Sony BDP-S2200 Service Manual ▷ View online
6-9
BDP-S2200
6-8. Drive fl owchart
Optical Block Unit (BU) IOP check flow (zz) ~ [Before BU Replacem
]
t
n
e
BDP Palayer
BLX-104
can play the DVD/CD-disc
Check Drive Power Supply
Check
PS201
Check / replace the FFC cable, then check
operates normally
FFC OPT-1003 cable
Check the Optical Block Unit (BU) by
service mode. (Flowchart zz)
BU IOP is OK?
Replace the Optical Block Unit (BU)
Optical Block Unit (BU) replace
(Flowchart yy)
OK
Optical Block or BU no problem
DVD: HLX-513
CD: HLX-A1
CD: HLX-A1
NO
YES
NO
YES
YES
NO
NO
YES
NO
YES
Enter Service Mode
Press <OPEN/CLOSE>., <PLAY>,<STOP>
and plug in AC Power
Inside *Service Mode Menu
Select [8] Drive
Inside *Drive
Select [7] OP Check Menu
Inside *OP Check Menu
Select [3] dIOP then press 'ENTER'
Specification dIOP
BD:
6mA
DVD, CD:
9mA
IOP out of specification need BU
replacement
Optical Block Unit (BU) replace
(Flowchart yy)
AC Power OFF
NO
YES
Remove the defective BU from Loading
Assy and also remove BU insulator (4pcs)
Unpack new BU and take OP Data
Barcode photo by camera
Assemble BU with Insulators to Loading
Assy (tighten screw with 2kgf)
Decode the OP Data Barcode photo using
BDPRdec.exe
BDPRdec.exe
and save the test data to
USB memory
(File Name: BuData.txt)
Enter Service Mode and insert USB
memory to USB connector
Select [8] Drive -->
Select [1] Drive OP data Write
Press ENTER
After Finishing ReWrite OP data
--> Turn AC Power OFF
And confirm dIOP by select [7] OP Check
Menu to verify IOP in specification
IOP in specification --> Turn AC Power
OFF
Turn Power ON and check playback
performance using BD, DVD and CD
BLX-104
DVD: HLX-513
CD: HLX-A1
CD: HLX-A1
The following cases need OP Data Write:
(1) Replace BU (MB is original)
(2) Replace MB (BU is original)
(3) Replace both BU and MB
(2) Replace MB (BU is original)
(3) Replace both BU and MB
JIG requirement
Digital camera (with macro mode)
Barcode decoder (BDPRdec.exe)
installed in jig
PC's (jig purpose)
USB memory
ESD free work bench
Barcode decoder (BDPRdec.exe)
installed in jig
PC's (jig purpose)
USB memory
ESD free work bench
l
-
+
-
+
IC210 Pin 3: 5V
Q211 Pin 6: 12V
P
Select Mode : 1 or 2
Explanation:
: BDV set
Mode 1
Mode 2: BDP set
Mode 2: BDP set
can play the BD-disc
BDP Player
BDP Player
Optical Block Unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement]
6-10
BDP-S2200
6-9. Wifi fl owchart
Wifi fl owchart
Wireless setup fail.
Check SW5V at Wi
Į Module
pin 5
To power supply
Ňow chart
Check usb haness connec
Ɵon
is OK?
SW5V supplied OK
Plug in harness properly
NO
NO
YES
YES
Repeat wireless setup
Can establish
Wi-Fi Connec
Ɵon?
Change MB board
NO
END
START
YES
6-11
BDP-S2200
6-10. USB (Front) Device Flow
USB device is not recognized
Insert the USB device again.
Is it recognized when the power is
turned OFF and then ON again?
Is it recognized when the power is
turned OFF and then ON again?
No
Is 5V present at CN201
(FR-1303)
board
) pin1?
No
Is 5V present at
CN392
(MB board) Pin 8 or pin 9?
No
Is 5V present at
IC370 pin1
(MB board)?
No
Power supply IC370 (MB board -
defective
defective
Ye
s
Y
s
e
Y
Yes
s
e
Poor contact of the USB device
Defective FFC between the IF
board and the MB board.
board and the MB board.
Does replacing IC370(MB board)
improve the symptoms?
improve the symptoms?
No
Replace the MB board
Yes
Replace the FFC between the
MB board and the IF board.
Do the symptoms improve?
MB board and the IF board.
Do the symptoms improve?
No
Replace the MB board
IC370
(
.
MB board) defective
Yes
Defective FFC between the IF
board and the MB board
board and the MB board
E
7-1
BDP-S2200
The components identifi ed by mark
or dotted
line with mark
are critical for safety.
Replace only with part number specifi ed.
Les composants iden tifi és par une marque
sont critiquens pour la sécurité.
Ne les remplace r que par une pièce portant le
numéro spécifi é.
sont critiquens pour la sécurité.
Ne les remplace r que par une pièce portant le
numéro spécifi é.
The components identifi ed by mark contain
confi dential information.
Strictly follow the instructions whenever the
components are repaired and/or replaced.
Les composants identifi és par la marque
contiennent des informations confi dentielles.
Suivre scrupuleusement les instructions
chaque fois qu’un composant est remplacé et
/ ou réparé.
7-1.EXPLODED VIEWS
NOTE:
NOTE:
-XX and -X mean standardized parts, so they may
have some difference from the original one.
Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
Parts Color Cabinet’s Color
Items marked “*” are not stocked since they are sel-
dom required for routine service. Some delay should
be anticipated when ordering these items.
The mechanical parts with no reference number in the
exploded views are not supplied.
Accessories and packing materials are given in the last
of the electrical parts list.
7-1-1 CASE & MAIN CHASSIS SECTION
ns: not supplied
SECTION 7
REPAIR PARTS LIST
ns
ns
ns
ns
ns
ns
ns
ns
ns
104
102
See Drive section
103
101
Ref. No.
Part No.
Description
Remark
*
101
A-1976-040-A
SERVICE ASSY, CASE UPPER
102
X-2588-100-1
TRAY ASSY, COVER
*
103
X-2590-220-1
PANEL ASSY, FRONT (AX3D/W)
104
A-2060-194-A
SERVICE ASSY, MB
Click on the first or last page to see other BDP-S2200 service manuals if exist.