Sony DVP-S350 Service Manual ▷ View online
– 5 –
3.
HOW TO SERVICE MB-86 BOARD
1) Remove the case from the set. (Refer to 2-1)
2) Remove the mechanism deck. (Refer to 2-2)
3) Remove the MB-86 board. (Refer to 2-3)
4) Set the CK-MD board as shown in Fig. 2.
2) Remove the mechanism deck. (Refer to 2-2)
3) Remove the MB-86 board. (Refer to 2-3)
4) Set the CK-MD board as shown in Fig. 2.
Fig. 2
5) Set the MB-86 board as shown in Fig. 3.
Fig. 3
2.
DISC REMOVAL PROCEDURE
(at POWER OFF)
(at POWER OFF)
1) Insert a tapering driver into the aperture of the unit bottom,
and move the lever of chuck cam in the direction of the arrow
A. (See Fig. 1)
A. (See Fig. 1)
2) Draw out the tray in the direction of the arrow B, and remove
a disc. (See Fig. 1)
Fig. 1
5
CK-MD board
4
Claw
1
Flexible board
(CN005)
(CN005)
3
Flexible board
(CN002)
(CN002)
2
Flexible board
(CN001)
(CN001)
1
MB-86 board
3
Two ground point
screws
screws
2
Stand
B
A
Lever of chuck cam
Aperture
Tray
– 6 –
6) Set the CK-MB board as shown in Fig. 4.
Fig. 4
7) Set the CK-AI board as shown in Fig. 5.
Fig. 5
8) Set the mechanism deck as shown in Fig. 6.
Fig. 6
3
CK-MB board
1
MB-86 board
2
Two connectors
(CN101, 102)
(CN101, 102)
CK-MB board
2
Claw
1
Two connectors
(CN101, 102)
(CN101, 102)
3
CK-AI board
4
Connector
(CN104)
(CN104)
5
Connector
(CN103)
(CN103)
6
Flexible board
(CN103)
(CN103)
7
Flexible board
(CN104)
(CN104)
MB-86 board
Mechanism deck
1-1
SECTION 1
GENERAL
This section is extracted from in-
struction manual (3-062-657-11).
struction manual (3-062-657-11).
DVP-S350
1-2
Click on the first or last page to see other DVP-S350 service manuals if exist.