Sony DVP-K68P Service Manual ▷ View online
1-17
DVP-K68P
1-17E
67
Additional Information
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function is activated
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen and the front panel
display. In this case, check the following
table.
to prevent the player from malfunctioning, a
five-character service number (e.g., C 13 50)
with a combination of a letter and four digits
appears on the screen and the front panel
display. In this case, check the following
table.
First three
characters of
the service
number
characters of
the service
number
Cause and/or corrective
action
action
C 13
The disc is dirty or recorded
in a format that this player
cannot play (page 6).
in a format that this player
cannot play (page 6).
,Clean the disc with a
cleaning cloth or check its
format.
format.
C 31
The disc is not inserted
correctly.
correctly.
,Re-insert the disc
correctly.
E XX
(xx is a number)
To prevent a malfunction, the
player has performed the
self-diagnosis function.
player has performed the
self-diagnosis function.
,Contact your nearest
Sony dealer or local
authorized Sony service
facility and give the 5-
character service number.
Example: E 61 10
authorized Sony service
facility and give the 5-
character service number.
Example: E 61 10
C:13:50
68
Specifications
System
Laser: Semiconductor laser
Laser: Semiconductor laser
Outputs and Input
(Jack name: Jack type/Output level/Load
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT (AUDIO):
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/–18 dBm (wave
length 660 nm)
length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, P
B
/C
B
,
P
R
/C
R
):
Phono jack/Y: 1.0 Vp-p, P
B
/C
B
, P
R
/ C
R
:
0.7 Vp-p/75 ohms
LINE OUT (VIDEO):
Phono jack/1.0 Vp-p/75 ohms
MIC Input: Phone jack
General
Power requirements:
Power requirements:
110 – 240 V AC, 50/60 Hz
Power consumption: 10 W
Dimensions (approx.):
Dimensions (approx.):
430
× 43 × 213.4 mm (width/height/
depth) incl. projecting parts
Mass (approx.): 1.7 kg
Operating temperature: 5
Operating temperature: 5
°C to 35 °C
Operating humidity: 25 % to 80 %
Supplied accessories
See page 14.
See page 14.
Specifications and design are subject to
change without notice.
change without notice.
2-1
DVP-K68P
Note: Follow the disassembly procedure in the numerical order given.
2-1. UPPER CASE
SECTION 2
DISASSEMBLY
2-2. FRONT PANEL ASSEMBLY and MC-192 BOARD
4
Two Tapping Screws
6
Upper case
3
Tray Cover
5
Three Tapping Screws
2
1
Chassis Back
1
6
Claw
3
Claw
4
Claw
5
Claw
7
Front Panel Assembly
a
a
8
Two Screws
+BVTP 2.6 (3CR)
1
One Screw
+BV3
(3-CR)
2
Board in Harnes
MC-091
q;
MC-192 board
9
Bracket
2-2
DVP-K68P
2-3. LOADING ASSEMBLY
b
a
b
6
Three Screws
+BV3
(3-CR)
7
Loading Assembly
5
PM-136 Harness
(CN201,
10P)
1
FMO-013 Flat Flexible Cable (CN101, 24P)
3
FMS-015 Flat Flexible Cable (CN202, 5P)
4
PM-136 Harness (CN501, 10P)
2
MD-119 Harness (CN201, 6P)
a
2-3
DVP-K68P
2-4. OPTICAL PICK-UP
(DEVICE, OPTICAL KHM-313CAA/C2RP)
Caution Point on the Laser Diode:
Laser Diode in the optical Device is very sensitive to Surge Current
or ElectroStatic Discharge (ESD):
Laser Diode in the optical Device is very sensitive to Surge Current
or ElectroStatic Discharge (ESD):
After take-out FMO-013 Flat Flexible Cable from CN101 of
MV-57 board immediately ground FMO-013 Flat Flexible Cable
pattern using short clip. Metal paper clip can be used as short
clip.
MV-57 board immediately ground FMO-013 Flat Flexible Cable
pattern using short clip. Metal paper clip can be used as short
clip.
5
FMO-013 Flat Flexible Cable (CN101, 24P)
4
MD-119 Harness (CN201, 6P)
1
Four Insulator Screws
6
Two Insulator
6
Two Insulator
3
Optical Device
(KHM-313CAA/C2RP)
2
FFC Holder
Shortland Position
Note:
Solder shortland before remove the
FMO-013 Flat Flexible Cable from
24 pin BU connector.
FMO-013 Flat Flexible Cable from
24 pin BU connector.
Note :
The components identified by mark or
dotted line with mark are critical for
safety.
Replace only with part number specified.
The components identified by mark or
dotted line with mark are critical for
safety.
Replace only with part number specified.
Click on the first or last page to see other DVP-K68P service manuals if exist.