DOWNLOAD Sony DVP-NS715P Service Manual ↓ Size: 17.81 MB | Pages: 94 in PDF or view online for FREE

Model
DVP-NS715P
Pages
94
Size
17.81 MB
Type
PDF
Document
Service Manual
Brand
Device
DVD
File
dvp-ns715p.pdf
Date

Sony DVP-NS715P Service Manual ▷ View online

1-3
14
Hint
The Control Menu icon indicator lights up in green 
when you select any item 
except “OFF.” (“TVS,” “PROGRAM,” 
“SHUFFLE,” “REPEAT,” “A-B REPEAT,” 
“BNR,” “DIGITAL VIDEO ENHANCER” only). 
The “ANGLE” indicator lights up in green only 
when the angles can be changed. The “CUSTOM 
PICTURE MODE” indicator lights up in green 
when any setting other than “STANDARD” is 
selected.
SHUFFLE (page 38)
Plays the title, chapter, or track in random order.
 
 
REPEAT (page 39)
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/
track/album repeatedly.
 
 
 
 
A-B REPEAT (page 39)
Specifies the parts you want to play repeatedly.
 
 
 
BNR (page 52)
Adjusts the picture quality by reducing the “block noise” or mosaic like patterns that 
appear on your TV screen.
 
 
CUSTOM PICTURE MODE (page 53)
Adjusts the video signal from the player. You can select the picture quality that best 
suits the program you are watching.
 
 
DIGITAL VIDEO ENHANCER (page 55)
Exaggerates the outline of the image to produce a sharper picture.
PICTURE NAVIGATION (page 42)
Divides the screen into 9 subscreens to help you find the scene you want quickly.
t
15
Si
m
p
le
 St
art
 Gu
id
e
Simple Start Guide
Quick Overview
A quick overview presented in this guide will 
give you enough information to start using the 
player for your enjoyment. To use the 
surround sound features of this player, refer 
to “Hookups” on page 18.
Notes
• You cannot connect this player to a TV that does 
not have a video input jack. 
• Be sure to disconnect the power cord of each 
component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/video cord (pinplug 
×
 3 y pinplug 
×
 3) (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
Step 2: Inserting 
Batteries into the 
Remote
You can control the player using the supplied 
remote. Insert two Size AA (R6) batteries by 
matching the 3 and # ends on the batteries 
to the markings inside the compartment. 
When using the remote, point it at the remote 
sensor 
 on the player.
Notes
• Do  not leave the remote in an extremely hot or 
humid place. 
• Do  not drop any foreign object into the remote 
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light 
from the sun or a lighting apparatus. Doing so 
may cause a malfunction. 
• If you do not use the remote for an extended 
period of time, remove the batteries to avoid 
possible damage from battery leakage and 
corrosion.
16
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (1~3) shown below. 
Be sure to connect the power cord last.
When connecting to a wide screen TV
Depending on the disc, the image may not fit 
your TV screen.
If you want to change the aspect ratio, please 
refer to page 65.
When connecting to a TV that accepts 
progressive (480p) format signals
You need to use the COMPONENT VIDEO 
OUT jacks to view progressive signals. Hook 
up your TV using pattern C on page 18, and 
then run Quick Setup on page 25.
Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the 
LINE OUT (VIDEO) 1/2 jack on the player to the 
TV’s video input jack, and connect the LINE OUT 
L/R (AUDIO) 1/2 jacks to the TV’s audio input 
jack.
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
COMPONENT VIDEO OUT
Y
SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE
PB
PR
1
2
S VIDEO
OUT
VIDEO
AUDIO
INPUT
L
R
(yellow)
(white)
(red)
R
1
2
L
AUDIO
VIDEO
LINE OUT
to LINE OUT 
(VIDEO)1 or 2
to audio input
1
 Audio/video 
cord (supplied)
2
 Power source
to video input
to LINE OUT 
L/R (AUDIO)1 
or 2
CD/DVD Player
TV
3
 Power source
l : Signal flow
17
Si
m
p
le
 St
art
 Gu
id
e
Step 4: Playing a Disc
Turn on the TV.
Press [/1 on the player.
Switch the input selector on your 
TV so that the signal from the 
player appears on the TV screen.
Press on the player to open the 
disc tray.
Place the disc on the tray with the 
playback side facing down.
Press H.
The disc tray closes and the player begins 
playing the disc.
After Step 6
Depending on the disc, a menu may be 
displayed on the TV screen. If so, select the 
item you want from the menu and play the 
DVD VIDEO (page 32) or VIDEO CD disc 
(page 33).
To stop playing
Press x.
To remove the disc
Press A.
To turn off the player
Press [/1. The player enters standby mode 
and the power indicator lights up in red.
With the playback side facing down
1-4
18
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords, check that you have all of the supplied accessories, 
and insert the batteries into the remote (page 15).
Notes
• Plug  cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. 
Select one of the patterns A through C, according to the input jack on your TV monitor, 
projector, or AV amplifier (receiver).
B
A
C
INPUT
S VIDEO
P
R
P
B
Y
COMPONENT
VIDEO IN
VIDEO
AUDIO
INPUT
L
R
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
1
2
S VIDEO
OUT
COMPONENT VIDEO OUT
Y
SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE
PB
PR
Audio/video 
cord 
(supplied)
l : Signal flow
Component 
video cord 
(not supplied)
(yellow)
TV, projector or AV 
amplifier (receiver)
CD/DVD player
TV, projector or AV 
amplifier (receiver)
(green)
S VIDEO cord 
(not supplied)
TV, projector or AV 
amplifier (receiver)
(red)
(blue)
(yellow)
(green)
(blue)
(red)
to LINE OUT (VIDEO)1 or 2
to COMPONENT 
VIDEO OUT
to S VIDEO OUT 1 or 2
19
H
ook
up
s
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will 
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are 
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver) 
having component video input jacks (Y, P
B
, P
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video 
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will 
enjoy accurate color reproduction and high quality images. If your TV accepts progressive 
(480p) format signals, you must use this connection and set “COMPONENT OUT” to 
“PROGRESSIVE” in “SCREEN SETUP” (page 65).
Notes
• Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear 
image on the TV screen.
• Consumers should note that not all high definition television sets are fully compatible with this product and 
may cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it 
is recommended that you switch the connection to the standard definition output. If there are questions 
regarding your Sony TV set’s compatibility with this model 480p DVD player, please contact our customer 
service center.
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
Green
Blue
Red
Green
Blue
Red
VCR
CD/DVD player
TV
Connect 
directly
20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read 
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, 
 through 
 * Manufactured under license from Dolby 
Laboratories. “Dolby,” “Pro Logic,” and the 
double-D symbol are trademarks of Dolby 
Laboratories.
** “DTS” and “DTS Digital Out” are trademarks 
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup
TV
• Surround effects: TVS DYNAMIC (page 50), 
TVS WIDE (page 50)
 (page 21)
example
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 50)
or
MD deck/DAT deck
• Surround effects: none
 (page 22)
example
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6 
speakers
• Surround effects: Dolby Surround (Pro Logic) 
(page 73)
 (page 23)
example
AV amplifier (receiver) with a digital input jack 
having a Dolby Digital or DTS
** decoder and 6 
speakers
• Surround effects: Dolby Digital (5.1ch) (page 73), 
DTS (5.1ch) (page 73)
 (page 24)
example
A
D
A
B
C
D
21
H
ook
up
s
 Connecting to your TV
This connection will use your TV speakers for sound.
* The yellow plug is used for video signals (page 
18).
Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the 
LINE OUT L/R (AUDIO) 1/2 jacks to the TV’s 
audio input jack.
A
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
1
2
S VIDEO
OUT
COMPONENT VIDEO OUT
Y
SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE
PB
PR
R
1
2
L
AUDIO
VIDEO
LINE OUT
A
TV
l : Signal flow
CD/DVD player
(white)
(red)
Audio/video 
cord (supplied)
to audio input
(yellow)
(white)
(red)
(yellow)*
to LINE OUT L/R 
(AUDIO) 1 or 2
,continued
1-5
22
 Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to 
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use 
. If the amplifier 
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use 
In this case, you can also connect the player directly to the MD deck or DAT deck without using 
your stereo amplifier (receiver).
Hint
In connection
, you can use the supplied 
audio/video cord instead of using a separate stereo 
audio cord.
Note
If you select one of the TVS effects (page 49) while 
playing a disc, no sound will come from your 
speakers with the 
 connection.
B
B-1
B-2
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
1
2
S VIDEO
OUT
COMPONENT VIDEO OUT
Y
SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE
PB
PR
B-2
B-1
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital 
cord (not supplied)
Stereo audio cord 
(not supplied)
to audio input
to coaxial or optical 
digital input
Optical digital cord 
(not supplied)
Remove jack cap 
before connecting
or
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT 
(COAXIAL or OPTICAL)
l: Signal flow
B-1
B-2
23
H
ook
up
s
 Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro 
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use 
. If your amplifier 
(receiver) has a digital input jack, use 
.
Note
When connecting 6 speakers, replace the monaural 
rear speaker with a center speaker, 2 rear speakers 
and a subwoofer.
C
C-1
C-2
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
1
2
S VIDEO
OUT
COMPONENT VIDEO OUT
Y
SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE
PB
PR
C-2
C-1
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l: Signal flow
Rear (L)
Amplifier (receiver) with Dolby 
Surround decoder
Center
Rear (mono)
Stereo 
audio cord (not 
supplied)
[Speakers]
Coaxial digital cord 
(not supplied)
(red)
(white)
to coaxial or optical digital 
input
Optical digital cord 
(not supplied)
Remove jack cap 
before connecting
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT 
(COAXIAL or OPTICAL)
,continued
24
 Connecting to an AV amplifier (receiver) with a digital input jack having 
a Dolby Digital or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV 
amplifier (receiver). You are unable to enjoy the surround sound effects of this player.
Note
After you have completed the connection, be sure to 
set “DOLBY DIGITAL” to “DOLBY DIGITAL” 
and “DTS” to “ON” in Quick Setup (page 25).
D
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
1
2
S VIDEO
OUT
COMPONENT VIDEO OUT
Y
SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE
PB
PR
D
PCM/DTS/DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
 AV amplifier (receiver) having 
a decoder
Subwoofer
Center
Coaxial digital cord 
(not supplied)
Optical digital cord 
(not supplied) 
Remove jack cap 
before connecting
[Speakers]
CD/DVD player
l: Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital 
input
to DIGITAL OUT 
(COAXIAL or 
OPTICAL)
25
H
ook
up
s
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press
[/1.
3
Switch the input selector on your 
TV so that the signal from the 
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP” 
appears at the bottom of the screen. If this 
message does not appear, select 
“QUICK” under “SETUP” in the Control 
Menu to run Quick Setup (page 64).
4
Press ENTER without inserting a 
disc.
The Setup Display for selecting the 
language used in the on-screen display 
appears.
5
Press 
X/x to select a language.
The player uses the language selected 
here to display the menu and subtitles as 
well.
6
Press ENTER.
The Setup Display for selecting the 
aspect ratio of the TV to be connected 
appears.
7
Press 
X/x to select the setting that 
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN 
(page 65)
◆ If you have a wide-screen TV or a 4:3 
standard TV with a wide-screen mode
• 16:9 (page 65)
8
Press ENTER.
The Setup Display for selecting the type 
of video signal appears.
./>
X/x
ENTER
[/1
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
4:3 PAN SCAN
4:3 LETTER BOX
COMPONENT OUT:
   MODE:
AUTO
16:9
,continued
1-6
26
9
Press
X/x to select the type of 
signals you wish to output to your 
TV.
Select “PROGRESSIVE” only if you 
have made video connection C (page 18) 
and wish to view progressive video 
signals.
◆ Interlace format TV (standard TV)
• INTERLACE (pages 65)
◆ Progressive format TV
• PROGRESSIVE (pages 65)
10
Press ENTER.
The Setup Display for selecting the type 
of jack used to connect your amplifier 
(receiver) appears.
11
Press 
X/x to select the type of 
jack (if any) you are using to 
connect to an amplifier (receiver), 
then press ENTER.
Choose the item that matches the audio 
connection you selected on pages 21 to 
24 (
 through ).
• If  you connect just a TV and nothing 
else, select “NO.” Quick Setup is 
finished and connections are complete.
• Select “LINE OUTPUT L/R 
(AUDIO).” Quick Setup is finished and 
connections are complete.
• Select “DIGITAL OUTPUT.” The Setup 
Display for “DOLBY DIGITAL” appears.
12
Press 
X/x to select the type of 
Dolby Digital signal you wish to 
send to your amplifier (receiver).
Choose the signal that matches the audio 
connection you selected on pages 22 to 
24 (
  through ).
• D-PCM (page 69)
• DOLBY DIGITAL (only if the 
amplifier (receiver) has a Dolby Digital 
decoder) (page 69)
13
Press ENTER.
“DTS” is selected.
14
Press 
X/x to select whether or 
not you wish to send a DTS signal 
to your amplifier (receiver).
Choose the item that matches the audio 
connection you selected on pages 22 to 
24 (
  through ).
• OFF  (page 69)
• ON (only if the amplifier (receiver)  has 
a DTS decoder) (page 69)
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
ON
JACKET PICTURE
INTERLACE
COMPONENT OUT:
   MODE:
PROGRESSIVE
INTERLACE
YES
NO
Is this player connected to an amplifier 
(receiver) ? Select the type of jack you 
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DOLBY DIGITAL
D-PCM
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DTS:
OFF
OFF
ON
B
D
B-2
C-2
D
27
H
ook
up
s
15
Press ENTER.
Quick Setup is finished. All connections 
and setup operations are complete.
Enjoying the surround sound 
effects
To enjoy the surround sound effects of this 
player or your amplifier (receiver), set the 
following items as described below for the 
audio connection you selected on pages 22 to 
24 (
 through 
). Each of these is the 
default setting and does not need to be adjusted 
when you first connect the player. Refer to 
page 63 for using the Setup Display.
Audio Connection (pages 21 to 24)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY 
SURROUND” (page 69)
• If  the  sound distorts even when the volume 
is turned down, set “AUDIO ATT” to “ON” 
(page 68)
• Set “DOWNMIX” to “DOLBY 
SURROUND” (page 69)
• Set “DIGITAL OUT” to “ON” (page 69)
B
D
A
B-1
C-1
B-2
C-2
D
28
Playing Discs
Playing Discs 
 
 
 
Depending on the DVD or VIDEO CD, some 
operations may be different or restricted.
Refer to the operating instructions supplied 
with your disc.
1
Turn on your TV.
2
Press
[/1.
The player turns on and the power 
indicator lights up in green.
3
Switch the input selector on your 
TV so that the signal from the 
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and 
select the appropriate channel so that you 
can hear sound from the player.
4
Press 
A on the player, and place a 
disc on the disc tray.
5
Press 
H.
The disc tray closes, and the player starts 
playback (continuous play). Adjust the 
volume on the TV or the amplifier 
(receiver).
Depending on the disc, a menu may 
appear on the TV screen. For DVD 
VIDEOs, see page 32. For VIDEO CDs, 
see page 33.
To turn off the player
Press [/1. The player enters standby mode.
Hint
You can have the player turn off automatically 
whenever you leave it in stop mode for more than 
30 minutes. To turn on this function, set “AUTO 
POWER OFF” in “CUSTOM SETUP” to “ON” 
(page 67).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs, 
excessive noise will be heard from the 
analog stereo jacks. To avoid possible 
damage to the audio system, the consumer 
should take proper precautions when the 
analog stereo jacks of the player are 
connected to an amplification system. To 
enjoy DTS Digital Surround™ playback, an 
external 5.1-channel decoder system must 
be connected to the digital jack of the 
player.
• Set the sound to “STEREO” using the 
AUDIO button when you play DTS sound 
tracks on a CD (page 48).
• Do not play DTS sound tracks without first 
connecting the player to an audio 
component having a built-in DTS decoder.
The player outputs the DTS signal via the 
DIGITAL OUT (COAXIAL or OPTICAL) 
jack even if “DTS” in “AUDIO SETUP” is 
[/1
H
Power 
indicator
A
[/1
Z
AUDIO
H
With the playback side facing down
29
Pl
ay
in
g Di
sc
s
set to “OFF” in the Setup Display (page 69), 
and may affect your ears or cause your 
speakers to be damaged.
Notes on playing DVD VIDEOs with a DTS 
sound track
• DTS  audio signals are output only through 
the DIGITAL OUT (COAXIAL or 
OPTICAL) jack.
• When you play a DVD VIDEO with DTS 
sound tracks, set “DTS” to “ON” in 
“AUDIO SETUP” (page 69).
• If you connect the player to audio 
equipment without a DTS decoder, do not 
set “DTS” to “ON” in “AUDIO SETUP” 
(page 69). A loud noise may come out from 
the speakers, affecting your ears or causing 
the speakers to be damaged.
Additional operations
Hint
The Replay function is useful when you want to 
review a scene or dialog that you missed.
Note
You may not be able to use the Replay function with 
some scenes.
Locking the disc tray (Child 
Lock)
You can lock the disc tray to prevent children 
from opening it.
When the player is in standby mode, press 
RETURN, ENTER, and then [/1 on the 
remote.
The player turns on and “LOCKED” appears 
on the front panel display.
The Z button on the player or the remote does 
not work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press 
O RETURN, ENTER, and then [/1 again. 
Note
Even if you select “RESET” under “SETUP” in the 
Control Menu (page 64), the disc tray remains 
locked.
To
Operation
Stop
Press x
Pause
Press X
Resume play after 
pause
Press X or H
Go to the next chapter, 
track, or scene in 
continuous play mode
Press >
Go back to the 
previous chapter, 
track, or scene in 
continuous play mode
Press .
Stop play and remove 
the disc
Press Z
Z
./>
H
REPLAY
X
x
Replay the previous 
scene (DVD VIDEO 
only)
Press REPLAY
To
Operation
ENTER
O RETURN
[/1
Page of 94
Display

Click on the first or last page to see other DVP-NS715P service manuals if exist.