Sony DVP-NS930V Service Manual ▷ View online
1-2
9
Front panel display
When playing back a DVD VIDEO/DVD-RW
When playing back a VIDEO CD with Playback Control (PBC) (35)
When playing back a Super Audio CD, CD, DATA CD (MP3 audio), or VIDEO CD (without
PBC)
PBC)
* When playing the HD layer of Super Audio CD
discs, the disc type is not displayed.
Digital
TITLE
TRACK
CHAP
INDEX
ANGLE
NTSC
HOUR
MIN
SEC
MULTI
REPEAT 1
SHUFFLE PGM A–B
Playing time (49)
Disc type
Current audio
signal (53)
signal (53)
Lights up when you can
change the angle (57)
change the angle (57)
Current play
mode (38)
mode (38)
Playing status
Current title and chapter (49)
Lights up when the player outputs
the signal in NTSC format
the signal in NTSC format
Digital
TITLE
TRACK
CHAP
INDEX
ANGLE
NTSC
HOUR
MIN
SEC
MULTI
REPEAT
1
MPEG
SHUFFLE PGM
A–B
Disc type
Playing time (49)
Current scene (49)
Current play mode (38)
Playing status
Lights up when the player outputs the signal in NTSC format
Digital
TITLE
TRACK
CHAP
INDEX
ANGLE
NTSC
HOUR
MIN
SEC
MULTI
REPEAT 1
MP3
SHUFFLE PGM A–B
Playing time (49)
Disc type*
Lights up when
playing MP3
audio tracks (36)
playing MP3
audio tracks (36)
Current play
mode (38)
mode (38)
Current track and index (49)
Playing status
Lights up when the player outputs
the signal in NTSC format
the signal in NTSC format
Lights up when playing the multi-
channel playback area on Super
Audio CDs (34)
channel playback area on Super
Audio CDs (34)
,continued
10
Rear panel
A DIGITAL OUT (COAXIAL) jack (22)
(23) (24)
B DIGITAL OUT (OPTICAL) jack (22)
(23) (24)
C 5.1CH OUTPUT jacks (24)
D LINE OUT L/R (AUDIO) jacks (21)
D LINE OUT L/R (AUDIO) jacks (21)
(22) (23)
E LINE OUT (VIDEO) jack (16)
F S VIDEO OUT jack (16)
G COMPONENT VIDEO OUT (16)
H SCAN SELECT (16)
I LINE 2 jack (16)
J LINE 1 (RGB)-TV jack (16)
F S VIDEO OUT jack (16)
G COMPONENT VIDEO OUT (16)
H SCAN SELECT (16)
I LINE 2 jack (16)
J LINE 1 (RGB)-TV jack (16)
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
AUDIO
L
R
VIDEO
LINE OUT
LINE 1 (RGB)-TV
S VIDEO OUT
LINE 2
Y
P
R/
C
R
SCAN SELECT
P
B/
C
B
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
11
Remote
A TV/DVD switch (67)
B
B
Z
(open/close) button (31)
C Number buttons (33)
The number 5 button has a tactile dot.*
D CLEAR /- (ten’s digit) button (38)
(67)
E SACD (Super Audio CD)/CD button
(35)
F SACD (Super Audio CD) MULTI/
2CH button (34)
G
(subtitle) button (57)
H
(audio) button (52)
I TIME/TEXT button (48)
J REPEAT button (41)
K ./> (previous/next) buttons (31)
L c
J REPEAT button (41)
K ./> (previous/next) buttons (31)
L c
/
C (search/step) buttons
(page 43)
M H (play) button (30)
The H button has a tactile dot.*
N X (pause) button (31)
O C/X/x/c buttons (33)
O C/X/x/c buttons (33)
P DISPLAY button (12)
Q TOP MENU button (33)
R [/1 (on/standby) button (30)
S 2 (volume) +/– buttons (67)
Q TOP MENU button (33)
R [/1 (on/standby) button (30)
S 2 (volume) +/– buttons (67)
The + button has a tactile dot.*
T TV/DVD/t (TV/video) button (67)
U ENTER button (performs the same
U ENTER button (performs the same
function as ed)
V
(wide mode) button (67)
W SHUFFLE button (40)
X A-B button (41)
Y PICTURE NAVI (navigation) button
X A-B button (41)
Y PICTURE NAVI (navigation) button
(46)
Z
(angle) button (57)
wj PICTURE MODE button (59)
wk SUR (surround) button (54)
wl REPLAY button (31)
e; SEARCH MODE button (45)
ea
wk SUR (surround) button (54)
wl REPLAY button (31)
e; SEARCH MODE button (45)
ea
m/M
(scan/slow) buttons
(43)
es x (stop) button (31)
ed ENTER button (26)
ef O RETURN button (31)
eg MENU button (33) (36)
ed ENTER button (26)
ef O RETURN button (31)
eg MENU button (33) (36)
* Use the tactile dot as a reference when operating
the player.
,continued
12
Guide to the Control Menu Display
(Magic Pad)
Use the Control Menu to select a function and to view related information. Press DISPLAY
repeatedly to turn on or change the Control Menu display as follows:
repeatedly to turn on or change the Control Menu display as follows:
z
Hint
You can skip the ADVANCED display by setting
“OFF” under “ADVANCED” in the Control Menu
(page 50).
“OFF” under “ADVANCED” in the Control Menu
(page 50).
Control Menu Display
The Control Menu display 1 and 2 will show different items depending on the disc type. For
details about each item, please refer to the pages in parentheses.
details about each item, please refer to the pages in parentheses.
Example: Control Menu display 1 when playing a DVD VIDEO.
* Displays the scene number for VIDEO CDs
(PBC is on), track number for VIDEO CDs/
Super Audio CDs/CDs, album number for
DATA CDs.
Super Audio CDs/CDs, album number for
DATA CDs.
** Displays the index number for VIDEO CDs/
Super Audio CDs/CDs, MP3 audio track
number for DATA CDs.
number for DATA CDs.
Control Menu display 1
m
Control Menu display 2 (DVD/VIDEO CD only)
m
ADVANCED display (DVD only. See page 50.)
m
Control Menu display off
,
OFF
1: ENGLISH
2: FRENCH
3: SPANISH
1: ENGLISH
2: FRENCH
3: SPANISH
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
DVD VIDEO
Select: Cancel:
SUBTITLE
ENTER
RETURN
Currently playing chapter
number**
number**
Playing time
Total number of chapters**
Options
Current setting
Total number of titles*
Playback status
(N Playback, X Pause, x Stop, etc.)
(N Playback, X Pause, x Stop, etc.)
Function name of
selected Control
Menu item
selected Control
Menu item
Operation message
Selected item
Control Menu
items
items
Type of disc
being played
being played
Currently playing title number*
1-3
13
List of Control Menu items
Item
Item Name, Function, Relevant Disc Type
TITLE (page 45)/SCENE (page 45)/TRACK (page 45)
Selects the title, scene, or track to be played.
Selects the title, scene, or track to be played.
CHAPTER (page 45)/INDEX (page 45)
Selects the chapter or index to be played.
Selects the chapter or index to be played.
ALBUM (page 36)
Selects the album to be played.
Selects the album to be played.
TRACK (page 45)
Selects the track to be played.
Selects the track to be played.
INDEX (page 45)
Selects the index to be played.
Selects the index to be played.
ORIGINAL/PLAY LIST (page 33)
Selects the type of titles (DVD-RW) to be played, the ORIGINAL one, or an edited
PLAY LIST.
Selects the type of titles (DVD-RW) to be played, the ORIGINAL one, or an edited
PLAY LIST.
TIME/TEXT (page 45)
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/Super Audio CD/CD text or the DATA CD’s track name.
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/Super Audio CD/CD text or the DATA CD’s track name.
MULTI/2CH (page 34)
Selects the playback area on Super Audio CDs when available.
Selects the playback area on Super Audio CDs when available.
AUDIO (page 52)
Changes the audio setting.
Changes the audio setting.
SUBTITLE (page 57)
Displays the subtitles.
Changes the subtitle language.
Displays the subtitles.
Changes the subtitle language.
ANGLE (page 57)
Changes the angle.
Changes the angle.
SURROUND (page 54)
Selects the surround functions.
Selects the surround functions.
ADVANCED (page 50)
Displays the information (bit rate or layer) of the disc currently playing.
Displays the information (bit rate or layer) of the disc currently playing.
PARENTAL CONTROL (page 62)
Set to prohibit playback on this player.
Set to prohibit playback on this player.
,continued
14
z
+LQW
7KH&RQWURO0HQXLFRQLQGLFDWRUOLJKWVXSLQJUHHQ
ZKHQ\RXVHOHFWDQ\LWHP
H[FHSW³2))´³6855281'´³352*5$0´
³6+8))/(´³5(3($7´³$%5(3($7´
³%15´³',*,7$/9,'(2(1+$1&(5´RQO\
7KH³$1*/(´LQGLFDWRUOLJKWVXSLQJUHHQRQO\
ZKHQWKHDQJOHVFDQEHFKDQJHG7KH³&86720
3,&785(02'(´LQGLFDWRUOLJKWVXSLQJUHHQ
ZKHQDQ\VHWWLQJRWKHUWKDQ³67$1'$5'´LV
VHOHFWHG
6(783SDJH
48,&.6HWXSSDJH
8VH4XLFN6HWXSWRFKRRVHWKHGHVLUHGODQJXDJHRIWKHRQVFUHHQGLVSOD\WKHDVSHFW
UDWLRRIWKH79WKHDXGLRRXWSXWVLJQDODQGWKHVL]HRIWKHVSHDNHUV\RXDUH
FRQQHFWLQJ
&867206HWXS
,QDGGLWLRQWRWKH4XLFN6HWXSVHWWLQJ\RXFDQDGMXVWYDULRXVRWKHUVHWWLQJV
5(6(7
5HWXUQVWKHVHWWLQJVLQ³6(783´WRWKHGHIDXOWVHWWLQJ
352*5$0SDJH
6HOHFWVWKHWLWOHFKDSWHURUWUDFNWRSOD\LQWKHRUGHU\RXZDQW
6+8))/(SDJH
3OD\VWKHWLWOHFKDSWHURUWUDFNLQUDQGRPRUGHU
5(3($7SDJH
3OD\VWKHHQWLUHGLVFDOOWLWOHVDOOWUDFNVDOODOEXPVUHSHDWHGO\RURQHWLWOHFKDSWHU
WUDFNDOEXPUHSHDWHGO\
$%5(3($7SDJH
6SHFLILHVWKHSDUWV\RXZDQWWRSOD\UHSHDWHGO\
%15SDJH
$GMXVWVWKHSLFWXUHTXDOLW\E\UHGXFLQJWKH³EORFNQRLVH´RUPRVDLFOLNHSDWWHUQVWKDW
DSSHDURQ\RXU79VFUHHQ
&867203,&785(02'(SDJH
$GMXVWVWKHYLGHRVLJQDOIURPWKHSOD\HU<RXFDQVHOHFWWKHSLFWXUHTXDOLW\WKDWEHVW
VXLWVWKHSURJUDPPH\RXDUHZDWFKLQJ
',*,7$/9,'(2(1+$1&(5SDJH
([DJJHUDWHVWKHRXWOLQHRIWKHLPDJHWRSURGXFHDVKDUSHUSLFWXUH
3,&785(1$9,*$7,21SDJH
'LYLGHVWKHVFUHHQLQWRVXEVFUHHQVWRKHOS\RXILQGWKHVFHQH\RXZDQWTXLFNO\
t
15
Hookups
Hookups
Hooking Up the Player
Follow Steps 1 to 6 to hook up and adjust the settings of the player.
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this player to a TV that does not have a video input jack.
• Be sure to disconnect the power cord (mains lead) of each component before connecting.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this player to a TV that does not have a video input jack.
• Be sure to disconnect the power cord (mains lead) of each component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/video cord (pinplug
• Audio/video cord (pinplug
×
3
y pinplug
×
3) (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
• R6 (size AA) batteries (2)
Step 2: Inserting Batteries Into the Remote
You can control the player using the supplied remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor
matching the 3 and # ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor
on the player.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
16
Step 3: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through D, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
In order to view progressive signal (525p or 625p) pictures with a compatible TV, projector, or
monitor, you must use connection D.
Select one of the patterns A through D, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
In order to view progressive signal (525p or 625p) pictures with a compatible TV, projector, or
monitor, you must use connection D.
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL OPTICAL
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
AUDIO
L
R
VIDEO
LINE OUT
LINE 1 (RGB)-TV
S VIDEO OUT
LINE 2
Y
PR/CR
SCAN SELECT
PB/CB
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
INPUT
S VIDEO
B
C
A
AUDIO
INPUT
L
R
VIDEO
D
P
R
/C
R
P
B
/C
B
Y
COMPONENT
VIDEO IN
l : Signal flow
(yellow)
S VIDEO cord
(not supplied)
(not supplied)
Audio/video cord
(supplied)
(supplied)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
to LINE OUT (VIDEO)
to S VIDEO OUT
CD/DVD player
SCART
(EURO AV)
cord (not
supplied)
(EURO AV)
cord (not
supplied)
TV
VCR
connecting
the VCR
the VCR
to T LINE 1
(RGB)-TV
(RGB)-TV
(yellow)
to t
LINE 2
LINE 2
Component
video cord
(not supplied)
video cord
(not supplied)
(green) (blue)
(red)
to COMPONENT
VIDEO OUT
VIDEO OUT
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
(green)
(blue)
(red)
1-4
17
Ho
okups
okups
A
If you are connecting to a SCART (EURO AV) input jack
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV
conforms to S VIDEO or RGB signals. Refer to the operating instructions supplied with the TV
to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN
SETUP” in the Setup Display (page 72), use a SCART (EURO AV) cord that conforms to each
signal.
avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV
conforms to S VIDEO or RGB signals. Refer to the operating instructions supplied with the TV
to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN
SETUP” in the Setup Display (page 72), use a SCART (EURO AV) cord that conforms to each
signal.
If you are connecting to a VCR
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from
your TV.
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from
your TV.
B
If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are
connecting to a TV only.)
connecting to a TV only.)
C
If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
D
If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, P
B
/C
B
, P
R
/C
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, you must use this connection and set
“COMPONENT OUT” to “PROGRESSIVE” in “SCREEN SETUP” (page 71). The
PROGRESSIVE indicator lights up when the player outputs progressive signals.
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, you must use this connection and set
“COMPONENT OUT” to “PROGRESSIVE” in “SCREEN SETUP” (page 71). The
PROGRESSIVE indicator lights up when the player outputs progressive signals.
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 71.
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 71.
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
Red
Green
Blue
Red
Green
Blue
,continued
18
Notes
• Do not connect a VCR, etc. between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
connect the player to this jack.
• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set
to the player automatically when you start playback. In this case, press TV/DVD on the remote to return
the input to the TV.
the input to the TV.
• If you set “LINE” to “RGB” in SCREEN SETUP (page 27, 73), the player outputs no component video
signals.
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In the case of progressive scan picture problems, it is
recommended that you switch the connection to the standard definition output. If there are questions
regarding your Sony TV set’s compatibility with this DVD player, please contact our customer service
centre.
recommended that you switch the connection to the standard definition output. If there are questions
regarding your Sony TV set’s compatibility with this DVD player, please contact our customer service
centre.
• If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB
component jacks, set
to t (Audio/Video) on your TV. When you select
(RGB), the TV
cannot receive the signal from the VCR.
• If you want to use your VCR’s SmartLink function, connect the VCR to your TV’s SCART (EURO AV)
jack and connect the player to the TV with another jack.
• The SmartLink function may not work properly if your VCR is connected to your TV via the SCART
(EURO AV) jacks on the player.
VCR
CD/DVD player
TV
Connect
directly
directly
19
Hookups
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects: TVS DYNAMIC (page 54),
• Surround effects: TVS DYNAMIC (page 54),
TVS WIDE (page 54)
(page 21)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 55)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 55)
• Surround effects: TVS STANDARD (page 55)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 55)
(page 22)
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 82)
(page 23)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 82)
– DTS (5.1 ch) (page 82)
– Super Audio CD Multi channel (page 83)
– MPEG audio (5.1 ch) (page 83)
– DTS (5.1 ch) (page 82)
– Super Audio CD Multi channel (page 83)
– MPEG audio (5.1 ch) (page 83)
or
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
• Surround effects:
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 82)
– DTS (5.1 ch) (page 82)
– MPEG audio (5.1 ch) (page 83)
– DTS (5.1 ch) (page 82)
– MPEG audio (5.1 ch) (page 83)
(page 24)
A
D
A
B
C
D
,continued
20
z
Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
conforms to the 96 kHz sampling frequency, use
connection .
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol
are trademarks of Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol
are trademarks of Dolby Laboratories.
** Manufactured under license from Digital
Theater Systems, Inc. US Pat. No. 5,451,942,
5,956,674, 5,974,380, 5,978,762 and other
world-wide patents issued and pending. “DTS”
and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
5,956,674, 5,974,380, 5,978,762 and other
world-wide patents issued and pending. “DTS”
and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
D
1-5
21
Ho
okups
okups
Connecting to your TV
This connection will use your TV speakers for sound. If you use the SCART (EURO AV) cord
in
in
A
of “Step 3: Connecting the Video Cords” (page 16), you do not have to connect audio
cords to your TV.
* The yellow plug is used for video signals (page
16).
z
Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
A
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL OPTICAL
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
AUDIO
L
R
VIDEO
LINE OUT
LINE 1 (RGB)-TV
S VIDEO OUT
LINE 2
A
AUDIO
L
R
VIDEO
LINE OUT
Y
PR/CR
SCAN SELECT
PB/CB
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
TV
l : Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied)
cord (supplied)
to audio input
(yellow)*
(white)
(red)
(yellow)*
to LINE OUT L/R (AUDIO)
,continued
22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
your stereo amplifier (receiver).
z
Hints
• In connection
, you can use the supplied
audio/video cord instead of using a separate stereo
audio cord.
audio cord.
• To realize better surround sound effects, make
sure that your listening position is in between
your speakers.
your speakers.
Note
Super Audio CD audio signals are not output from
the digital jack.
the digital jack.
B
B-1
B-2
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL OPTICAL
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
AUDIO
L
R
VIDEO
LINE OUT
LINE 1 (RGB)-TV
S VIDEO OUT
LINE 2
B-2
B-1
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
AUDIO
L
R
VIDEO
LINE OUT
Y
PR/CR
SCAN SELECT
PB/CB
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital
cord (not supplied)
cord (not supplied)
Stereo audio cord
(not supplied)
(not supplied)
to audio input
to coaxial or optical
digital input
digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
or
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
l: Signal flow
B-1
23
Hookups
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
z
Hint
For correct speaker location, refer to the operating
instructions of the amplifier (receiver).
instructions of the amplifier (receiver).
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a centre speaker, 2
rear speakers and a subwoofer.
rear speakers and a subwoofer.
• Super Audio CD audio signals are not output from
the digital jack.
C
C-1
C-2
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL OPTICAL
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
AUDIO
L
R
VIDEO
LINE OUT
LINE 1 (RGB)-TV
S VIDEO OUT
LINE 2
C-2
C-1
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
AUDIO
L
R
VIDEO
LINE OUT
Y
PR/CR
SCAN SELECT
PB/CB
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Centre
Rear (mono)
Stereo
audio cord (not
supplied)
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(not supplied)
(red)
(white)
to coaxial or optical digital
input
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
,continued
24
Connecting to an AV amplifier (receiver) with 5.1 ch input jacks and/or a
digital input jack and 4 to 6 speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
.
If you want to use the Dolby Digital, MPEG audio, or DTS decoder function on your AV
amplifier (receiver), connect to its digital jack using
amplifier (receiver), connect to its digital jack using
. With the following connections, you
can enjoy a more realistic audio presence in the comfort of your own home.
D
D-1
D-2
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL OPTICAL
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
AUDIO
L
R
VIDEO
LINE OUT
LINE 1 (RGB)-TV
S VIDEO OUT
LINE 2
5.1CH OUTPUT
W O O F E R
L
R
FRONT
REAR
C E N T E R
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
COAXIAL OPTICAL
D-2
D-1
Y
PR/CR
SCAN SELECT
PB/CB
COMPONENT VIDEO OUT
SELECTABLE
INTERLACE
PROGRESSIVE
l: Signal flow
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
5.1ch inputs or/and a decoder
5.1ch inputs or/and a decoder
Subwoofer
Centre
Coaxial digital cord
(not supplied)
(not supplied)
Monaural audio cord
(not supplied)
(not supplied)
Stereo audio cord
(not supplied)
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
CD/DVD player
[Speakers]
Rear (L)
to audio input
to coaxial or optical
digital input
digital input
or
or
to 5.1CH
OUTPUT
OUTPUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
Click on the first or last page to see other DVP-NS930V service manuals if exist.