Sony BDP-BX38 / BDP-S280 / BDP-S380 / BDP-S383 Service Manual ▷ View online
1-22
BDP-BX38/S280/S380/S383
Shoot the barcode
Format is JPEG
Format is JPEG
Application Software
Data convert from
JPEG
Data convert from
JPEG
TEXT
Save the TEXT data
USB device is connected
to symbol on the
rear unit, and the TEXT
data as new data is
loaded to unit by service
mode.
to symbol on the
rear unit, and the TEXT
data as new data is
loaded to unit by service
mode.
The application software will be a service jig .
service jig, and the recording media will be CD-R.
Description: BDPRdec.exe
When instruction to PC, password is required.
The password will be supplied to only service HQ, and service center
name, q’ty and all of software registered information should be
maintained by service HQ, and Video will ask to report the registration
information.
1-2
3E
BDP-BX38/S280/S380/S383
.
5
-
1
REAR PANEL ASSEMBLY CAUTION
Whenever you need to assemble the rear panel, please make sure that the Ethernet connector (CN801)
Top Contact Springs are in good condition with height ≥2.0mm ± 0.5mm (refer to Fig 1)
Top Contact Springs are in good condition with height ≥2.0mm ± 0.5mm (refer to Fig 1)
before assembling the rear panel.
Spec.
Fig.1
Good Contact
Fig.2
When assembling the rear panel, please ensure good contact
between the Top Contact Springs to the rear panel.
between the Top Contact Springs to the rear panel.
2-1
BDP-BX38/S280/S380/S383
SECTION 2
DISASSEMBLY
This set can be disassembled in the order shown below.
Note: Follow the disassembly procedure in the numerical order given.
2-2. UPPER CASE
tapping screw
(tightening torque = 5 to
6 NJIFP
1 Tapping screw
(tightening torque =
5 to 6 NJIFP
2 Three tapping screws
(tightening torque =
5 to6 NJIFP
3
2-1. DISASSEMBLY
FLOW
2-2. UPPER CASE
3DJH
2-3. TRAY COVER ASSY
3DJH
2-8. SWITCHING REGULATOR
3DJH
2-7.
FRONT PANEL ASSY
3DJH
2-5. REAR PANEL
3DJH
2-6.
MB-138 BOARD
3DJH
2-4.
BD DRIVE
3DJH
SET
Upper case
FL-203 & IF-170 boards
1
2-2
8
4
2
One screws
(tightening torque = 6 to 7 kgf•cm)
Front Panel
3
Harness (FLM-001)
CN331
CN331
FL-203 Board
2-4. FRONT PANEL ASSY, FL-203 AND IF-170 BOARD
BDP-BX38/S280/S380/S383
2-3. TRAY COVER ASSY
tray
3 Tray cover assy
2
5
Eight hook
1
7 Two screws +BV3 (3-CR)
(tightening torque = 6 to 7 kgf•cm)
1 Insert a clip in the hole of a drive
to open a tray.
IF-170 Board
9
Light guide
cover
cover
6
+BV3 (3-CR)
One screws
(tightening torque = 6 to 7 kgf•cm)
+BV3 (3-CR)
Except BDP-S280
Click on the first or last page to see other BDP-BX38 / BDP-S280 / BDP-S380 / BDP-S383 service manuals if exist.