Sony BDP-S5000ES Service Manual ▷ View online
-
BDP-S5000ES
(Screen 1)
Select Log
[2] Command Log
HELP : [DOWN][ENT][(NUM)]
Log: Error Log/Command Log (Output of each Log)
Description:
This screen displays the contents of each log.
This screen displays the contents of each log.
Screen 1: Selects the type of log to display
Operation:
[1]
Operation:
[1]
Moves to the Error Log output screen
[2]
Moves to the Command Log output screen
[UP] [DOWN]
Moves the cursor
[ENT]
Moves to the item selected with the cursor
[RET]
Returns to the top menu of the service mode
Screen 2: Displays the Error Log
Operation:
[LEFT]
Operation:
[LEFT]
Returns to the previous page
[RIGHT]
Moves to the next page
[RET]
Returns to the screen (screen 1) that selects the log type
[RED]
Writes the log contents to an USB memory device
Screen 3: Displays the Command Log
Operation:
[LEFT]
Operation:
[LEFT]
Returns to the previous page
[RIGHT]
Moves to the next page
[RET]
Returns to the screen (screen 1) that selects the log type
[RED]
Writes the log contents to an USB memory device
Display tube:
Log type selected
Log type selected
Error Log: S-ELOG
Command Log: S-CLOG
Command Log: S-CLOG
During log display
Page display ex) 1/50
>Viewing the log display
Error Log:ẅ
Error Log:ẅ
001 08/01/01 00: 53: 19: [ErrCode: 080400000000]
[Number (starting from old log) ] [date] [time] [error code]
[Number (starting from old log) ] [date] [time] [error code]
Command Log:
0001 08/01/01 00: 53: 19: 0 POWER
0
[Number (starting from old log) ] [date] [time] [count] [command name]
[Edge 0: on 1: off]
[Edge 0: on 1: off]
About copying log to USB memory device
Press the [RED] button in each log display screen with the USB memory device inserted into the
set
Error Log:
ẅẅẅẅẅẅẅWhen getErrLogFile.trm file exists in the USB memory device,
Press the [RED] button in each log display screen with the USB memory device inserted into the
set
Error Log:
ẅẅẅẅẅẅẅWhen getErrLogFile.trm file exists in the USB memory device,
errlog.log file is output.
Command Log:
ẅẅẅẅẅẅẅWhen getCmdLogFile.trm file exists in the USB memory device,
ẅẅẅẅẅẅẅWhen getCmdLogFile.trm file exists in the USB memory device,
cmdlog.log file is output.
This function cannot be used when performing USB Host test in the Diag screen.
Writing to an USB memory devices takes a few seconds. Wait sufficiently before removing
device.
device.
(Screen 2)
Error Log
001 08/01/01 00: 53: 19: [ErrCode: 080400000000]
002 08/01/01 00: 53: 45: [ErrCode: 080400252100]
003 08/01/01 00: 54: 00: [ErrCode: 080400005555]
002 08/01/01 00: 53: 45: [ErrCode: 080400252100]
003 08/01/01 00: 54: 00: [ErrCode: 080400005555]
:
:
:
[1] Error Log
(Screen 3)
Command Log
0001 08/01/01 00: 53: 19: 0 POWER 0
0002 08/01/01 00: 53: 45: 1 POWER
0002 08/01/01 00: 53: 45: 1 POWER
1
0003 08/01/01 00: 54: 00: 79 OPEN_CLOSE 0
:
:
:
< Page 1/50 >
-
BDP-S5000ES
(Screen 1)
Factory Initialize
[ENT] Start Initialize
[RET] Return to Top Menu
[RET] Return to Top Menu
Factory Initialize (Factory Settings)
Description:
This screen returns the set to the factory settings.
All changes settings will be restored to the factory settings, and all saved titles will be
deleted. Note that executing this function does not complete the initialization process.
The initialization process is completed by rebooting the set after operation is
performed.
Normal rebooting is required for the initialization to take effect. Initialization is not
complete when rebooting in special modes such as the service mode.
This screen returns the set to the factory settings.
All changes settings will be restored to the factory settings, and all saved titles will be
deleted. Note that executing this function does not complete the initialization process.
The initialization process is completed by rebooting the set after operation is
performed.
Normal rebooting is required for the initialization to take effect. Initialization is not
complete when rebooting in special modes such as the service mode.
Screen 1
Press [ENT] in this screen when restoring the set to its factory settings.
All saved titles will also be deleted.
Operation:
[ENT]
Press [ENT] in this screen when restoring the set to its factory settings.
All saved titles will also be deleted.
Operation:
[ENT]
Initialize the set to its factory settings
[RET]
Return to the top menu of the service mode
Screen 2
This is the screen that is displayed after performing initialization.
The initialization process is completed by rebooting the set.
Remove the AC power cord and insert the AC power cord again.
Operations in other service menus can also be performed.
This is the screen that is displayed after performing initialization.
The initialization process is completed by rebooting the set.
Remove the AC power cord and insert the AC power cord again.
Operations in other service menus can also be performed.
Display tube:
During initialization:
During initialization:
SETTING
When initialization is OK:
INIT-OK (Screen 2)
When initialization is NG:
INIT-NG
(Screen 2)
Factory Initialize
Reboot to complete.
[RET] Return to Top Menu
HELP: [RET]
-
BDP-S5000ES
(Screen 1)
Network
Test: Ping
Network (Network Test Diagnosis Screen: Ifconfig)
Description:
Network menu
Each network diagnosis function is accessed from this screen.
Network menu
Each network diagnosis function is accessed from this screen.
Screen 1: Ifconfig test
Operation:
[ENT]
Operation:
[ENT]
Executes the Ifconfig command (displays network settings)
[RIGHT]
Moves to the Ping test
[RTN]
Returns to the top menu of the service mode
Screen 2: Ping test
Screen:
[LEFT]
Screen:
[LEFT]
Moves to the Ifconfig test
[RTN]
Returns to the top menu of the service mode
See next page for details on Ping test
Screen 3: When executing the Ifconfig test
Displays the output result of the Ifconfig command
Operation:
[ENT]
Displays the output result of the Ifconfig command
Operation:
[ENT]
Executes the command again
[RIGHT]
Moves to the Ping test
[RTN]
Returns to the top menu of the service mode
Display tube:
S-NET
(Screen 2)
Network
Test: Ifconfig
ޓޓPing To :
[START]
Ping To:
Ping
Ifconfig
(Screen 3)
Network
Test: Ping
Link encap: Ethernet HWaddr 00: 16: 01: 85: 21: A3
inet addr: 43.17.110.225 Bcast: 43.17.110.255 Mask: 255.255.255.0
inet6 addr: fe80:: 216: 1ff: fe85: 21a3/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets: 533280 errors: 0 dropped: 0 overruns: 0 frame: 0
TX packets: 219639 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisions: 0 txqueuelen: 1000
RX bytes: 44569483 (42.5 MiB) TX bytes: 46206300 (44.0 MiB)
Interrupt: 217 Base address: 0x9c00
inet addr: 43.17.110.225 Bcast: 43.17.110.255 Mask: 255.255.255.0
inet6 addr: fe80:: 216: 1ff: fe85: 21a3/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU: 1500 Metric: 1
RX packets: 533280 errors: 0 dropped: 0 overruns: 0 frame: 0
TX packets: 219639 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisions: 0 txqueuelen: 1000
RX bytes: 44569483 (42.5 MiB) TX bytes: 46206300 (44.0 MiB)
Interrupt: 217 Base address: 0x9c00
HELP: [ENT]: Re/Exe [RIGHT]
Ifconfig
May differ slightly from the actual screens
-10
BDP-S5000ES
Network (Network Test Diagnosis Screen: Ping)
Description:
Ping test
Ping test
Screen 1: Ping test
Operation:
[UP]
Operation:
[UP]
Sets the IP address of the Ping destination
[DOWN]
Prepares for execution
[RTN]
Returns to the top menu of the service mode
Screen 2: Specifies the IP address of the Ping destination (IP input mode)
Ping To: Input the IP address by pressing [ENT] when highlighted
Operation:
[ENT]
Ping To: Input the IP address by pressing [ENT] when highlighted
Operation:
[ENT]
Ends input
[RTN]
Ends input
[LEFT]
Ends input, and moves to the Ifconfig test
[ (NUM) ]
Inputs characters ‘0-9’
[TIME]
Inputs character ‘.’
[CLEAR]
Back space
Screen 3: When executing Ping test
Ping is executed when pressing [ENT] while [START] is highlighted.
Operation:
[ENT]
Ping is executed when pressing [ENT] while [START] is highlighted.
Operation:
[ENT]
Executes the Ping test
[UP]
Sets the IP address of the Ping destination
[DOWN]
Prepares for execution
[RTN]
Returns to the top menu of the service mode
Display tube:
S-NET
(Screen 1)
Network
Test: Ifconfig
ޓޓPing To :
[START]
Ping To:
Ping
(Screen 2)
Network
Test: Ifconfig
ޓޓPing To :
[ENT]: Release
[RET]: Release
[RET]: Release
[LEFT] : Ifconfig Test
[(NUM)]: ‘0-9’
[TIME] : ‘.’
[CLEAR]: Backspace
[(NUM)]: ‘0-9’
[TIME] : ‘.’
[CLEAR]: Backspace
Ping To: > 172.16.200.13
Ping
(Screen 3)
Network
Test: Ifconfig
ޓޓPing To: 172.16.200.13
PING 172.16.200.13 (172.16.200.13) 56 (84) bytes of data.
64 bytes from 172.16.200.13: icmp_seq=0 ttl=64 time=0.022 ms
64 bytes from 172.16.200.13: icmp_seq=0 ttl=64 time=0.022 ms
--- 172.16.200.13 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev=0.022/0.022/0.022/0.000 ms, pipe 2
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev=0.022/0.022/0.022/0.000 ms, pipe 2
HELP: [ENT]: Start [UP] [LEFT]
Ping
May differ slightly from the actual screens
[START]
Click on the first or last page to see other BDP-S5000ES service manuals if exist.