Sony DVP-LS755P Service Manual ▷ View online
1-6
26
13
Press X/x to select the type of
jack (if any) you are using to
connect to an amplifier (receiver),
connect to an amplifier (receiver),
then press ENTER.
Choose the item that matches the audio
connection you selected on pages 20 to
23 (
connection you selected on pages 20 to
23 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “DIGITAL OUTPUT.” The
Setup Display for “DOLBY DIGITAL”
appears.
appears.
14
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 21 to
23 (
connection you selected on pages 21 to
23 (
through
).
• D-PCM (page 71)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 71)
decoder) (page 71)
15
Press ENTER.
“DTS” is selected.
16
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 21 to
23 (
connection you selected on pages 21 to
23 (
through ).
• OFF (page 71)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 71)
17
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 71).
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, set “MPEG” to
“MPEG” (page 71).
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
DTS:
DOLBY DIGITAL
D-PCM
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
DTS:
OFF
OFF
OFF
ON
48kHz/96kHz PCM:
B
D
B-2
C-2
D
27
H
ook
up
s
s
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 21 to
23 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 21 to
23 (
through
). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 65 for using the Setup Display.
adjusted when you first connect the player.
See page 65 for using the Setup Display.
Audio Connection (pages 21 to 23)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 70)
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 70)
(page 70)
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 70)
• Set “DIGITAL OUT” to “ON” (page 70)
B
D
A
B-1
C-1
B-2
C-2
D
28
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Press
[/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4
Slowly, insert the disc straight into
the disc slot.
5
Press
H.
The player starts playback (continuous
play). Adjust the volume on the TV or the
amplifier (receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 31. For VIDEO CDs,
see page 32.
play). Adjust the volume on the TV or the
amplifier (receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 31. For VIDEO CDs,
see page 32.
To turn off the player
Press [/1. The player enters standby mode.
When playing 8 cm discs
You can play an 8 cm disc without the need
for an adapter. An adapter may cause a
malfunction.
for an adapter. An adapter may cause a
malfunction.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
“AUTO POWER OFF” in “CUSTOM SETUP” to
“ON” or “OFF” (page 69).
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
“AUTO POWER OFF” in “CUSTOM SETUP” to
“ON” or “OFF” (page 69).
Note
When handling the disc, take care not to touch the
playback side. If the disc becomes dirty, wipe from
the centre out with a soft cloth.
playback side. If the disc becomes dirty, wipe from
the centre out with a soft cloth.
[
/
1
H
H
[
/
1
The labelled side
(non-playback side)
facing up
(non-playback side)
facing up
29
Pl
ay
in
in
g Di
sc
s
Additional operations
* DVD VIDEOs/DVD-RWs/DVD-Rs only
** DVD VIDEOs/DVD-RWs/DVD-Rs/
** DVD VIDEOs/DVD-RWs/DVD-Rs/
DVD+RWs only
***Video and JPEG pictures only (except
BACKGROUND pictures). You can move the
enlarged picture using C/X/x/c. Depending
upon the contents of the disc, the zoom function
may be cancelled automatically when the
picture is moved.
enlarged picture using C/X/x/c. Depending
upon the contents of the disc, the zoom function
may be cancelled automatically when the
picture is moved.
z Hints
• The Instant Replay function is useful when you
• The Instant Replay function is useful when you
want to review a scene or dialogue that you
missed.
missed.
• The Instant Advance function is useful when you
want to pass over a scene that you don’t want to
watch.
watch.
Note
You may not be able to use the Instant Replay or
Instant Advance function with some scenes.
Instant Advance function with some scenes.
Locking the disc slot (Child Lock)
You can lock the disc slot to prevent children
from ejecting the disc.
from ejecting the disc.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “LOCKED” appears
on the front panel display. The
on the front panel display. The
A
and Z
buttons on the player or the remote do not
work while the Child Lock is set.
work while the Child Lock is set.
To unlock the disc slot
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
z Hint
You can insert a disc even when the Child Lock is
set.
You can insert a disc even when the Child Lock is
set.
Note
Even if you select “RESET” under “SETUP” in the
Control Menu (page 66), the disc slot remains
locked.
Control Menu (page 66), the disc slot remains
locked.
To
Operation
Stop
Press x
Pause
Press X
Resume play after
pause
pause
Press X or H
Go to the next chapter,
track, or scene in
continuous play mode
track, or scene in
continuous play mode
Press >
Go back to the
previous chapter,
track, or scene in
continuous play mode
previous chapter,
track, or scene in
continuous play mode
Press .
Stop play and eject the
disc
disc
Press Z
Replay the previous
scene*
scene*
Press
(instant replay) during
playback
(instant replay) during
playback
Briefly fast forward
the current scene**
the current scene**
Press
(instant advance)
during playback
(instant advance)
during playback
Magnify the
image***
image***
Press ZOOM
repeatedly. Press
CLEAR to cancel.
repeatedly. Press
CLEAR to cancel.
Z
CLEAR
.
/
>
X
H
x
(instant advance)
(instant replay)
ZOOM /
ENTER
[/1
O
RETURN
1-7
30
Resuming Playback From
the Point Where You
Stopped the Disc
the Point Where You
Stopped the Disc
(Multi-disc
Resume)
The player stores the point where you stopped
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. If you store a resume playback point for
the seventh disc, the resume playback point
for the first disc is deleted.
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. If you store a resume playback point for
the seventh disc, the resume playback point
for the first disc is deleted.
1
While playing a disc, press
x to
stop playback.
“RESUME” appears on the front panel
display.
display.
2
Press
H.
The player starts playback from the point
where you stopped the disc in step 1.
where you stopped the disc in step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
To play from the beginning of the disc, press x
twice, then press H.
Notes
• “MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 69).
function to work (page 69).
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• For DVD-RWs in VR mode, CDs, and DATA
– you change the settings on the Setup Display.
• For DVD-RWs in VR mode, CDs, and DATA
CDs, the player remembers the resume playback
point for the current disc.
The resume point is cleared when:
point for the current disc.
The resume point is cleared when:
– you eject the disc.
– you disconnect the power cord.
– the player enters standby mode (DATA CD only).
• Resume Play does not work during Shuffle Play
– you disconnect the power cord.
– the player enters standby mode (DATA CD only).
• Resume Play does not work during Shuffle Play
and Programme Play.
• This function may not work with some discs.
• If “MULTI-DISC RESUME” in “CUSTOM
• If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
x
H
31
Pl
ay
in
in
g Di
sc
s
Using the DVD’s Menu
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as language for the sound and
subtitles, select these items using the MENU
button.
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as language for the sound and
subtitles, select these items using the MENU
button.
1
Press TOP MENU or MENU.
The disc’s menu appears on the TV
screen.
The contents of the menu vary from disc
to disc.
screen.
The contents of the menu vary from disc
to disc.
2
Press C/X/x/c or the number
buttons to select the item you want
to play or change.
to play or change.
If you press the number buttons, the
following display appears.
Press the number buttons to select the
item you want.
following display appears.
Press the number buttons to select the
item you want.
3
Press ENTER.
Selecting “ORIGINAL” or
“PLAY LIST” on a DVD-
RW
“PLAY LIST” on a DVD-
RW
Some DVD-RWs in VR (Video Recording)
mode have two types of titles for playback:
originally recorded titles (ORIGINAL) and
titles that can be created on recordable DVD
players for editing (PLAY LIST). You can
select the type of title to be played.
mode have two types of titles for playback:
originally recorded titles (ORIGINAL) and
titles that can be created on recordable DVD
players for editing (PLAY LIST). You can
select the type of title to be played.
1
Press DISPLAY when the player is
in stop mode.
in stop mode.
The Control Menu appears.
2
Press X/x to select
(ORIGINAL/PLAY LIST), then press
ENTER.
ENTER.
The options for “ORIGINAL/PLAY
LIST” appear.
LIST” appear.
3
Press X/x to select a setting.
• PLAY LIST: plays the titles created
from “ORIGINAL” for editing.
• ORIGINAL: plays the titles originally
recorded.
4
Press ENTER.
Number
buttons
buttons
ENTER
TOP MENU
MENU
C
/
X
/
x
/
c
1
ENTER
DISPLAY
X
/
x
1 8 ( 3 4 )
1 2 ( 2 7 )
DVD-RW
PLAY LIST
PLAY LIST
ORIGINAL
T
1 : 3 2 : 5 5
32
Playing VIDEO CDs With
PBC Functions
PBC Functions
(PBC Playback)
PBC (Playback Control) allows you to play
VIDEO CDs interactively by following the
menu on the TV screen.
VIDEO CDs interactively by following the
menu on the TV screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
Press the number buttons to select
the item number you want.
3
Press ENTER.
4
Follow the instructions in the
menu for interactive operations.
Refer to the instructions supplied with the
disc, as the operating procedure may
differ depending on the VIDEO CD.
disc, as the operating procedure may
differ depending on the VIDEO CD.
To return to the menu
Press O RETURN.
z Hint
To play without using PBC, press ./> or the
number buttons while the player is stopped to select
a track, then press H or ENTER.
“Play without PBC” appears on the TV screen and
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press x twice then
press H.
To play without using PBC, press ./> or the
number buttons while the player is stopped to select
a track, then press H or ENTER.
“Play without PBC” appears on the TV screen and
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press x twice then
press H.
Note
Depending on the VIDEO CD, “Press ENTER” in
step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case,
press H.
step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case,
press H.
Number
buttons
buttons
.
/
>
H
x
ENTER
O
RETURN
33
Pl
ay
in
in
g Di
sc
s
Various Play Mode
Functions
Functions
(Programme Play,
Shuffle Play, Repeat Play, A-B Repeat
Play)
You can set the following play modes:
• Programme Play (page 33)
• Shuffle Play (page 34)
• Repeat Play (page 35)
• A-B Repeat Play (page 36)
• Programme Play (page 33)
• Shuffle Play (page 34)
• Repeat Play (page 35)
• A-B Repeat Play (page 36)
Note
The play mode is cancelled when:
– you eject the disc.
– the player enters standby mode by pressing [/1.
– you eject the disc.
– the player enters standby mode by pressing [/1.
Creating your own programme
(Programme Play)
(Programme Play)
You can play the contents of a disc in the
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own programme. You can programme
up to 99 titles, chapters, and tracks.
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own programme. You can programme
up to 99 titles, chapters, and tracks.
1
Press DISPLAY.
The Control Menu appears.
2
Press X/x to select
(PROGRAM), then press ENTER.
(PROGRAM), then press ENTER.
The options for “PROGRAM” appear.
3
Press X/x to select “SET
t
,” then
press ENTER.
4
Press c.
The cursor moves to the title or track row
“T” (in this case, “01”).
“T” (in this case, “01”).
5
Select the title, chapter, or track you
want to programme.
want to programme.
◆ When playing a DVD VIDEO
For example, select chapter “03” of title
“02.”
Press X/x to select “02” under “T,” then
press ENTER.
For example, select chapter “03” of title
“02.”
Press X/x to select “02” under “T,” then
press ENTER.
ENTER
X
/
x
/
c
H
DISPLAY
CLEAR
OFF
OFF
SET
ON
OFF
SET
ON
PLAY
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
DVD VIDEO
PROGRAM
1. TITLE
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
– –
01
02
03
04
05
02
03
04
05
“TRACK” is displayed when you play
a VIDEO CD or CD.
a VIDEO CD or CD.
Titles or tracks
recorded on a disc
recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
C
ALL
01
02
03
04
05
06
02
03
04
05
06
– –
02
03
04
05
03
04
05
01
Chapters recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
C
ALL
03
04
05
06
04
05
06
T
– –
01
02
03
04
05
02
03
04
05
02
01
,
continued
1-8
34
Next, press X/x to select “03” under “C,”
then press ENTER.
then press ENTER.
◆ When playing a VIDEO CD or CD
For example, select track “02.”
Press X/x to select “02” under “T,” then
press ENTER.
For example, select track “02.”
Press X/x to select “02” under “T,” then
press ENTER.
6
To programme other titles, chapters,
or tracks, repeat steps 4 to 5.
or tracks, repeat steps 4 to 5.
The programmed titles, chapters, and
tracks are displayed in the selected order.
tracks are displayed in the selected order.
7
Press
H to start Programme Play.
Programme Play begins.
When the programme ends, you can
restart the same programme again by
pressing H.
When the programme ends, you can
restart the same programme again by
pressing H.
To return to normal play
Press CLEAR, or select “OFF” in step 3. To
play the same programme again, select “ON”
in step 3 and press ENTER.
play the same programme again, select “ON”
in step 3 and press ENTER.
To change or cancel a programme
1
Follow steps 1 to 3 of “Creating your own
programme (Programme Play).”
programme (Programme Play).”
2
Select the programme number of the title,
chapter, or track you want to change or
cancel using X/x and press c.
chapter, or track you want to change or
cancel using X/x and press c.
3
Follow step 5 for new programming. To
cancel a programme, select “--” under
“T,” then press ENTER.
cancel a programme, select “--” under
“T,” then press ENTER.
To cancel all of the titles, chapters, or
tracks in the programmed order
tracks in the programmed order
1
Follow steps 1 to 3 of “Creating your own
programme (Programme Play).”
programme (Programme Play).”
2
Press X and select “ALL CLEAR.”
3
Press ENTER.
z Hint
You can perform Repeat Play or Shuffle Play of
programmed titles, chapters, or tracks. During
Programme Play, follow the steps of Repeat Play
(page 35) or Shuffle Play (page 34).
You can perform Repeat Play or Shuffle Play of
programmed titles, chapters, or tracks. During
Programme Play, follow the steps of Repeat Play
(page 35) or Shuffle Play (page 34).
Note
When you programme tracks on a Super VCD, the
total playing time is not displayed.
total playing time is not displayed.
Playing in random order (Shuffle
Play)
Play)
You can have the player “shuffle” titles,
chapters, or tracks. Subsequent “shuffling”
may produce a different playing order.
chapters, or tracks. Subsequent “shuffling”
may produce a different playing order.
1
Press DISPLAY during playback.
The Control Menu appears.
T
– –
01
02
03
04
05
02
03
04
05
PROGRAM
1. TITLE 0 2 – 0 3
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
Selected title and chapter
PROGRAM
1. TRACK 0 2
ALL CLEAR
2. TRACK
– –
3. TRACK
– –
4. TRACK
– –
5. TRACK
– –
6. TRACK
– –
7. TRACK
– –
0:15:30
– –
01
02
03
04
05
02
03
04
05
T
Selected track
Total time of the programmed tracks
ENTER
X
/
x
H
DISPLAY
CLEAR
35
Pl
ay
in
in
g Di
sc
s
2
Press X/x to select
(SHUFFLE), then press ENTER.
(SHUFFLE), then press ENTER.
The options for “SHUFFLE” appear.
3
Press X/x to select the item to be
shuffled.
shuffled.
◆ When playing a DVD VIDEO
• TITLE
• CHAPTER
◆ When playing a VIDEO CD or CD
• TRACK
◆ When Programme Play is activated
• ON: shuffles titles, chapters, or tracks
• TITLE
• CHAPTER
◆ When playing a VIDEO CD or CD
• TRACK
◆ When Programme Play is activated
• ON: shuffles titles, chapters, or tracks
selected in Programme Play.
4
Press ENTER.
Shuffle Play starts.
To return to normal play
Press CLEAR, or select “OFF” in step 3.
z Hints
• You can set Shuffle Play while the player is
• You can set Shuffle Play while the player is
stopped. After selecting the “SHUFFLE” option,
press H. Shuffle Play starts.
press H. Shuffle Play starts.
• Up to 200 chapters in a disc can be played in
random order when “CHAPTER” is selected.
Note
You cannot use this function with VIDEO CDs or
Super VCDs with PBC playback.
Super VCDs with PBC playback.
Playing repeatedly (Repeat Play)
You can play all of the titles or tracks on a
disc, or a single title, chapter, or track
repeatedly.
You can use a combination of Shuffle or
Programme Play modes.
disc, or a single title, chapter, or track
repeatedly.
You can use a combination of Shuffle or
Programme Play modes.
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(REPEAT), then press ENTER.
The options for “REPEAT” appear.
◆ When playing a DVD VIDEO
• DISC: repeats all of the titles.
• TITLE: repeats the current title on a
• DISC: repeats all of the titles.
• TITLE: repeats the current title on a
disc.
• CHAPTER: repeats the current chapter.
◆ When playing a DVD-RW
• DISC: repeats all the titles of the
◆ When playing a DVD-RW
• DISC: repeats all the titles of the
selected type.
• TITLE: repeats the current title on a
disc.
• CHAPTER: repeats the current chapter.
PLAY
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
OFF
CHAPTER
TITLE
OFF
DVD VIDEO
ENTER
X
/
x
H
DISPLAY
CLEAR
PLAY
1 ( 2 8 )
1 ( 1 2 )
T
0 : 0 0 : 0 2
OFF
OFF
DISC
TITLE
CHAPTER
OFF
DISC
TITLE
CHAPTER
DVD VIDEO
,
continued
36
◆ When playing a VIDEO CD or CD
• DISC: repeats all of the tracks.
• TRACK: repeats the current track.
◆ When playing a DATA CD with MP3
audio tracks or JPEG image files
• DISC: repeats all of the albums.
• ALBUM: repeats the current album.
• TRACK (MP3 audio tracks only):
• DISC: repeats all of the tracks.
• TRACK: repeats the current track.
◆ When playing a DATA CD with MP3
audio tracks or JPEG image files
• DISC: repeats all of the albums.
• ALBUM: repeats the current album.
• TRACK (MP3 audio tracks only):
repeats the current track.
◆ When Programme Play or Shuffle Play
is activated
• ON: repeats Programme Play or Shuffle
is activated
• ON: repeats Programme Play or Shuffle
Play.
3
Press X/x to select a setting, and
press ENTER.
press ENTER.
To return to normal play
Press CLEAR, or select “OFF” in step 2.
z Hint
You can set Repeat Play while the player is stopped.
After selecting the “REPEAT” option, press H.
Repeat Play starts.
You can set Repeat Play while the player is stopped.
After selecting the “REPEAT” option, press H.
Repeat Play starts.
Notes
• You cannot use this function with VIDEO CDs or
Super VCDs with PBC playback.
• When repeating a DATA CD which contains MP3
audio tracks and JPEG image files, and their
playing times are not the same, the sound will not
match the image.
playing times are not the same, the sound will not
match the image.
• When “MODE (MP3, JPEG)” is set to “IMAGE
(JPEG)” (page 56), you cannot select “TRACK.”
Repeating a specific portion (A-
B Repeat Play)
B Repeat Play)
You can play a specific portion of a title,
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics,
etc.)
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics,
etc.)
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(A-B
REPEAT), then press ENTER.
The options for “A-B REPEAT” appear.
3
Press X/x to select “SET t,” then
press ENTER.
press ENTER.
The “A-B REPEAT” setting bar appears.
ENTER
X
/
x
DISPLAY
CLEAR
PLAY
SET
OFF
OFF
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
DVD VIDEO
A 18 - 1:32:30
B
37
Pl
ay
in
in
g Di
sc
s
4
During playback, when you find the
starting point (point A) of the portion to
be played repeatedly, press ENTER.
starting point (point A) of the portion to
be played repeatedly, press ENTER.
The starting point (point A) is set.
5
When you reach the ending point
(point B), press ENTER again.
(point B), press ENTER again.
The set points are displayed and the
player starts repeating this specific
portion.
player starts repeating this specific
portion.
To return to normal play
Press CLEAR, or select “OFF” in step 3.
Notes
• When you set A-B Repeat Play, the settings for
Shuffle Play, Repeat Play, and Programme Play
are cancelled.
are cancelled.
• A-B Repeat Play does not work across multiple
titles.
A 18 - 1:32:55
B 18 - 1:33:05
A 18 - 1:32:55
B 18 - 1:34:30
1-9
38
Searching for a Scene
Searching for a
Particular Point on a
Disc
Particular Point on a
Disc
(Search, Scan, Slow-motion
Play, Freeze Frame)
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
disc by monitoring the picture or playing back
slowly.
Notes
• Depending on the DVD/VIDEO CD, you may not
be able to do some of the operations described.
• For DATA CDs, you can search for a particular
point only on an MP3 audio track.
Locating a point quickly using
the previous/next buttons
the previous/next buttons
You can search for the next or previous
chapter, track, or scene using ./> on
the player.
During playback, press > or . once
briefly to go to the next or previous chapter/
track/scene. Or, press and hold > or .
to search forward or backwards, and release
the button when you find the point you want
to return to normal playback. (Search)
chapter, track, or scene using ./> on
the player.
During playback, press > or . once
briefly to go to the next or previous chapter/
track/scene. Or, press and hold > or .
to search forward or backwards, and release
the button when you find the point you want
to return to normal playback. (Search)
Locating a point quickly by
playing a disc in fast forward or
fast reverse (Scan)
playing a disc in fast forward or
fast reverse (Scan)
Press
m or M
while playing a
disc. When you find the point you want, press
H to return to normal speed. Each time you
press
press
m or M
during scan, the
scan speed changes. With each press the
indication changes as shown below. Actual
speeds may differ between discs.
indication changes as shown below. Actual
speeds may differ between discs.
Playback direction
Opposite direction
The “u2B”/ “u2b” playback speed is about
twice the normal speed.
The “3M”/“3m” playback speed is faster
than “2M”/“2m” and the “2M”/“2m”
playback speed is faster than “1M”/
“1m.”
twice the normal speed.
The “3M”/“3m” playback speed is faster
than “2M”/“2m” and the “2M”/“2m”
playback speed is faster than “1M”/
“1m.”
m
/
M
H
(step)
(step)
H
./>
u
2
B t
1
M t
2
M t
3
M
3
M
(DVD VIDEO/DVD-RW/VIDEO CD only)
u
2
B
(DVD VIDEO/CD only)
u
2
b t
1
m t
2
m t
3
m
3
m
(DVD VIDEO/DVD-RW/VIDEO CD only)
u
2
b
(DVD VIDEO only)
39
S
earc
hi
ng f
o
r a Sce
ne
Watching frame by frame
(Slow-motion play)
(Slow-motion play)
Press
m or M
when the player is
in pause mode. To return to normal speed,
press H.
Each time you press
press H.
Each time you press
m or M
during Slow-motion play, the playback speed
changes. Two speeds are available. With each
press the indication changes as follows:
changes. Two speeds are available. With each
press the indication changes as follows:
Playback direction
2
y 1
Opposite direction (DVD only)
2
y 1
The “2 y”/“2
” playback speed is slower
than “1 y”/“1 .”
Playing one frame at a time
(Freeze Frame)
(Freeze Frame)
When the player is in the pause mode, press
(step) to go to the next frame. Press
(step) to go to the preceding frame
(DVD only). To return to normal playback,
press H.
press H.
Note
You cannot search for a still picture on a DVD-RW
in VR mode.
in VR mode.
Searching for a Title/
Chapter/Track/Scene,
etc.
Chapter/Track/Scene,
etc.
You can search a DVD by title or chapter, and
you can search a VIDEO CD/CD/DATA CD
by track, index, or scene. As titles and tracks
are assigned unique numbers on the disc, you
can select the desired one by entering its
number. You can also search for a scene using
the time code.
you can search a VIDEO CD/CD/DATA CD
by track, index, or scene. As titles and tracks
are assigned unique numbers on the disc, you
can select the desired one by entering its
number. You can also search for a scene using
the time code.
1
Press DISPLAY (When playing a
DATA CD with JPEG image files,
press twice).
press twice).
The Control Menu appears.
2
Press X/x to select a search
method.
◆ When playing a DVD VIDEO/DVD-RW
TITLE
CHAPTER
TIME/TEXT
CHAPTER
TIME/TEXT
Select “TIME/TEXT” to search for a
starting point by inputting the time code.
◆ When playing a VIDEO CD or Super
VCD without PBC playback
starting point by inputting the time code.
◆ When playing a VIDEO CD or Super
VCD without PBC playback
TRACK
INDEX
INDEX
Number
buttons
buttons
CLEAR
DISPLAY
X
/
x
ENTER
,
continued
40
◆ When playing a VIDEO CD or Super
VCD with PBC Playback
VCD with PBC Playback
SCENE
◆ When playing a CD
TRACK
◆ When playing a DATA CD (MP3 audio)
ALBUM
TRACK
TRACK
◆ When playing a DATA CD (JPEG file)
ALBUM
FILE
FILE
Example: when you select
CHAPTER
“** (**)” is selected (** refers to a
“** (**)” is selected (** refers to a
number).
The number in parentheses indicates the
total number of titles, chapters, tracks,
indexes, or scenes.
The number in parentheses indicates the
total number of titles, chapters, tracks,
indexes, or scenes.
3
Press ENTER.
“** (**)” changes to “-- (**).”
4
Press the number buttons to select
the title, chapter, track, index, or
scene number you want to search.
◆ If you make a mistake
Cancel the number by pressing CLEAR,
then select another number.
Cancel the number by pressing CLEAR,
then select another number.
5
Press ENTER.
The player starts playback from the
selected number.
selected number.
To search for a scene using the time code
(DVD VIDEO/DVD-RW only)
(DVD VIDEO/DVD-RW only)
1
In step 2, select
TIME/TEXT.
“T **:**:**” (playing time of the current
title) is selected.
2
Press ENTER.
“T **:**:**” changes to “T --:--:--.”
“T **:**:**” changes to “T --:--:--.”
3
Input the time code using the number
buttons, then press ENTER.
For example, to find the scene at 2 hours,
10 minutes, and 20 seconds after the
beginning, just enter “2:10:20.”
buttons, then press ENTER.
For example, to find the scene at 2 hours,
10 minutes, and 20 seconds after the
beginning, just enter “2:10:20.”
z Hints
• When the Control Menu display is turned off, you
• When the Control Menu display is turned off, you
can search for a chapter (DVD VIDEO/DVD-
RW) or track (CD) by pressing the number
buttons and ENTER.
RW) or track (CD) by pressing the number
buttons and ENTER.
• You can display the first scene of titles, chapters,
or tracks recorded on the disc on a screen divided
into 9 sections. You can start playback directly by
selecting one of the scenes. For details, see
“Searching by Scene (PICTURE
NAVIGATION)” on the next page.
into 9 sections. You can start playback directly by
selecting one of the scenes. For details, see
“Searching by Scene (PICTURE
NAVIGATION)” on the next page.
Notes
• The title, chapter, or track number displayed is the
same number recorded on the disc.
• You cannot search for a scene on a DVD+RW
using the time code.
PLAY
1 8 ( 3 4 )
1 2 ( 2 7 )
DVD VIDEO
T
1 : 3 2 : 5 5
Selected row
PLAY
DVD VIDEO
DVD VIDEO
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
( 3 4 )
41
S
earc
hi
ng f
o
r a Sce
ne
Searching by Scene
(PICTURE NAVIGATION)
You can divide the screen into 9 subscreens
and find the desired scene quickly.
and find the desired scene quickly.
1
Press PICTURE NAVI during
playback.
The following display appears.
2
Press PICTURE NAVI repeatedly to
select an item.
select an item.
• CHAPTER VIEWER (DVD VIDEO
only): displays the first scene of each
chapter.
chapter.
• TITLE VIEWER (DVD VIDEO only):
displays the first scene of each title.
• TRACK VIEWER (VIDEO CD/
Super VCD only): displays the first
scene of each track.
scene of each track.
3
Press ENTER.
The first scene of each chapter, title, or
track appears as follows.
track appears as follows.
4
Press C/X/x/c to select a chapter,
title, or track, and press ENTER.
title, or track, and press ENTER.
Playback starts from the selected scene.
To return to normal play during setting
Press O RETURN.
z Hint
If there are more than 9 chapters, titles, or tracks, V
is displayed at the bottom right of the screen.
To display the additional chapters, titles, or tracks,
select the bottom scenes and press x. To return to
the previous scene, select the top scenes and press
X
If there are more than 9 chapters, titles, or tracks, V
is displayed at the bottom right of the screen.
To display the additional chapters, titles, or tracks,
select the bottom scenes and press x. To return to
the previous scene, select the top scenes and press
X
.
Note
Depending on the disc, you may not be able to select
some items.
some items.
PICTURE
NAVI
NAVI
ENTER
O
RETURN
C
/
X
/
x
/
c
CHAPTER VIEWER
ENTER
1
4
7
2
5
8
3
6
9
Click on the first or last page to see other DVP-LS755P service manuals if exist.