DOWNLOAD Sony DVP-F5 / DVP-FX1 Service Manual ↓ Size: 23.56 MB | Pages: 122 in PDF or view online for FREE

Model
DVP-F5 DVP-FX1
Pages
122
Size
23.56 MB
Type
PDF
Document
Service Manual
Brand
Device
DVD
File
dvp-f5-dvp-fx1.pdf
Date

Sony DVP-F5 / DVP-FX1 Service Manual ▷ View online

— 5 —
6.
TEST MODE
6-1.
GENERAL DESCRIPTION ··········································· 6-1
6-2.
STARTING TEST MODE ··············································· 6-1
6-3.
SYSCON DIAGNOSIS ··················································· 6-1
6-4.
DRIVE AUTO ADJUSTMENT ······································ 6-5
6-5.
DRIVE MANUAL OPERATION ··································· 6-7
6-6.
EVR ADJUSTMENT ······················································ 6-9
6-7.
EMERGENCY HISTORY ············································ 6-11
6-8.
VERSION INFORMATION ········································· 6-12
6-9.
VIDEO LEVEL ADJUSTMENT ·································· 6-12
6-10. SELF-DIAGNOSIS OF IF CONTROLLER ················· 6-12
7.
ELECTRICAL ADJUSTMENT
7-1.
POWER SUPPLY BLOCK (TP-61 BOARD) ················· 7-1
7-2.
SYSTEM CONTROL ADJUSTMENT
(TP-61 BOARD) ····························································· 7-2
7-3.
VIDEO SYSTEM ADJUSTMENT ································· 7-2
7-4.
ARRANGEMENT DIAGRAM FOR ADJUSTMENT
PARTS ············································································· 7-4
8.
REPAIR PARTS LIST
8-1.
EXPLODED VIEWS ······················································ 8-1
8-2.
ELECTRICAL PARTS LIST ·········································· 8-7
— 6 —
SERVICE NOTES
1. REPLACING OPTICAL PICK-UP
1-1.
Handling
1)
A red laser diode for DVD requires more attention to static
electricity than general infrared laser diodes for CD.
Because its durability to static electricity is far weaker than
that of infrared laser diodes, always use an earth band when
handling the optical pick-up block as service parts.
2)
The optical pick-up of the DVP-F5/FX1 cannot be replaced as
a single part.  It is supplied as the MD COMPLE (DVDM-
FX1).
Note: When the MD COMPLE is going to be replaced, be very
careful not to damage the flexible board to peel off the
flexible board because the flexible board is attached
underneath the cabinet by the double-sided adhesive tape.
3)
When handling the MD COMPLE (DVDM-FX1), be careful
not to touch the portions specified in the illustration of the MD
COMPLE with hand.  Be sure to hold the hatched portions
described as “HOLD” in the illustration.
1-2.
Connection of the DM flexible extension
board (J-6090-101-A) for service
For any attempt is going to be made to inspect, check and adjust
the MB-90 board, connect the DM flexible extension board as
shown below.
MD COMPLE
( DVDM-FX1)
SLED-CN
OP-CN
SPDL-CN
7-pin fle
xib
le board (194mm)
18-pin fle
xib
le 
board 
(114mm)
10-pin fle
xible board 
(114mm)
MB-90 board
CN802 (16 pin)
CN801 (18 pin)
CN804 (10 pin)
CN803 
(7 pin)
16-pin fle
xib
le board (114mm)
Hold 
position
Hold position
Hold position
Lens actuator 
covers
Double-sided 
adhesive tape
From
spindle motor
From optical 
block pick-up
Objective lens
Turntable 
(spindle motor)
From 
sled motor
Flexible board
— 7 —
SELF DIAGNOSIS
MEMO
— 8 —
Page of 122
Display

Click on the first or last page to see other DVP-F5 / DVP-FX1 service manuals if exist.