For more information about the on-screen messages, see “Trouble 
symptoms and remedies” on page 14.

To maximize the potential of your monitor, install the new model 
information file from the supplied Windows Monitor Information Disk 
onto your PC.
This monitor complies with the “VESA DDC” Plug & Play standard. If 
your PC/graphics board complies with DDC, select “Plug & Play Monitor 
(VESA DDC)” or this monitor’s model name as the monitor type in the 
“Control Panel” of Windows 95/98. If your PC/graphics board has 
difficulty communicating with this monitor, load the Windows Monitor 
Information Disk and select this monitor’s model name as the monitor 
type.

Monitor setup in Windows NT4.0 is different from Windows 95/98 and 
does not involve the selection of monitor type. Refer to the Windows 
NT4.0 instruction manual for further details on adjusting the resolution, 
refresh rate, and number of colors.

Adjust the monitor’s resolution and color number by referring to your 
computer’s instruction manual. The color number may vary according to 
your computer or video board. The color palette setting and the actual 
number of colors are as follows:
• High Color (16 bit) 

t 65,536 colors

• True Color (24 bit) 

t about 16.77 million colors

In true color mode (24 bit), speed may be slower.

English, French, German, Italian, Spanish, Russian and Japanese 
versions of the on-screen menus are available. The default setting 
is English.

See page 9 for more information on using the control button.

m

M

m

M

<

,

• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ITALIANO: Italian
• ESPAÑOL: Spanish
•

: Russian

•

: Japanese 

Press the center of the control button once to return to the main MENU, 
and press again selecting EXIT to return to normal viewing. If no buttons 
are pressed, the menu closes automatically after about 30 seconds.

Press the RESET button while the 

 (LANGUAGE) menu is displayed 

on the screen.

EX I T
H - S I Z E / CENT ER
V - S I Z E / CENT ER
P I N / P I N BA L ANCE
KEY / KEY BA L ANCE
ROT A T I ON
ZOOM
COLOR

SE L ECT

L ANGUAGE / I NFORMA T

N

O

I

DEGAUSS / CANCE L MO

E

R

I

MENU

ENGL I SH

FRANÇA I S

DEUT SCH

I T A L I ANO

ESPAÑOL

SE L ECT

EX I T

LANGUAGE / I NFORMAT I ON

1-3

8

You can make numerous adjustments to your monitor using the 
on-screen menu.

Press the center of the control button to display the main MENU 
on your screen. See page 9 for more information on using the 
control button.

Use the control button to select one of the following menus.

1

Select EXIT to close the menu.

2

Select the H-SIZE/CENTER 
menu to adjust the picture’s 
horizontal size and centering. 

3

Select the V-SIZE/CENTER 
menu to adjust the picture’s 
vertical size and centering. 

4

Select the PIN/PIN BALANCE 
menu to adjust the curvature 
picture’s sides.

5

Select the KEY/KEY BALANCE 
menu to adjust the angle of the 
picture’s sides. 

6

Select the ROTATION menu to 
adjust the picture’s rotation.

7

Select the ZOOM menu to enlarge 
or reduce the picture.

EX I T
H - S I Z E / CENT ER
V - S I Z E / CENT ER
P I N / P I N BA L ANCE
KEY / KEY BA L ANCE
ROT A T I ON
ZOOM
COLOR

SE L ECT

L ANGUAGE / I NFORMA T

N

O

I

DEGAUSS / CANCE L MO

E

R

I

MENU

H - S I Z E

2 6

SE L ECT

EX I T

H - S I ZE / CENTER

V - S I Z E

2 6

SE L ECT

EX I T

V - S I ZE / CENTER

P I N

2 6

SE L ECT

EX I T

P I N / P I N BALANCE

K E Y

2 6

SE L ECT

EX I T

KEY / KEY BALANCE

RO T A T I ON

2 6

EX I T

ROTAT I ON

Z OOM

2 6

EX I T

ZOOM

8

Select the COLOR menu to adjust 
the picture’s color temperature. 
You can use this to match the 
monitor’s colors to a printed 
picture’s colors.

9

Select the LANGUAGE/
INFORMATION menu to choose 
the on-screen menu’s language 
and display this monitor’s 
information box. 

q;

Select the DEGAUSS/CANCEL 
MOIRE menu to degauss the 
screen and adjust the moire 
cancellation level.

K

K

K

R

5 0

G

5 0

B

5 0

SE L ECT

EX I T

COLOR

5000

6500

9300

USER

ENGL I SH

FRANÇA I S

DEUT SCH

I T A L I ANO

ESPAÑOL

SE L ECT

EX I T

LANGUAGE / I NFORMAT I ON

D EGA U S S

ON

SE L ECT

EX I T

DEGAUSS / CANCEL MO I RE

9

x

Press the center of the control button to display the main 
MENU on your screen.

Highlight the desired menu by moving the control button 
towards the rear to go up (

M), towards the front to go down 

(

m), and left (<) or right (,) to move sideways.

Move the control button left (

<) or right (,) to make the 

adjustment.

Press the center of the control button once to return to the 
main MENU, and press again selecting EXIT to return to 
normal viewing. If no buttons are pressed, the menu closes 
automatically after about 30 seconds.

x

Press the RESET button. See page 12 for more information on 
resetting the adjustments.

Brightness and contrast adjustments are made using a separate 
BRIGHTNESS/CONTRAST menu.
These settings are stored in memory for all input signals.

The BRIGHTNESS/CONTRAST menu appears on the 
screen.

The horizontal and vertical frequencies of the current input 
signal are displayed in the BRIGHTNESS/CONTRAST 
menu. If the signal matches one of this monitor’s factory 
preset modes, the resolution is also displayed.

m

M

<

,

6

The menu automatically disappears after about 3 seconds.

2 6

2 6

6 8 . 7 k H z / 8 5 . 0 H z

1 0 2 4 X 7 6 8

BR I GHTNESS / CONTRAST

the resolution 
of the current 
input signal

the horizontal 
and vertical 
frequencies 
of the current 
input signal

1-4

10

These settings are stored in memory for the current input signal.

The main MENU appears on the screen.

m

M

The H-SIZE/CENTER menu appears on the screen.

m

M

<

,

These settings are stored in memory for the current input signal.

The main MENU appears on the screen.

m

M

The V-SIZE/CENTER menu appears on the screen.

m

M

<

,

These settings are stored in memory for the current input signal.

The main MENU appears on the screen.

m

M

The PIN/PIN BALANCE menu appears on the screen.

m

M

<

,

These settings are stored in memory for the current input signal.

The main MENU appears on the screen.

m

M

The KEY/KEY BALANCE menu appears on the screen.

m

M

<

,

 H-SIZE

adjust the horizontal size

 H-CENTER

adjust the horizontal centering

 V-SIZE

adjust the vertical size

 V-CENTER

adjust the vertical centering

 PIN

expand or contract the picture sides

 PIN BALANCE

shift the picture sides to the left or right

KEY

adjust the picture width at the top of 
the screen

KEY BALANCE

shift the picture to the left or right at 
the top of the screen

11

This setting is stored in memory for all input signals.

The main MENU appears on the screen.

m

M

The ROTATION menu appears on the screen.

<

,

This setting is stored in memory for the current input signal.

The main MENU appears on the screen.

m

M

The ZOOM menu appears on the screen.

<

,

Adjustment stops when either the horizontal or vertical size reaches its 
maximum or minimum value.

The COLOR settings allow you to adjust the picture’s color 
temperature by changing the color level of the white color field. 
Colors appear reddish if the temperature is low, and bluish if the 
temperature is high. This adjustment is useful for matching the 
monitor’s colors to a printed picture’s colors.
This setting is stored in memory for all input signals.

The main MENU appears on the screen.

m

M

The COLOR menu appears on the screen.

</,

The preset color temperatures are 5000K, 6500K, and 9300K. 
Since the default setting is 9300K, the whites will change 
from a bluish hue to a reddish hue as the temperature is 
lowered to 6500K and 5000K.

First move the control button 

</, to select USER. Then 

move the control button 

m/M to select R (red), G (green), or 

B (blue) and move 

</, to make the adjustment.

If you fine tune the color temperature, the new color settings 
are stored in memory and recalled whenever you select 
USER.

K

K

K

R

5 0

G

5 0

B

5 0

SE L ECT

EX I T

COLOR

5000

6500

9300

USER