Sony DVP-NC60K / DVP-NC62K Service Manual ▷ View online
2-6
DVP-NC60K/NC62K
2-9. OPTICAL PICK-UP
(DEVICE, OPTICAL KHM-310CAB/C2RP)
4
FMO-006 Flat Flexible Cable
(24P)
5
Optical Pick-Up
2
Four Insulator Screws
3
MD-109 Harness
(6P)
1
BU Holder
Note:
Solder short land before
remove the harness from
24 pin BU connector.
remove the harness from
24 pin BU connector.
Short Land Position
Caution Point on the Laser Diode:
Laser Diode in the optical Device is very sensitive to Surge
Current or ElectroStatic Discharge (ESD):
Laser Diode in the optical Device is very sensitive to Surge
Current or ElectroStatic Discharge (ESD):
After take-out FMO-006 Flexible cable from CN101 of
MV-045 board immediately ground FMO-006 Flexible cable
pattern using short clip. Metal paper clip can be used as
short clip.
MV-045 board immediately ground FMO-006 Flexible cable
pattern using short clip. Metal paper clip can be used as
short clip.
2-7
DVP-NC60K/NC62K
3
Five Screws +BV2.6 (3-CR)
5
MC-154 Board
Front Panel
Cover tray
2
FIS-004 Flat Flexible Cable
(CN501, 11P)
SW-443 Board
4
FR-231 Board
3
1
Four Screws +BV2.6 (3-CR)
2-11.FR-231, SW-443 and MC-154 BOARDS
2
Two Screws
+BV3
(3-CR)
3
Two Claws
Holder, PS
4
Power Block
1
PM-124 Harness
(CN201,
10P)
Power Cord
2-10.POWER BLOCK
2-8
DVP-NC60K/NC62K
Optical Pick-Up
(Device, Optical
KHM-310CAB/C2RP
Service Assembly)
(Device, Optical
KHM-310CAB/C2RP
Service Assembly)
TD Unit Ass'y
PH101 (on the SE-145 Board)
PH102
(on the SE-145 Board)
(on the SE-145 Board)
Encoder Ass'y
(Loading)
(Loading)
Loading Motor Ass'y
2-12.INTERNAL VIEWS
2-9E
DVP-NC60K/NC62K
IF-127 Board
(INTERFACE)
(INTERFACE)
SW-443 Board
(SWITCH)
(SWITCH)
Power Board
FR-231 Board
(FR)
(FR)
MC-154 Board
MV-045 Board
(CPU, Servo-DSP, AVDEC,
DRIVE, VIDEO, AUDIO, POWER)
(CPU, Servo-DSP, AVDEC,
DRIVE, VIDEO, AUDIO, POWER)
2-13.CIRCUIT BOARDS LOCATION
Click on the first or last page to see other DVP-NC60K / DVP-NC62K service manuals if exist.