Sony DVP-S315 Service Manual ▷ View online
6-16
6-6-10. EEPROM data screen display
EEPROM data
CD
DVD
ID No.
00
SL
L0
L1
Focus Offset
80
80
80
80
Focus Gain
30
18
30
30
TRK Offset
80
80
80
80
TRK. CONT.
??
??
??
??
TRK Gain
30
30
30
30
Tilt Offset
80
80
80
80
Pullin Level
9e
9f
ab
ab
EQ. Boost
??
??
??
??
L.F.O
??
??
??
??
SD. ?? HY. ??
Figure 20
This screen displays various set values including adjusted results
stored in the EEPROM.
stored in the EEPROM.
ID No.
: Nothing is displayed (00 is displayed)
Focus Offset : 00 – FF 80 center (DVD_SL)
Focus Gain
Focus Gain
: 00 – 7F 20 center (DVD_SL)
TRK. Offset : 00 – FF 80 center (DVD_SL)
TRK. CONT. : Refer to Manual adjust 1 Tracking offset 2 and
TRK. CONT. : Refer to Manual adjust 1 Tracking offset 2 and
Tracking gain.
TRK. Gain
: 00 – 7F 20 center (DVD_SL)
Tilt Offset
: 00 – FF 80 center (DVD_SL)
Pullin Level : 80 – FF D0 center (DVD_SL)
EQ. Boost
EQ. Boost
: Fixed according to the disc type.
L.F.O
: Only lower 5 bits are effective.
SD.
: About 50 – E0
HY.
: About 60 – A0
6-7. Other Operation
For manual operation of the drive, the following operations are
available, besides the operations given on the menu screen. (Com-
mon to front panel and remote commander)
available, besides the operations given on the menu screen. (Com-
mon to front panel and remote commander)
Eject/Loading
OPEN/CLOSE
Stop+Ejection, and Loading
button
Clear
CLEAR button
Movement throughout the
menu
menu
Stop
STOP button
Servo stop
Retrun
RETURN button
Return to drive manual op-
eration
eration
Set up
SET UP button
STOP, then return to test
mode menu
mode menu
Cursol key
→↑
keys
Increase manually adjusted
value
value
Cursol key
←
keys
Decrease manually adjusted
value
value
Power
POWER button
Power OFF
6-17
EMG Hist
Page 4
DVD 000000 Hour
7
00 00 00 00 00 00
00 00 00 00 00 00
8
00 00 00 00 00 00
00 00 00 00 00 00
Page UP:
↑
Exit: Return
Figure 24
The following hidden commands are available. Data clear can be
confirmed from the fact that the screen display changes.
confirmed from the fact that the screen display changes.
Clearing laser ON hours
Press [DISPLAY] and [CLEAR] keys on the standard commander
in this order.
in this order.
Clearing emergency history
Press [TITLE] and [CLEAR] keys on the standard commander in
this order.
After repair is finished, always clear emergency history data.
this order.
After repair is finished, always clear emergency history data.
Clearing Syscon preset
Press [DVD MENU] and [CLEAR] keys on the standard com-
mander in this order.
mander in this order.
For EMG code, Mech mode, and Disc information of history dis-
play, see “Emergency code list”, “Mech mode list”, and “Disc type
list”.
play, see “Emergency code list”, “Mech mode list”, and “Disc type
list”.
6-8. Emergency History
With the initial menu displayed, press [4] key on the standard com-
mander, and the information on emergency history of Drvcon and
Syscon will be displayed. This information is given over four pages,
which can be changed over with [
mander, and the information on emergency history of Drvcon and
Syscon will be displayed. This information is given over four pages,
which can be changed over with [
↑
] and [
↓
] keys. To return to the
initial menu, press [RETURN] key.
EMG Hist
Page 1
CD 000000 Hour
1
00 00 00 00 00 00
00 00 00 00 00 00
2
00 00 00 00 00 00
00 00 00 00 00 00
Page Down:
↓
Exit: Return
Figure 21
EMG Hist
Page 2
DVD 000000 Hour
3
00 00 00 00 00 00
00 00 00 00 00 00
4
00 00 00 00 00 00
00 00 00 00 00 00
Page UP
:
↑
Page Down:
↓
Exit: Return
Figure 22
EMG Hist
Page 3
CD 000000 Hour
5
00 00 00 00 00 00
00 00 00 00 00 00
6
00 00 00 00 00 00
00 00 00 00 00 00
Page UP
:
↑
Page Down :
↓
Exit: Return
Figure 23
N Page
N CD laser ON hours
N Emergency history
N Emergency history
(latest)
N Emergency history (2)
N DVD laser ON hours
N Emergency history (3)
N Emergency history (3)
N Emergency history (4)
N Emergency history (5)
N Emergency history (6)
N Emergency history (7)
N Emergency history (8)
6-18
Etc
90:
Recovery NG
96:
Auto Sequence Time Out
97:
Auto Sequence Fail
Syscon
A0:
Stop request from drive controller was received
A1:
At the mode change command, the mode could
not be changed within specified time and the
drive stopped.
not be changed within specified time and the
drive stopped.
A2:
Retry due to supply error failed and the drive
stopped.
stopped.
A3:
Disc directory configuration and information file
are illegal and the drive stopped.
are illegal and the drive stopped.
A4:
The drive stopped as a DVD-R disc was used.
A5:
Coded data could not be decoded and the drive
stooped.
stooped.
A6:
At slow R, the destination of reverse search is
illegal and the drive stopped.
illegal and the drive stopped.
A7:
Supply error and stopped.
B0:
SYSCON error was due to supply system.
B1:
SYSCON error was due to VIDEO hung up
B2:
DMX error
B3:
At slow R, data supply time out
B4:
At slow R, wrong Navi Pack sector address
B5:
At slow R, VIDEO hung up
B6:
At slow R, Gttgt end time out
B7:
At FF/FR, data supply time out
B8:
At FF/FR, VIDEO hung up
Hicon
C0:
HICON ROM destination is wrong
C1:
HICON UART1 communication port NG
Power system
D0:
The power turned off because of power off re-
quest from drive controller.
quest from drive controller.
D1:
The mode change to Stop mode failed and the
power turned off.
power turned off.
Drvcon
E0:
DRVCON system error
E1:
DRVCON system error
2 MECHA MODE (Mecha mode list)
00:
Power ON Ready
10:
Stop
20:
Trace (data supply mode)
30:
Pause
40:
Drvcon Initialize
50:
Mecha Initialize
6
π:
Spin Up
61:
Adaptation (Tracking Offset)
62:
Adaptation (Jitter/Gain)
63:
TOC/Control Data Read
60:
Etc
70:
Spin Down
80:
Seek
90:
Error Recovery
How to see Emergency History
1 EMG CODE
2 MECHA MODE
3 DISC TYPE (Mecha Mode: 6π)
2 MECHA MODE
3 DISC TYPE (Mecha Mode: 6π)
1 EMG CODE (Emergency code list)
Digital Pass
01:
EEPROM Read NG
02:
EEPROM Write NG
03:
EEPROM Busy Time Out
04:
Emergency History Pointer NG
06:
HICON SYSCON Communication NG
07:
HICON V-sync NG
Electrical Adjustment
10:
EEPROM Check NG
16:
DSP Check NG
Mecha
20:
Home Position Time Out
21:
Sled Driver NG
26:
Tray NG
27:
Roulette NG
Tilt/Adaptation
30:
Hy Det Level NG
31:
Sled Offset Cancel NG
32:
Focus Gain NG
33:
Tracking Offset NG
34:
Tracking Gain NG
35:
Jitter NG
Focus
40:
Focus Servo Lock NG
41:
Focus Jump NG
Spindle
60:
Miss Chuck
61:
Spindle Lock Time Out
62:
Spindle Reckless
63:
CLV Lock NG
64:
CLV Lock Time Out
65:
CAV Speed NG
66:
Spindle Speed
×
1 NG
Seek System
70:
Req Address NG
71:
Req Time Code NG
72:
Req Track No. NG
73:
Seek NG
Data Relation
80:
Address Continuity NG
81:
Address Read NG
82:
TOC Read Time Out
83 – 87:
Physical Information Read Error
88:
Layer No. NG
89:
CD Text Data Read Error
1
2
3
6-19
(A)
(B)
6
6-9. Error Code
The self-diagnosis function works to prevent the player from mal-
functioning, a five-digit service number (combination of a letter
and figures) flashes on the screen and front panel display.
functioning, a five-digit service number (combination of a letter
and figures) flashes on the screen and front panel display.
1. Each user needs to manage the error. ....................... “C” code
C : 13 :
ππ
• The disc is dirty.
→
Clean the disc with a cleaning cloth.
C : 31 :
ππ
• The disc is not inserted correctly.
→
Open the disc tray and insert the disc
correctly.
MECHA MODE is shown in
ππ position.
Code
Description
00
Power ON Ready
10
Stop
20
Trace (data supply mode)
30
Pause
40
Drvcon Initialize
50
Mecha Initialize
6
π
Spin Up
61
Adaptation (Tracking Offset)
62
Adaptation (Jitter/Gain)
63
TOC/Control Data Read
60
Etc
70
Spin Down
80
Seek
90
Error Recovery
3 Disc Type (Mecha Mode: 6π)
(A)
Last result of disc type judgment.
(B)
Initial result of disc type judgment.
Disc type list
FF:
Unknown
00:
No Disc
01:
CD 12 cm
11:
CD 8 cm
02:
Single DVD 12 cm
12:
Single DVD 8 cm
03:
Dual DVD 12 cm
13:
Dual DVD 8 cm
04:
CDR 12 cm
14:
CDR 8 cm
05:
DVDR 12 cm
15:
DVDR 8 cm
Click on the first or last page to see other DVP-S315 service manuals if exist.