Sony DVP-FX96 / DVP-FX970 / DVP-FX975 Service Manual ▷ View online
DVP-FX96/FX970/FX970WM/FX975
4-4E
SECTION 5
IC PIN FUNCTION DESCRIPTION
5-1. SERVO & DSP & MPEG IC (MAIN BOARD)
DVP-FX96/FX970/FX970WM/FX975
5-1
DVP-FX96/FX970/FX970WM/FX975
5-2E
SECTION 6
ELECTRICAL ADJUSTMENT
This section describes procedures and instructions necessary for adjusting electrical circuits in this set.
Instruments required:
1) Color monitor TV
2) Oscilloscope 1 or 2 phenomena, band width over 100 MHz, with delay mode
3) Frequency counter (over 8 digits)
4) Digital voltmeter
5) Standard commander (RMT-D195)
6) DVD reference disc
HLX-504 (J-6090-088-A) (single layer) (NTSC)
HLX-505 (J-6090-089-A) (dual layer) (NTSC)
1. Checking Video Output Level
<Purpose>
This checks whether video output level satisfy the NTSC standard. If it is not correct, the brightness will be too large or small.
Mode
Play
Signal
Check the color-bar (100%) signal on DVD
reference disc
Measurement Point
LINE OUT (VIDEO) connector
(75 Ω terminated)
Measuring Instrument
Oscilloscope
Specification
1.00 ± 0.05 Vp-p
Checking method:
1) Confirm that the video output level is 1.00 ± 0.05 Vp-p.
6-1. STANDARD VIDEO LEVEL
DVP-FX96/FX970/FX970WM/FX975
6-1E
1±0.05V
P-P
1±0.05V
P-P
Click on the first or last page to see other DVP-FX96 / DVP-FX970 / DVP-FX975 service manuals if exist.