Sony AVD-K150B / AVD-K150E / AVD-K150G / AVD-K150N / AVD-K150R / DAV-D150B / DAV-D150E / DAV-D150G / DAV-D150N Service Manual ▷ View online
9
AVD-K150B/K150E/K150G/K150N/K150R
Connections
AERIAL
Rear of TV
SCART INPUT
Tips
•
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/VCR Receiver. Use one of the connections
described below.
to connect, there are various ways you could connect
the DVD/VCR Receiver. Use one of the connections
described below.
•
Please refer to the manuals of your TV, VIDEO,
Stereo System or other devices as necessary to
make the best connections.
Stereo System or other devices as necessary to
make the best connections.
Caution
−
Make sure the DVD/VCR Receiver is connected
directly to the TV. Select the correct AV input on your
TV.
directly to the TV. Select the correct AV input on your
TV.
−
Do not connect your DVD/VCR Receiver to TV via
your VIDEO. The DVD image could be distorted by
the copy protection system.
your VIDEO. The DVD image could be distorted by
the copy protection system.
Basic connections (AV)
1
Connect the EURO AV1 (TO TV) on the rear panel
of the DVD/VCR Receiver to the scart input socket
on the TV using a SCART lead (E).
of the DVD/VCR Receiver to the scart input socket
on the TV using a SCART lead (E).
2
Some TV broadcasters transmit encoded television
signals which you can only see with a purchased or
rented decoder.You can connect such a decoder
(descrambler) to the DVD/VCR Receiver (D).
signals which you can only see with a purchased or
rented decoder.You can connect such a decoder
(descrambler) to the DVD/VCR Receiver (D).
Basic connection (RF)
1
Connect the aerial cable (A) from your indoor/ out-
door aerial to ANTENA IN jack on the rear panel of
DVD/VCR Receiver.
door aerial to ANTENA IN jack on the rear panel of
DVD/VCR Receiver.
2
Connect the supplied RF cable (R) from the
ANTENA OUT jack on the rear panel of DVD/VCR
Receiver to your television's Aerial Input.
ANTENA OUT jack on the rear panel of DVD/VCR
Receiver to your television's Aerial Input.
Notes
When you connect the DVD/VCR Receiver to your TV,
be sure to turn off the power and unplug both units from
the wall outlet before making any connections.
When you connect the DVD/VCR Receiver to your TV,
be sure to turn off the power and unplug both units from
the wall outlet before making any connections.
TV and Decoder (or Set Top Box) Connections
Make one of the following connections, depending on the capabilities of your existing equipment.
10
AVD-K150B/K150E/K150G/K150N/K150R
Connections (Continued)
Radio Aerial Connections
Connect the supplied FM/AM antennas for radio listen-
ing.
ing.
1
Connect the AM loop antenna to the AM antenna
connectors.
connectors.
2
Connect the FM wire antenna to the FM antenna
connectors.
connectors.
Notes
•
To prevent noise pickup, keep the AM loop antenna
away from the DVD/VCR Receiver and other compo-
nents.
away from the DVD/VCR Receiver and other compo-
nents.
•
Be sure to fully extend the FM wire antenna.
•
After connecting the FM wire antenna, keep it as hori-
zontal as possible.
zontal as possible.
Accessory Audio/Video (A/V)
Connections to DVD/VCR Receiver
Connections to DVD/VCR Receiver
Connect the AV3 IN jacks on the DVD/VCR Receiver to
the audio/video out jacks on your accessory compo-
nent, using optional audio/video cables.
the audio/video out jacks on your accessory compo-
nent, using optional audio/video cables.
Digital Device Connections
Connect the OPTICAL IN jacks on the DVD/VCR
Receiver to the digital audio out (optical) jacks on your
digital device (Game device, Digital Set Top Box, etc.),
using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN,
press INPUT SELECT repeatedly on the remote control
until "AV3 OPT" appears in the display window.
Receiver to the digital audio out (optical) jacks on your
digital device (Game device, Digital Set Top Box, etc.),
using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN,
press INPUT SELECT repeatedly on the remote control
until "AV3 OPT" appears in the display window.
Notes
•
If the audio format of the digital output does not
match the capabilities of your DVD/VCR Receiver, the
DVD/VCR Receiver will produce a strong, distorted
sound or no sound at all.
match the capabilities of your DVD/VCR Receiver, the
DVD/VCR Receiver will produce a strong, distorted
sound or no sound at all.
•
The Optical input function is available only when the
other unit's Sampling Frequency is 32 - 48kHz.
other unit's Sampling Frequency is 32 - 48kHz.
11
AVD-K150B/K150E/K150G/K150N/K150R
Connections (Continued)
Speaker System Connections
Connect the speakers using the supplied speaker cords
by matching the colors of the terminals and those of the
cords. To obtain the best possible surround sound,
adjust the speaker parameters (distance, level, etc.).
by matching the colors of the terminals and those of the
cords. To obtain the best possible surround sound,
adjust the speaker parameters (distance, level, etc.).
Notes
•
Be sure to match the speaker cord to the appropriate
terminal on the components:
terminal on the components:
3
to
3
and
#
to
#
. If
the cords are reversed, the sound will be distorted
and lack bass.
and lack bass.
•
If you use front speakers with low maximum input rat-
ing, adjust the volume carefully to avoid excessive
volume output to the speakers.
ing, adjust the volume carefully to avoid excessive
volume output to the speakers.
•
Do not disassemble the front covers of supplied speakers.
Speaker Positioning
For a normal setup use 6 speakers (2 front speakers,
center speaker, 2 rear speakers and subwoofer).
center speaker, 2 rear speakers and subwoofer).
•
Front Speakers
Based on your listening position, set up the speakers
at equal distance. And by hearing position, set up an
interval between speakers of 45 degree.
Based on your listening position, set up the speakers
at equal distance. And by hearing position, set up an
interval between speakers of 45 degree.
•
Center Speaker
It is ideal that the center speakers and front speakers
are same height. But normally place it above or below
the television as shown below.
It is ideal that the center speakers and front speakers
are same height. But normally place it above or below
the television as shown below.
•
Rear Speakers
Place the rear surround speakers to the left and right
behind the primary listening area. These speakers
recreate sound motion and atmosphere required for
surround playback. For best results, do not install the
rear speakers too far behind the listening position,
install them at or above the level of the listenerês ears.
It is also effective to direct the rear speakers towards
a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is
near to the rear wall set the rear speakers opposite
each other, and set the rear speakers 60 - 90 cm
above the listener's ears.
Place the rear surround speakers to the left and right
behind the primary listening area. These speakers
recreate sound motion and atmosphere required for
surround playback. For best results, do not install the
rear speakers too far behind the listening position,
install them at or above the level of the listenerês ears.
It is also effective to direct the rear speakers towards
a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is
near to the rear wall set the rear speakers opposite
each other, and set the rear speakers 60 - 90 cm
above the listener's ears.
•
Subwoofer
This can be placed in any front position.
This can be placed in any front position.
Note
Speaker stand is optional.
Speaker stand is optional.
Attaching the foot pads
To prevent speaker vibration or
movement while listening, attach the
supplied foot pads to the speaker, as
shown.
movement while listening, attach the
supplied foot pads to the speaker, as
shown.
Attaching the color labels
Attach the color labels onto the rear
panel of the speakers before con-
necting the speakers.
panel of the speakers before con-
necting the speakers.
Front Speaker
(Right)
(Right)
Front Speaker
(Left)
(Left)
Center
Speaker
Rear speaker
(Left surround)
Subwoofer
Rear speaker
(Right surround)
Center Speaker
Front
Speaker
(Left)
Speaker Positioning Example
Rear
Speaker
(Left)
Speaker
(Left)
Rear
Speaker
(Right)
Front
Speaker
(Right)
Speaker
(Right)
Subwoofer
Be sure to attach the ferrite core to
the speaker cables (for connecting to
this unit).
This ferrite core can reduce noises.
the speaker cables (for connecting to
this unit).
This ferrite core can reduce noises.
How to attach the ferrite core.
1
Push the stopper [a] of the ferrite core
to open.
to open.
2
Wind the Center and Subwoofer
Speaker cables once on the ferrite core.
Pass the others straight on the ferrite
core.
Speaker cables once on the ferrite core.
Pass the others straight on the ferrite
core.
3
Close the ferrite core until it clicks.
About Ferrite Core
1
2
3
Foot pads
FRONT L
Color labels
12
AVD-K150B/K150E/K150G/K150N/K150R
SECTION 2
DISASSEMBLY
•
This set can be disassembled in the order shown below.
•
The dotted square with arrow (
) prompts you to move to the next job when all of the works within the dotted square
(
) are completed.
2-1.COVER, FRONT PANEL ASSEMBLY
(Page 12)
2-2.DISPLAY/ KEY BOARD
(Page 13)
2-5.SMPS BOARD
(Page 14)
2-3.VIDEO MECHANISM DECK
(Page 13)
2-4.DVD MECHANISM DECK
(Page 14)
2-7.DVD & AMP BOARD
(Page 15)
2-6.VCR BOARD
(Page 15)
SET
2-1. COVER, FRONT PANEL ASSEMBLY
4
cover
2
three screws
1
two screws
3
two screws
6
three hooks
5
volume knob
7
three hooks
8
front panel assembly
Note:
Follow the disassembly procedure in the numerical order given.
Click on the first or last page to see other AVD-K150B / AVD-K150E / AVD-K150G / AVD-K150N / AVD-K150R / DAV-D150B / DAV-D150E / DAV-D150G / DAV-D150N service manuals if exist.