Sony DVP-NS758HP Service Manual ▷ View online
6-4
DVP-NS758HP
2-2. Operation of Auto Self Check
When the Self Check mode becomes active at the AC Power ON or by key input, the test display of the following steps (1) to (4) is repeated.
(1) FLD and all ON (for 5 seconds)
(2) MODEL display (for 2 seconds)
3)
USB/NON USB (2 seconds)
4)
Version display (2 seconds)
2-3. Each Self Check Function
Each Self Check function tests the FLD display, LED display, and key input.
Input
IC404: Pin No. (Signal)
Voltage [V]
PIN
ef (AD1)
PIN
eg (O/C)
PIN
eh (AD2)
PIN
ej (POWER)
0 - 0.20
PLAY
OPEN/CLOSE
STOP
POWER
0.6 - 0.8
OR
6-5
DVP-NS758HP
2-3-1. FLD All ON
2-3-1-1. Transition Keys in Self Check Mode
• Z key and x key on the main unit
• T key on the remote commander
2-3-1-2. Operation and display
In this mode, all segments of FLD turn ON.
• Example of FLD all ON
2-3-2. Main Unit Key Name Display and Key Code Display
2-3-2-1. Transition Keys in Self Check Mode
• Keys on the main unit except keys transited in Self Check Mode
2-3-2-2. Operation and Display
When a key on the main unit is pressed in the Self Check mode, the key code is displayed on the FLD. 'KEY FF' is displayed when
nothing is entered. Also, PLAY, PAUSE, REPEAT
segments turn on when a communication error occurred.
• Key code display (at input of H key, key code: 0Ah)
• At input of faulty voltage
• When key is pressed double
6-6
DVP-NS758HP
2-3-5. FLD Anode Test Display and SHUTTLE Click Operation Test
2-3-5-1. Transition Keys in Self Check Mode
• t key on the remote commander
• SHUTTLE on the remote commander during Anode Test display (This unit does not provide JOG/SHUTTLE, and therefore use another
DVD remote commander having the JOG/SHUTTLE)
2-3-5-2. Operation and Display
The Self Check Mode transits to this mode when t key is entered. This tests whether each segment turns on individually. Only the first
segment of each grid of FLD turns on, and each time the SHUTTLE is entered, the segment of each grid switched in order. When SHUTTLE
input is clockwise or remote number 6, the segment switches in 1 - 2 -3 direction, or counterclockwise or remote number 4 it switches in 3
- 2- 1 direction.
• Display at the start of Anode Test
r (Input in CW direction)
2-3-3. Remote Commander Key Name Display and Key Code Display
2-3-3-1. Transition Keys in Self Check Mode
• Remote commander keys except keys transited in Self Check Mode
2-3-3-2. Operation and Display
When a key on the remote commander is pressed in the Self Check Mode, the key code is displayed on the FLD. 'REM FF' is displayed
nothing is entered. Also,
segments turn on when a communication error occurred.
• Remote commander key code display (at input of X key, key code:39h)
2-3-4. Communication Monitoring Display
The communication state is monitored and displayed while the key name on the main unit and the remote commander is displayed.
When the communication to the System Controller failed, PLAY, PAUSE, REPEAT
segments turn on.
• Communication error display (at code display without input of the remote commander)
6-7
DVP-NS758HP
2-3-6. FLD Grid Test Display and SHUTTLE Click Operation Test
2-3-6-1. Transition Keys in Self Check Mode
• R key on the remote commander
• SHUTTLE on the remote commander during Grid Test display
(This unit does not provide JOG/SHUTTLE, and therefore use another DVD remote commander having the JOG/SHUTTLE)
2-3-6-2. Operation and Display
The Self Check Mode transits to this mode when R key is entered. This tests whether each grid turns on individually. The first grid only of
FLD turns on and other grid turn off. Each time the SHUTTLE is entered, the grid is switched in order. When SHUTTLE input is cl ockwise
or remote number 6 repeatedly, the grid switched in 1 - 2 - 3 direction, or counterclockwise or remote number 4 repeatedly it switches in 3
- 2 - 1 direction.
• Display at the start of Grid Test
r (Input in CW direction)
Click on the first or last page to see other DVP-NS758HP service manuals if exist.