DOWNLOAD Sony DVP-F25 Service Manual ↓ Size: 16.4 MB | Pages: 91 in PDF or view online for FREE

Model
DVP-F25
Pages
91
Size
16.4 MB
Type
PDF
Document
Service Manual
Brand
Device
DVD
File
dvp-f25.pdf
Date

Sony DVP-F25 Service Manual ▷ View online

1-17
68
◆ MPEG (DVD only)
Selects the type of MPEG audio signal.
◆ DTS (DVD only)
Selects whether or not to output DTS signal.
Note
When you use the DIGITAL OUT (OPTICAL) jack 
to listen to MPEG audio signals and set “MPEG” to 
“MPEG” in “AUDIO SETUP,” no sound will come 
from your speakers if you select one of the TVS 
modes.
PCM
Select this when the player is 
connected to an audio 
component lacking a built-in 
MPEG decoder. If you play 
MPEG audio sound tracks, the 
player outputs stereo signals 
via the DIGITAL OUT 
(OPTICAL) jack.
MPEG
Select this when the player is 
connected to an audio 
component with a built-in 
MPEG decoder.
OFF
Select this when the player is 
connected to an audio 
component lacking a built-in 
DTS decoder.
ON
Select this when the player is 
connected to an audio 
component with a built-in DTS 
decoder.
69
A
d
d
iti
o
n
a
l In
fo
rm
a
tio
n
Additional Information
Troubleshooting
If you experience any of the following 
difficulties while using the player, use this 
troubleshooting guide to help remedy the 
problem before requesting repairs. Should 
any problem persist, consult your nearest 
Sony dealer.
Power
The power is not turned on.
, Check that the AC power cord is connected 
securely.
Picture
There is no picture/picture noise appears.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, Check the connection to your TV (page 18) 
and switch the input selector on your TV so 
that the signal from the player appears on 
the TV screen.
, The disc is dirty or flawed.
, If the picture output from your player goes 
through your VCR to get to your TV or if 
your player is connected to a combination 
TV/VIDEO player, the copy-protection 
signal applied to some DVD programmes 
could affect picture quality. If you still 
experience problems even when you 
connect your player directly to your TV, 
please try connecting your player to your 
TV’s S VIDEO input (page 18).
, (For Asian models only) 
If the colour system of your player does not 
match with that of your TV, change the 
colour system of the player. For details, see 
page 15. (You cannot change the colour 
system of the DVD disc itself.)
, The picture on the screen becomes black 
and white when you play a disc recorded in 
a colour system that is different from your 
TV.
Even though you set the aspect ratio in “TV 
TYPE” of “SCREEN SETUP,” the picture 
does not fill the screen.
, The aspect ratio of the disc is fixed on your 
DVD.
Sound
There is no sound.
, Re-connect the connecting cord securely.
, The connecting cord is damaged.
, The player is connected to the wrong input 
jack on the amplifier (receiver) (page 23, 
24, 25).
, The amplifier (receiver) input is not 
correctly set.
, The player is in pause mode or in Slow-
motion Play mode.
, The player is in fast forward or fast reverse 
mode.
, If the audio signal does not come through 
the DIGITAL OUT (OPTICAL) jack, check 
the audio settings (page 67).
, While playing a Super VCD on which the 
audio track 2 is not recorded, no sound will 
come out when you select “2:STEREO,” 
“2:1/L” or “2:2/R.”
Sound is noisy.
, When playing a CD with DTS sound tracks, 
noise will come from the AUDIO OUT L/R 
jacks or DIGITAL OUT (OPTICAL) jack 
(page 31).
Sound distortion occurs.
, Set “AUDIO ATT” in “AUDIO SETUP” to 
“ON” (page 66).
The sound volume is low.
, The sound volume is low on some DVDs. 
The sound volume may improve if you set 
“AUDIO DRC” to “TV MODE” (page 66).
, Set “AUDIO ATT” in “AUDIO SETUP” to 
“OFF” (page 66).
Operation
The remote does not function.
, There are obstacles between the remote and 
the player.
, The distance between the remote and the 
player is too far.
, The remote is not pointed at the remote 
sensor on the player.
c continued
70
, The remote sensor of the player is exposed 
to strong light.
, The batteries in the remote are weak.
The disc does not play.
, There is no disc inside.
, The disc is turned over.
Insert the disc with the labeled (or non-
playback) side facing the disc window.
, The player cannot play certain discs (page 7).
, The region code on the DVD does not match 
the player.
, Moisture has condensed inside the player 
(page 3).
, The player cannot play CD-Rs, CD-RWs, 
DVD-Rs, or DVD-RWs (video mode) that 
are not finalized (page 7).
“Data error” appears when you play a 
DATA CD.
, The MP3 audio track you want to play is 
broken.
, The data is not MPEG1 Audio Layer 3 data.
The MP3 audio track cannot be played 
(page 38).
, The DATA CD is not recorded in the MP3 
format that conforms to ISO9660 Level 1/
Level 2 or Joliet.
, The MP3 audio track does not have the 
extension “.MP3.”
, The data is not formatted in MP3 even 
though it has the extension “.MP3.”
, The data is not MPEG1 Audio Layer 3 data.
, The player cannot play audio tracks in 
MP3PRO format.
The title of the MP3 audio album or track 
is not correctly displayed.
, The player can only display numbers and 
alphabet. Other characters are displayed as 
asterisks.
The disc does not start playing from the 
beginning.
, Programme Play, Shuffle Play, Repeat Play, 
or A-B Repeat Play has been selected (page 
39).
, Resume play has taken effect (page 34).
The player starts playing the disc 
automatically.
, The disc features an auto playback function.
, “AUTO PLAY” in “CUSTOM SETUP” is 
set to “ON” (page 65).
Playback stops automatically.
, While playing discs with an auto pause 
signal, the player stops playback at the auto 
pause signal.
You cannot perform some functions such 
as Stop, Search, Slow-motion Play, 
Repeat Play, Shuffle Play, or Programme 
Play.
, Depending on the disc, you may not be able 
to do some of the operations above. See the 
operating manual that comes with the disc.
The language for the sound track cannot 
be changed.
, Try using the DVD’s menu instead of the 
direct selection button on the remote (page 
35).
, Multilingual tracks are not recorded on the 
DVD being played.
, The DVD prohibits changing of the 
language for the sound track.
The subtitle language cannot be changed 
or turned off.
, Try using the DVD’s menu instead of the 
direct selection button on the remote (page 
35).
, Multilingual subtitles are not recorded on 
the DVD being played.
, The DVD prohibits changing of the 
subtitles.
The angles cannot be changed.
, Try using the DVD’s menu instead of the 
direct selection button on the remote (page 
35).
, Multi-angles are not recorded on the DVD 
being played. 
, The angle can only be changed when the 
 indicator lights up in blue on the 
Control Bar (page 51).
, The DVD prohibits changing of the angles.
71
Add
iti
o
n
a
l I
n
fo
rm
at
io
n
The player does not operate properly.
, When static electricity, etc., causes the 
player to operate abnormally, unplug the 
player.
Five numbers or letters are displayed on 
the screen.
, The self-diagnosis function was activated. 
(See the table on page 71.)
The disc does not eject and “Locked” 
appears on the TV screen.
, Child Lock is set (page 33).
The disc does not enter or eject.
, Moisture has condensed inside the player 
(page 3).
, The disc is non-standard shaped (page 3).
, The disc does not enter if there is an another 
disc inside.
Self-diagnosis Function 
(When letters/numbers appear in the 
display)
When the self-diagnosis function is activated 
to prevent the player from malfunctioning, a 
five-character service number (e.g., C 13 00) 
with a combination of a letter and four digits 
appears on the screen. In this case, check the 
following table.
First three 
characters of 
the service 
number
Cause and/or corrective 
action
C 13
The disc is dirty.
,Clean the disc with a soft 
cloth (page 8).
C 31
The disc is not inserted 
correctly.
,Re-insert the disc 
correctly.
E XX
(xx is a number)
To prevent a malfunction, the 
player has performed the 
self-diagnosis function.
,Contact your nearest 
Sony dealer or local 
authorized Sony service 
facility and give the 5-
character service number.
Example: E 61 10
C:13:00
1-18E
72
Glossary
Chapter (page 45)
Sections of a picture or a music feature that 
are smaller than titles. A title is composed of 
several chapters. Depending on the disc, no 
chapters may be recorded.
Dolby Digital (page 25, 67)
Digital audio compression technology 
developed by Dolby Laboratories. This 
technology conforms to 5.1-channel surround 
sound. The rear channel is stereo and there is 
a discrete subwoofer channel in this format. 
Dolby Digital provides the same 5.1 discrete 
channels of high quality digital audio found in 
Dolby Digital cinema audio systems. Good 
channel separation is realized because all of 
the channel data are recorded discretely and 
little deterioration is realized because all 
channel data processing is digital. 
Dolby Surround (Pro Logic) (page 24, 67)
Audio signal processing technology that 
Dolby Laboratories developed for surround 
sound. When the input signal contains a 
surround component, the Pro Logic process 
outputs the front, centre and rear signals. The 
rear channel is monaural.
DTS (page 25, 68)
Digital audio compression technology that 
Digital Theater Systems, Inc. developed. This 
technology conforms to 5.1-channel surround 
sound. The rear channel is stereo and there is 
a discrete subwoofer channel in this format. 
DTS provides the same 5.1 discrete channels 
of high quality digital audio.
Good channel separation is realized because 
all of the channel data is recorded discretely 
and little deterioration is realized because all 
channel data processing is digital.
DVD (page 7)
A disc that contains up to 8 hours of moving 
pictures even though its diameter is the same 
as a CD.
The data capacity of a single-layer and single-
sided DVD is 4.7 GB (Giga Byte), which is 7 
times that of a CD. The data capacity of a 
double-layer and single-sided DVD is 8.5 
GB, a single-layer and double-sided DVD is 
9.4 GB, and double-layer and double-sided 
DVD is 17 GB.
The picture data uses the MPEG 2 format, one 
of the worldwide standards of digital 
compression technology. The picture data is 
compressed to about 1/40 (average) of its 
original size. The DVD also uses a variable 
rate coding technology that changes the data 
to be allocated according to the status of the 
picture. Audio information is recorded in a 
multi-channel format, such as Dolby Digital, 
allowing you to enjoy a more real audio 
presence.
Furthermore, various advanced functions 
such as the multi-angle, multilingual, and 
Parental Control functions are provided with 
the DVD.
Index (CD)/Video Index (VIDEO CD) (page 
45)
A number that divides a track into sections to 
easily locate the point you want on a CD or 
VIDEO CD. Depending on the disc, no index 
may be recorded.
MPEG audio (page 25, 68)
International standard coding system used to 
compress audio digital signals authorized by 
ISO/IEC. MPEG 1 conforms to up to 2-
channel stereo. MPEG 2, used on DVDs, 
conforms to up to 7.1-channel surround.
Scene (page 45)
On a VIDEO CD with PBC (playback 
control) functions, the menu screens, moving 
pictures and still pictures are divided into 
sections called “scenes.”
Title (page 45)
The longest section of a picture or music 
feature on a DVD, movie, etc., in video 
software, or the entire album in audio 
software. 
Track (page 45)
Sections of a picture or a music feature on a 
CD or VIDEO CD (the length of a song).
74
Language Code List
For details, see pages 48, 51, 63.
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1061 Bislama
1066 Bengali; 
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1171 Faroese
1174 French
1181 Frisian
1183 Irish
1186 Scots Gaelic 
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian; 
Lettish
1345 Malagasy
1347 Maori
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1358 Maltese
1363 Burmese
1365 Nauru
1369 Nepali
1376 Dutch
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto; 
Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
Croatian
1503 Singhalese
1505 Slovak
1506 Slovenian
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1525 Telugu
1527 Tajik
1528 Thai
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1543 Twi
1557 Ukrainian
1564 Urdu
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1703 Not specified
2-1
DVP-F25
SECTION 2
DISASSEMBLY
Upper case assembly
(Page 2-2)
Lower case
(Page 2-2)
Control panel assembly
(Page 2-2)
Mechanism deck
(Page 2-3)
Power block
(Page 2-5)
MB-106 board
(Page 2-6)
AV-68 board
(Page 2-6)
Chucking arm block
(Page 2-3)
MD-90 board, Lever assembly
(Page 2-3)
BU holder, Rack (L) 
(Page 2-4)
Roller (slider)
(Page 2-5)
Slider (L), Slider (R)
(Page 2-5)
Base (C) assembly
(Page 2-4)
Gate assembly, cover (C)
(Page 2-4)
Optical device 
(Page 2-4)
SW-377 board, IF-96 board
(Page 2-3)
Cover
(Page 2-2)
IR-42 board
(Page 2-5)
Set
The following flow chart shows the disassembly procedure.
2-2
2-4. COVER
1
 Four screws
     (B3)
2
 Remove the cover 
     in the direction of 
     the arrow.
2-1. UPPER CASE ASSEMBLY
2-2. LOWER CASE
2
 Four screws
     (B3)
1
 Remove the terminal cover (lower) assembly
     in the direction of the arrow.
4
 Remove the upper case assembly 
     in the direction of the arrow.
3
 Six claws
5
 Remove the lower case
     in the direction of the arrow.
3
 Four claws
2
 Two claws
1
 Three lock claws 
4
 Two slits
4
 Two slits
2-3. CONTROL PANEL ASSEMBLY
4
 Remove the Control panel assembly
     in the direction of the arrow.
3
 Three claws
2
 Claw
1
 Claw 
NOTE: Follow the disassembly procedure in the numerical order given.
Page of 91
Display

Click on the first or last page to see other DVP-F25 service manuals if exist.