DOWNLOAD Sony DVP-NW50 Service Manual ↓ Size: 7.83 MB | Pages: 65 in PDF or view online for FREE

5

This section is extracted
from instruction manual.

1

2

SPEAKER (for INTERCOM/MONITOR) (page 38, 39)
Receives the sound while INTERCOM or MONITOR
is set to ON.

3 ?

/1 (POWER) (page 20, 22, 23)

Press to turn the power on/off.

4

SELECT (page 18)
Press to select an item on the front panel display, such
as menu items, settings, tracks, etc.

5

MODE
Press to jump to the Mode Menu of each function.

6

Press to return to the previous menu or to view the
current status of the disc title list or the Preset station
list.

7

 m/M (SCROLL DOWN/UP)

Press to scroll the LCD menu.
When you listen to the radio, you can adjust the
frequency by all kinds of tuning.

8

Press to return to the Home Menu.

9

MUTING (page 20, 22)
Press to mute the speaker output from the Unit, or to
cancel muting when it is set to ON.

0

Press to adjust the volume of the speaker output from
the Unit.

qa

Press to open/close the door on the Unit.

qs

MICROPHONE
Picks up the sound while INTERCOM is set to ON.

qd

N(PLAY): Press to play the selected source

X (PAUSE) : Press to pause playback

x (STOP) : Press to stop playback

./> : Locates a specific track

qf

Display (page 18)
Displays the Home Menu and the Setup Menu, etc.
You can operate the Home Menu and the Setup Menu,
etc., using any SELECT (4).

6

Before connecting each of speaker cables to the Unit, you must
connect them to the supplied speaker connector. See
“Connecting speaker cables to the speaker connector.”

8

a) SUB WOOFER/CENTER
Connects a sub woofer and a center speaker using a speaker
cable.
b) SUR L/SUR R
Connects surround speakers using speaker cables.
c) FRONT L/FRONT R
Connects front speakers using speaker cables.

0 DC IN
Connects the DC IN connector using the power supply cables
inserted to connect the AC power unit and a Unit.

You can tune in AM/FM stations using the Unit.

1

Connects the AM loop antenna to the AM terminal.
Connect a 75 ohm coaxial cable (not supplied) from an outdoor
FM antenna (not supplied).

You can connect Units to other Units or computers via a router
or a hub.

2

Connects the Units to a router or a hub using a Ethernet cable.

You can listen to the sound from external audio equipment via
the Unit.

3

Connects the OUTPUT jacks (L/R) of the audio equipment to
the LINE IN (L/R) jacks of the Unit using audio cables (not
supplied).

You can control components with the remote in a wider range
by connecting the Unit and the component to IR IN/OUT.

4

Connect IR IN of the Unit and IR OUT of a component, such as
a TV so that you can operate the Unit with the remote by
aiming it at the TV.

4

Connect IR OUT of the Unit and IR IN of a component, such as
a CD Changer, so that you can operate the DVD Changer with
the remote by aiming it at the Unit.

Select one of the connection methods shown below, according
to the input jack on your TV monitor.

5

Connects the video input of a TV or a  projector and the VIDEO
OUT jack of the Unit using a video cable.

6

Connects the S VIDEO input of a TV or a projector and the S
VIDEO OUT jack of the Unit using a S VIDEO cable.

Do not connect a VCR, etc., between your TV and the player. If you pass
the player signals via the VCR, you may not receive a clear image on a TV
screen. If your TV has only one video input jack, connect the player to this
jack.

7

1

2

3

4

5

6

7

8

9

0

RM SETUP

ANGLE

ENTER

CLEAR

SELECT

DOWN

HOME

MODE

BACK

TOP MENU

MENU

DVD

MUTING

MASTER VOL

RETURN

DISPLAY

TV VOL

TV CH

AUDIO

SUBTITLE

UP

TV

TV/VIDEO

ENTER

SETUP

DVD

8

1

RM SETUP (page 18)
Press to preset the remote code, and switch between
CIS2/CIS3.

2

Press to switch signals between TV input and Video
input for the Sony TV monitor.

3

Press to select a number, representing, for example, a
desired track of the audio source.

4

Press to select an item on the front panel display, such
as menu items, settings, tracks, etc.

5

Press to jump to Mode Menu of each function.

6

Press to return to the Home Menu on the display.

7

DOWN/UP
Press to scroll the LCD menu.
When you listen to the radio, you can adjust the
frequency by all kinds of tuning (except for Automatic
tuning).

8

 ./> (page 21, 25)
Press to locate a specific track of the source or to select
a preset station.

9

 X (PAUSE)
Press to pause the playback of the source.

0

H

Press to operate the selected source.
H (PLAY) button has a tactile dot.**

qa

TOP MENU (page 24)
Press to display the top menu while using
DVP-NW50.

qs G/ F/f /g

Press to select a DVD setup menu on the TV screen.

qd

ENTER
Press to confirm the selection while using DVP-NW50.

qf

RETURN
Press to return to the specified position defined by
DVD or VIDEO CD.

qg

DISPLAY (page 26)
Press to display a search menu.

qh

TV VOL +/– (page 47)
Press to adjust the Sony TV volume.
TV VOL + button  has a tactile dot.**

qj

TV CH +/– (page 47)
Press to change the Sony TV channel.
TV CH + button  has a tactile dot.**

qk

?/1

Press to turn the Unit on/off.

ql

TV ?/1 (page 47)
Press to turn the Sony TV on/off.

w;

CLEAR
Press to clear a number which you entered.

wa

ENTER
Press to set the number you entered using the numeric
buttons.

ws

BACK (page 12, 42)
Press to return to the previous menu or to view the
current status, etc.

wd

m

/M (page 21, 25)

Press to locate a portion you want to play within a
track of the source.

wf

x

Press to stop the current playback.

wg

Press to display a menu while using DVP-NW50.

wh

MUTING (page 20, 22)
Press to mute the speaker output from the Unit on/off.

wj

MASTER VOL +/–
Press to adjust the volume of the speaker output from
the Unit.
MASTER VOL + button has a tactile dot.**

wk

Press to change the viewing angle.

wl

Press to display the Setup display on the TV screen.

e;

Press to select the language of the sound track.

ea

Press to display subtitles or turn them on/off.

**   Use the tactile dot as a reference when operating the system.