Sony BDP-A6000 Service Manual ▷ View online
1-4-7. KEM-480AAA/C2RP Packing
䋱䋩㩷㩷1 piece of BU is put into “Bag,Charge Prevention” and
excess part of bag is folded back.
excess part of bag is folded back.
2䋩㩷㩷The BU and Manual instruction are put into Tray (PSFM)
and lid is put on it. Then it is stored in individual carton.
3䋩㩷㩷40pcs of individual carton are
stored in master carton.
4) Seal is attached to top and bottom of carton with PP tape.
(So called “H” shape)
(So called “H” shape)
Manual Instruction
Lid foam tray (480RP)
Antistatic bag
Mechanical deck
Cushion carton (480RP)
C surface cut facing front
Individual carton
Individual carton
PP tape
Shipment label
1-18
BDP-A6000
1-4-8. BU Data Decode Jig
•
JIG Name : BDPRdec.exe
•
Release : 2011.8.25
•
Version : 3.0.0.0
• Software Contents
BDPRdec.exe ; Software
SavePath.ini ; Decoded fi le destination setting fi le
(initial destination is C:\BuData.txt)
TasmanBars.dll ; decode dll
Uninst.exe ; unregistration BDPRdec.exe from PC
• Installations
1.
Unzip
fi les to any PC Folder
2.Check the attached 2D code photo(OK_sample.JPG) drag-and-drop onto BDPRdec.exe, the
Password will be required at fi rst time only, no need P/W from second time.
3.If there is the error message (.NET frame work requirements) please apply
Microsoft .NET Framework 2.0 (or 2.0 SP1) from Microsoft download site.
STEP
1
Microsoft .NET Framework Version 2.0 Redistributable Package (x86)
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5
STEP
2
Microsoft .NET Framework 2.0 Service Pack 1 (x86)
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-aacf-a7633f706ba5
• How to use
Case1
Drag-and-drop 2Dcode photo onto BDPRdec.exe
Case2
Drag-and-drop BU data fi le onto BDPRdec.exe
Data fi le name be changed to specify format and end of 7 character are defi ned
Player : ****BDP.txt
Recoder: ****BRD.txt
#You can also enter the fi le path at the prompt.
• Remarks
Do not change the decoded fi le name “BuData.txt”.
1-19
BDP-A6000
1-4-9. Loading For Service
BDP Loading Assy service parts consists from 2 parts.
1 Holder, Clamper Assy
2 Loading Assy
Currently these parts are producing by 2 vendors. Please
DO NOT COMBINE
1 and 2 (From diferent vendor)
because
THERE IS NO COMPATIBILITY
.
Original “Loading for service” part number is A-1850-153-A
1-4-10. Laser Caution Label
The Loading Assy service parts do not have Laser Caution Label. So that please reuse the original Laser Caution label
and paste it on top of new Loading Assy.
and paste it on top of new Loading Assy.
1-839-582-11
FFC (SPD)
Laser Caution Label
1-839-583-11
FFC (LDG)
Holder, Chuck Assy
䐟
Loading Assy
䐠
1-839-585-11
FFC (OPT)
Limit Sample
Following peel off condition are acceptable
1-20
BDP-A6000
1-4-11. In case of BU assy replacement:
1. OP related data for new assy is controlled by BU factory
2. All of data is recorded into a barcode label
3. The label is put on the assy
4. Service parts will be followed
5. In service, the data should be read out from problem assy
6. The read data should be saved to new assy
1. OP related data for new assy is controlled by BU factory
2. All of data is recorded into a barcode label
3. The label is put on the assy
4. Service parts will be followed
5. In service, the data should be read out from problem assy
6. The read data should be saved to new assy
1-4-12. Fact fi nding:
1. The label is “DATA MATRIX” format
2. The number of data is 91 words
3. The method of reading and saving is required when BU and main board are replaced.
1. The label is “DATA MATRIX” format
2. The number of data is 91 words
3. The method of reading and saving is required when BU and main board are replaced.
1-4-13. New service method
1. All of BU data on the barcode label is shot by digital camera in order to make a JPEG fi le of BU data.
2. Application software in the PC makes digital data from JPEG fi le.
3. The converted data is stored to USB memory.
4. The USB memory is connected to BDP 7G unit.
5. In service mode, there is a command to save the data from USB memory to board memory.
1. All of BU data on the barcode label is shot by digital camera in order to make a JPEG fi le of BU data.
2. Application software in the PC makes digital data from JPEG fi le.
3. The converted data is stored to USB memory.
4. The USB memory is connected to BDP 7G unit.
5. In service mode, there is a command to save the data from USB memory to board memory.
1-4-14 . BU Data
Description: BDPRdec.exe
When instruction to PC, password is required. The password will be supplied to only service HQ, and service center name,
q’ty and all of software registered information should be maintained by service HQ, and Video will ask to report the
registration information.
q’ty and all of software registered information should be maintained by service HQ, and Video will ask to report the
registration information.
Shoot the barcode
Format is JPEG
Format is JPEG
Save the TEXT data
USB device is connected
to symbol on the
rear unit, and the TEXT
data as new data is
loaded to unit by service
mode.
to symbol on the
rear unit, and the TEXT
data as new data is
loaded to unit by service
mode.
Application Software
Data convert from
JPEG
Data convert from
JPEG
TEXT
A
A
1-21
BDP-A6000
Click on the first or last page to see other BDP-A6000 service manuals if exist.