Sony DVP-NC80V Service Manual ▷ View online
7-3
DVP-NC80V
1.0 ±0.08 Vp-p
A
B
5.
Checking Component Video Output Y
<Purpose>
This checks component video output Y. If it is incorrect, correct
brightness will not be attained when connected to, for instance,
projector.
This checks component video output Y. If it is incorrect, correct
brightness will not be attained when connected to, for instance,
projector.
Mode
HLX-504 play back
Signal
Color bars
Test point
COMPONENT VIDEO OUT (Y)
connector, (75
connector, (75
Ω terminated)
Instrument
Oscilloscope
Specification
1.0 ± 0.08 Vp-p
Checking method:
1)
1)
In the Video Signal menu “1” Color Bar 100% play back.
2)
Confirm that the Y level is 1.0 ± 0.08 Vp-p.
Fig. 7-5.
6.
Checking Component Video Output B-Y
<Purpose>
This checks component video output B-Y. If it is incorrect, correct
colors will not be displayed when connected to, for instance, projector.
This checks component video output B-Y. If it is incorrect, correct
colors will not be displayed when connected to, for instance, projector.
Mode
HLX-504 play back
Signal
Color bars
Test point
COMPONENT VIDEO OUT (P
B
)
connector (75
Ω terminated)
Instrument
Oscilloscope
Specification
A = 700 ± 70 mVp-p (US,Canadian)
Checking method:
1)
1)
In the Video Signal menu “1” Color Bar 100% play back.
2)
Confirm that the B-Y level is A.
Fig. 7-6.
7.
Checking Component Video Output R-Y
<Purpose>
This checks component video output R-Y. If it is incorrect, correct
colors will not be displayed when connected to, for instance, projector.
This checks component video output R-Y. If it is incorrect, correct
colors will not be displayed when connected to, for instance, projector.
Mode
HLX-504 play back
Signal
Color bars
Test point
COMPONENT VIDEO OUT (P
R
)
connector (75
Ω terminated)
Instrument
Oscilloscope
Specification
B = 700 ± 70 mVp-p (US,Canadian)
Checking method:
1)
1)
In the Video Signal menu “1” Color Bar 100% play back.
2)
Confirm that the R-Y level is B.
Fig. 7-7.
7-4E
DVP-NC80V
MEMO
8-2
DVP-NC80V
Note :
The components identified
by mark
The components identified
by mark
or dotted line
with mark
are critical for
safety.
Replace only with par t
number specified.
Replace only with par t
number specified.
Note :
Les composants identifiés par
une marque
Les composants identifiés par
une marque
sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ref. No.
Part No.
Description
Remark
1 3-077-331-11 +BV3 (3-CR)
2 3-070-883-31 SCREW, TAPPING BLACK
2 3-070-883-41 SCREW, TAPPING SILVER
3 X-2025-496-1 CASEASSY,UPPER(B-S) BLACK
2 3-070-883-31 SCREW, TAPPING BLACK
2 3-070-883-41 SCREW, TAPPING SILVER
3 X-2025-496-1 CASEASSY,UPPER(B-S) BLACK
3 X-2050-481-1 CASEASSY,UPPER(S-S) SILVER
7
1-468-864-11
POWER SUPPLY BLOCK
8 3-957-819-01 FOOT
9
9
1-479-326-11
REMOTE COMMANDER (RMT-179A)
10
2-587-813-01
DISPLAY FILTER
11 3-632-494-01 RE-USE CLAMP
12
12
1-828-876-11
FFC FIM-004
13
1-828-877-11
FFC FIM-005
14
1-828-878-11
FFC FIS-004
15
1-828-875-11
FFC FMO-012
16 1-963-006-11 FLEXIBLE FLAT CABLE (FMA-014)
17 1-963-007-11 FLEXIBLE FLAT CABLE (FMA-015)
18 A-1110-423-A AV-087(1970SM-U2)COMPL
19 A-1110-421-A MB-117(1970SM-U2)COMPL
19 A-1110-421-A MB-117(1970SM-U2)COMPL
4 1-828-451-21 POWER-SUPPLY CORD
5 3-077-331-21 +BV3 (3-CR)
5 3-077-331-21 +BV3 (3-CR)
20 A-1110-425-A IF-135(1970SM-U2)COMPL
21 3-081-834-21 COVER BATTERY
Click on the first or last page to see other DVP-NC80V service manuals if exist.