Sony BDP-S6200 Service Manual ▷ View online
BDP-S6200
6-6
6-5. FR-1304 Board Flowchart
Power key can’t
Function
Any pulse appear if bu on press
at pin 12 ND701
FR board is NG
Any CLK signal at pin 12 CN701
To main fl
owchart
Any high (3.3V) to low (0V) signal
at pin 14 CN701
To main flowchart
Any signal at pin 14 CN701 when
power bƵƩon being pressed?
power bƵƩon being pressed?
FR board is NG
To main flowchart
Yes
Yes
Yes
Yes
No
No
No
No
Open/Close Key Can’t Function
Any pulse appear if button
press at pin 11 ND701
Any CLK signal at
pin 12 CN701
pin 12 CN701
Any Signal at pin 14 CN701
when Open/Close Button being
pressed?
Any High (3.3V) to
Low (0V) Signal at pin 14
CN701
To Main Flowchart
To Main Flowchart
To Main Flowchart
FR Board is NG
FR Board is NG
No
No
No
No
Yes
Yes
Yes
Yes
BDP-S6200
6-7
6-6. Remote Does Not Operate
Check of +3.3V voltage at IC703 pin17?
No
(MB board)
No
To Power supply flow chart
Yes
No
Check FFC disconnected from
CN701 or broken?
Yes
Check of appearance waveform during
pressing remote control at IC703 pin15
No
Yes
Check of +3.3V voltage at CN1002 pin 17?
Check of +3.3V voltage at CN701 pin 17?
No
FFC is NG
If symptoms do not improve,
FR board is NG
Check of appearance waveform during
pressing remote control at CN1002
pin15 (MB board)
Yes
Yes
FR Board is NG
No
Check of appearance waveform
during pressing remote control
at CN701 pin15
No
Replace IC703
If symptoms do not improve,
FR board is NG
Check pattern along SIRCS line
If symptom do not improve,
FR board is NG
Check FFC disconnected from
CN701 or broken?
No
Reconnect FFC
If symptoms do not improve,
FFC is NG
Yes
Yes
FR Board is NG
Yes
Check pattern around IC710
If symptom do not improve,
FR board is NG
CHECK IC101
BDP-S6200
6-8
6-7. Drive fl owchart
Optical Block Unit (BU) IOP check flow (zz) ~ [Before BU Replacem
Optical Block unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement]
nt]
e
BDP-S6200/BX620
can play the BD-disc
can play the BD-disc
BLX-104
Check Drive Power Supply
Check
PS301, PS302
Replace PS when open
Check / replace the FFC cable, then check
BDP-
S6200/BX620
operates normally
OPT-005 FFC cable (1-839-540-11) @
OPT-1003 FFC cable (1-848-104-11)
OPT-1003 FFC cable (1-848-104-11)
Check the Optical Block Unit (BU) by
service mode. (Flowchart zz)
BU IOP is OK?
Replace the Optical Block Unit (BU)
Optical Block Unit (BU) replace
(Flowchart yy)
OK
Optical Block or BU no problem
DVD: HLX-513
CD: HLX-A1
CD: HLX-A1
NO
YES
NO
YES
YES
NO
NO
YES
NO
YES
Enter Service Mode
Press
<OPEN/CLOSE>., <PLAY>,<STOP>
and plug in AC Power
Inside *Service Mode Menu
Select [8] Drive
Inside *Drive
Select [7] OP Check Menu
Inside *OP Check Menu
Select [3] dIOP then press 'ENTER'
Specification dIOP
BD:
6mA
DVD, CD:
9mA
IOP out of specification need BU
replacement
Optical Block Unit (BU) replace
(Flowchart yy)
AC Power OFF
NO
YES
Remove the defective BU from Loading
Assy and also remove BU insulator (4pcs)
Unpack new BU and take OP Data
Barcode photo by camera
Assemble BU with Insulators to Loading
Assy (tighten screw with 2kgf)
Decode the OP Data Barcode photo using
BDPRdec.exe
and save the test data to
USB memory
(File Name: BuData.txt)
Enter Service Mode and insert USB
memory to USB connector
Select [8] Drive -->
Select [1] Drive OP data Write
Press ENTER
After Finishing ReWrite OP data
--> Turn AC Power OFF
And confirm dIOP by select [7] OP Check
Menu to verify IOP in specification
IOP in specification --> Turn AC Power
OFF
Turn Power ON and check playback
performance using BD, DVD and CD
BLX-104
DVD: HLX-513
CD: HLX-A1
CD: HLX-A1
The following cases need OP Data Write:
(1) Replace BU (MB is original)
(2) Replace MB (BU is original)
(3) Replace both BU and MB
(2) Replace MB (BU is original)
(3) Replace both BU and MB
JIG requirement
Digital camera (with macro mode)
Barcode decoder (BDPRdec.exe)
installed in jig
PC's (jig purpose)
USB memory
ESD free work bench
Barcode decoder (BDPRdec.exe)
installed in jig
PC's (jig purpose)
USB memory
ESD free work bench
-
+
-
+
C888 Pin 1: 5V
C889 Pin 1: 12V
Select Mode : 1 or 2
on:
ti
Explana
t
e 1: BDV se
Mod
Mode 2: BDP set
Mode 2: BDP set
BDP-S6200/BX620
can play the DVD/CD-disc
can play the DVD/CD-disc
BDP-S6200
6-9
6-8. Ethernet fl owchart
Wifi fl owchart
Cannot connect with the network, cannot
update through the network
update through the network
Is the LAN cable plugged in properly?
No
Plug in the LAN cable firmly
Yes
Is the LED of the hub router lit?
(LINK LED)
(LINK LED)
No
Is power supplied to the MB board?
No
To Power Supply (System) flowchart
Yes
Are the network settings of the menu
correct?
correct?
No
Make the correct network settings.
Yes
START
Retry connection
Connection
Success?
Success?
Change MB board
END
Wireless setup fail.
Check SW5V at Wi
Į Module
pin 5
To power supply
Ňow chart
Check usb harness connec
Ɵon
is OK?
SW5V supplied OK
Plug in harness properly
NO
NO
YES
YES
Repeat wireless setup
Can establish
Wi-Fi Connec
Ɵon?
Change Main board
NO
END
START
YES
Click on the first or last page to see other BDP-S6200 service manuals if exist.