DOWNLOAD Sony DVP-K370 Service Manual ↓ Size: 12.92 MB | Pages: 85 in PDF or view online for FREE

Model
DVP-K370
Pages
85
Size
12.92 MB
Type
PDF
Document
Service Manual
Brand
Device
DVD / BRAZIL
File
dvp-k370.pdf
Date

Sony DVP-K370 Service Manual ▷ View online

MANUAL DE SERVIÇO
CD/DVD PLAYER
SPECIFICATIONS
DVP-K370
RMT-D145B
E
Brazilian Model
System
Laser: Semiconductor laser
Signal format system: NTSC/PAL (See 
page 1-4
 
 to switch)
Audio characteristics
Frequency response: DVD VIDEO (PCM 
96 kHz): 2 Hz to 44 kHz (
±1.0 dB)/DVD 
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz 
(
±0.5 dB)/CD:  2 Hz  to  20 kHz  (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB 
(LINE OUT L/R (AUDIO) 1/2 jacks 
only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD: 
99 dB
Wow and flutter: Less than detected value 
(
±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO) 
1/2 jacks are measured. When you play PCM 
sound tracks with a 96 kHz sampling 
frequency, the output signals from the 
DIGITAL OUT (OPTICAL or COAXIAL) 
jack are converted to 48 kHz sampling 
frequency.
Outputs and Input
(Jack name: Jack type/Output level/Load 
impedance)
LINE OUT (AUDIO) 1/2: Phono jack/
2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL): Optical 
output jack/–18 dBm  (wave length: 
660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT(Y, C
B
, C
R
): 
Phono jack/Y: 1.0 Vp-p, C
B
, C
R
0.7 Vp-p/75 ohms
LINE OUT (VIDEO) 1/2: Phono jack/
1.0 Vp-p/75 ohms
S VIDEO OUT: 4-pin mini DIN/Y: 
1.0 Vp-p, C: 0.3 Vp-p (PAL), 0.286 Vp-p 
(NTSC)/75 ohms
MIC: Phone jack
General
Power requirements: 
220 – 240 V AC, 50/60 Hz
110 V AC, 60 Hz
See page 1-1 for further information.
Power consumption: 11 W/13 W
See page 1-1 for further information.
Dimensions (approx.): 430 
×  74 ×  260 mm 
(width/height/depth) incl. projecting 
parts
Mass (approx.): 2.5 kg
Operating temperature: 5
° C to 35 ° C
Operating humidity: 25 % to 80 %
Supplied accessories
See page 1-3.
Specifications and design are subject to 
change without notice.
Photo : DVP-K370
Ver. 1.1  07.2003
Inclusões de códigos das peças
Páginas  8-1 e 8-2
9-890-237-01
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0
 OR DOTTED LINE WITH
MARK 
0
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH
THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO
CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE
FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE
OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
 3 
TABLE OF CONTENTS
SERVICE NOTE
1.
DISC REMOVAL PROCEDURE (at POWER OFF) ········ 5
2.
HOW TO SERVICE MB-103 BOARD ······························ 5
3.
CONNECTION OF SERVICE JIG ···································· 7
1.
GENERAL
WARNING ············································································ 1-1
Welcome! ··············································································· 1-1
Precautions ············································································· 1-1
About this Manual ································································· 1-1
This Player Can Play the Following Discs ···························· 1-1
Notes about the Discs ···························································· 1-1
Index to Parts and Controls ···················································· 1-2
Guide to the Control Menu Display ······································· 1-3
Simple Start Guide ···································································· 1-3
Quick Overview ····································································· 1-3
Step 1: Unpacking ································································· 1-3
Step 2: Inserting Batteries into the Remote ··························· 1-3
Step 3: TV Hookups ······························································ 1-4
Step 4: Playing a Disc ···························································· 1-4
Hookups ····················································································· 1-4
Hooking Up the Player ·························································· 1-4
Step 1: Connecting the Video Cords ······································ 1-4
Step 2: Connecting the Audio Cords ····································· 1-5
Step 3: Connecting the Power Cord ······································· 1-6
Step 4: Quick Setup ······························································· 1-6
Playing Discs ············································································· 1-7
Playing Discs ········································································· 1-7
Searching for a Particular Point on a Disc
   (Search, Scan, Slow-motion Play, Freeze Frame) ·············· 1-7
Resuming Playback from the Point Where You Stopped the
   Disc (Multi-disc Resume) ··················································· 1-7
Using the DVD’s Menu ························································· 1-8
Playing VIDEO CDs with PBC Functions (PBC Playback) ·· 1-8
Playing an MP3 Audio Track ················································· 1-8
Various Play Mode Functions (Programme Play, Shuffle Play,
   Repeat Play, A-B Repeat Play) ··········································· 1-8
Searching for a Scene ······························································ 1-10
Searching for a Title/Chapter/Track/Index/Scene
   (Search mode) ··································································· 1-10
Searching by Scene (PICTURE NAVIGATION) ················ 1-10
Enjoying Karaoke ···································································· 1-10
Using Karaoke ····································································· 1-10
Selecting the Vocals (Vocal Select) ······································ 1-11
Viewing Information About the Disc ······································· 1-11
Checking the Playing Time and Remaining Time ··············· 1-11
Checking the Play Information ············································ 1-12
Sound Adjustments ·································································· 1-12
Changing the Sound ····························································· 1-12
TV Virtual Surround Settings (TVS) ··································· 1-12
Enjoying Movies ····································································· 1-13
Changing the Angles ···························································· 1-13
Displaying the Subtitles ······················································· 1-13
Adjusting the Picture Quality (BNR) ·································· 1-13
Adjusting the Playback Picture (CUSTOM PICTURE MODE) ·· 1-13
Enhancing the Playback Picture (DIGITAL VIDEO
   ENHANCER) ··································································· 1-14
Using Various Additional Functions ········································ 1-14
Locking Discs (CUSTOM PARENTAL CONTROL,
   PARENTAL CONTROL) ················································· 1-14
Controlling Your TV or AV Amplifier (Receiver) with the
   Supplied Remote ······························································· 1-15
Settings and Adjustments ························································ 1-16
Using the Setup Display ······················································ 1-16
Setting the Display or Sound Track Language
   (LANGUAGE SETUP) ···················································· 1-16
Settings for the Display (SCREEN SETUP) ······················· 1-16
Custom Settings (CUSTOM SETUP) ································· 1-16
Settings for the Sound (AUDIO SETUP) ···························· 1-17
Additional Information ···························································· 1-17
Troubleshooting ··································································· 1-17
Self-diagnosis Function (When letters/numbers appear in the
   display) ············································································· 1-18
Glossary ··············································································· 1-18
Language Code List ····························································· 1-18
2.
DISASSEMBLY
2-1.
CASE, TRAY COVER ASSEMBLY ······························ 2-2
2-2.
FRONT PANEL ASSEMBLY ········································· 2-2
2-3.
MECHANISM DECK ····················································· 2-3
2-4.
OPTICAL PICK-UP (KHM-270AAA) ··························· 2-3
2-5.
DC-MOTOR, MS-81T BOARD ····································· 2-4
2-6.
MB-103KM (GA) BOARD ············································· 2-4
2-7.
AV-63KM (GA) BOARD ················································ 2-5
2-8.
POWER BLOCK ····························································· 2-5
2-9.
IF-092KM (GA) BOARD ··············································· 2-6
2-10. MC-139 BOARD ····························································· 2-6
2-11. INTERNAL VIEWS ························································ 2-7
2-12. CIRCUIT BOARDS LOCATION ··································· 2-8
3.
BLOCK DIAGRAMS
3-1.
OVERALL BLOCK DIAGRAM ···································· 3-1
3-2.
RF/SERVO BLOCK DIAGRAM ···································· 3-3
3-3.
SIGNAL PROCESSOR BLOCK DIAGRAM ················ 3-5
3-4.
SYSTEM CONTROL BLOCK DIAGRAM ··················· 3-7
3-5.
VIDEO BLOCK DIAGRAM ·········································· 3-9
3-6.
AUDIO BLOCK DIAGRAM ········································ 3-11
3-7.
INTERFACE CONTROL BLOCK DIAGRAM ··········· 3-13
3-8.
POWER BLOCK DIAGRAM (1/3) ······························ 3-15
3-10. POWER BLOCK DIAGRAM (3/3) ······························ 3-19
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
FRAME SCHEMATIC DIAGRAM ································ 4-1
4-2.
PRINTED WIRING BOARDS AND SCHEMATIC
DIAGRAM ······································································ 4-4
• MS-81 (LOADING)
PRINTED WIRING BOARD AND
SCHEMATIC DIAGRAM ······························ 4-5
• MB-103 (DVD/CD RF AMP, DIGITAL SERVO,
MOTOR DRIVE, SERVO, AV DECODER, SDRAM,
SYSTEM CONTROL, AUDIO DAC, PLL)
PRINTED WIRING BOARD ························· 4-7
• MB-103 (DVD/CD RF AMP, DIGITAL SERVO) (1/7)
SCHEMATIC DIAGRAM ···························· 4-11
• MB-103 (MOTOR DRIVE) (2/7)
SCHEMATIC DIAGRAM ···························· 4-13
• MB-103 (SERVO) (3/7)
SCHEMATIC DIAGRAM ···························· 4-15
• MB-103 (AV DECODER) (4/7)
SCHEMATIC DIAGRAM ···························· 4-17
• MB-103 (SDRAM) (5/7)
SCHEMATIC DIAGRAM ···························· 4-19
• MB-103 (SYSTEM CONTROL) (6/7)
SCHEMATIC DIAGRAM ···························· 4-21
• MB-103 (AUDIO DAC, PLL) (7/7)
SCHEMATIC DIAGRAM ···························· 4-23
• AV-063 (AUDIO OUT, VIDEO OUT)
PRINTED WIRING BOARD ······················· 4-25
• AV-063 (AUDIO OUT) (1/2)
SCHEMATIC DIAGRAM ···························· 4-27
• AV-063 (VIDEO OUT) (2/2)
SCHEMATIC DIAGRAM ···························· 4-29
 4 
• IF-092 (IF COM)
PRINTED WIRING BOARD ······················· 4-31
• IF-092 (IF COM)
SCHEMATIC DIAGRAM ···························· 4-33
• MC-139 (MIC AMP)
PRINTED WIRING BOARD ······················· 4-35
• MC-139 (MIC AMP)
SCHEMATIC DIAGRAM ···························· 4-37
• HS11S1F (SWITCHING REGULATOR)
PRINTED WIRING BOARD ······················· 4-41
• HS11S1F (SWITCHING REGULATOR)
SCHEMATIC DIAGRAM ···························· 4-45
5.
IC PIN FUNCTION DESCRIPTION
5-1.
SYSTEM CONTROL PIN FUNCTION
(MB-103 BOARD IC104: MB91307RPFV-G-BND-E1) · 5-1
6.
TEST MODE
6-1.
GENERAL DESCRIPTION ··········································· 6-1
6-2.
STARTING TEST MODE ··············································· 6-1
6-3.
SYSCON DIAGNOSIS ··················································· 6-1
6-4.
DRIVE AUTO ADJUSTMENT ······································ 6-5
6-5.
DRIVE MANUAL OPERATION ··································· 6-7
6-6.
MECHA AGING ··························································· 6-11
6-7.
EMERGENCY HISTORY ············································ 6-11
6-8.
VERSION INFORMATION ········································· 6-11
6-9.
VIDEO LEVEL ADJUSTMENT ·································· 6-11
6-10. IF CON SELF DIAGNOSTIC FUNCTION ················· 6-12
6-11. TROUBLESHOOTING ················································ 6-18
7.
ELECTRICAL ADJUSTMENT
7-1.
POWER SUPPLY CHECK ············································· 7-1
7-2.
ADJUSTMENT OF VIDEO SYSTEM ··························· 7-2
1.
Video Level Adjustment (MB-103 BOARD) ·················· 7-2
2.
Checking S Video Output S-Y ········································· 7-2
3.
Checking S Video Output S-C ········································· 7-2
4.
Checking Component Video Output Y ···························· 7-2
5.
Checking Component Video Output B-Y ························ 7-3
6.
Checking Component Video Output R-Y ························ 7-3
7-3.
ADJUSTMENT RELATED PARTS ARRANGEMENT · 7-4
8.
REPAIR PARTS LIST
8-1.
EXPLODED VIEWS ······················································ 8-1
8-1-1. FRONT PANEL ASSEMBLY ········································· 8-1
8-1-2. CHASSIS ASSEMBLY ··················································· 8-2
8-1-3. MECHANISM DECK ASSEMBLY ······························· 8-3
8-2.
ELECTRICAL PARTS LIST ·········································· 8-4
Page of 85
Display

Sony DVP-K370 Service Manual ▷ Download

  • DOWNLOAD Sony DVP-K370 Service Manual ↓ Size: 12.92 MB | Pages: 85 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DVP-K370 in PDF for free, which will help you to disassemble, recover, fix and repair Sony DVP-K370 DVD. Information contained in Sony DVP-K370 Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.