Sony SAL85F14Z Service Manual ▷ View online
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP32
Adhesive bond (B-10): J-6082-612-A
1.
Apply the adhesive bond (B-10) to the indicated portions of fixed holding tube block.
2.
Install the orange color ring.
Note:
Wipe out the seeped adhesive bond on the fixed holding tube block.
HELP33
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
After applying the adhesive bond (LOCTITE 460) to the indicated portion of mount index, push it in the specified hole of fixed holding
tube block.
Apply the adhesive bond (B-10)
Apply the adhesive bond (B-10)
Orange Color Ring
Fixing Holding Tube Block
Apply the adhesive bond (LOCTITE 460)
Mount Index
Fixed Holding Tube Block
HELP
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
HELP34
Adhesive Bond (B-10): J-6082-612-A
1.
Build in the focus hold button from the outer side of fixed holding tube block. Peel the back paper off the FHB flexible setting tape,
and affix the FHB flexible unit along the inner diameter of fixed holding tube block.
2.
Apply the adhesive bond (B-10) to the indicated portion in figure.
FHB Flexible Unit
Focus Hold Button
FHB Flexible Setting Tape
Fixed Holding Tube Block
Apply the adhesive bond (B-10)
3-1
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
(Note 1)
Be sure avoiding replacement of G1 decoration plate
(Ref No. 10) as far as possible.
If replacement of it should be need, you convey the
message to your user that changing of the “Carl Zeiss
Serial No.” is needed, and then you may obtain user’s
agreement, and it replace.
(Ref No. 10) as far as possible.
If replacement of it should be need, you convey the
message to your user that changing of the “Carl Zeiss
Serial No.” is needed, and then you may obtain user’s
agreement, and it replace.
1
2-693-472-01 RING (G3 STOPPER)
2
2-693-471-01 LENS (G3)
3
2-693-470-01 HOLDER (1ST LENS HOLDER A)
4
2-693-473-01 LENS (G2)
5
2-693-481-01 RING (G2 STOPPER)
6
A-1197-824-
B
BLOCK, TUBE, MIRROR TUBE
(Note 2)
7
2-688-977-01 SCREW (M1.6X3.0)
8
2-693-404-01 LENS (G1)
9
2-693-405-
02
RING (G1 STOPPER)
(Note 2)
10
2-698-304-01 RING (G1 DECORATION PLATE) (Note 1)
3. REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
3-1-1. 1ST BALL FRAME (A) LENS BLOCK AND MIRROR TUBE BLOCK
DISASSEMBLY
NOTE:
•
-XX and -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•
The mechanical parts with no reference number in
the exploded views are not supplied.
the exploded views are not supplied.
Ref. No.
Part No.
Description
2
1
3
4
5
8
9
7
7
10
(See Page 3-2.)
6
(Note 1)
(Note 2)
(Note 2)
Ver. 1.4 2008.01
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
(Note 2)
In case of repairing the mirror tube block or the G1
stopper in the old type, be sure to replace them at the
same time.
stopper in the old type, be sure to replace them at the
same time.
3-2
SAL85F14Z (Planar 1.4/85) (Planar T
*
85mm F1.4 ZA)
A
E
B
C
D
A
E
B
D
C
59
60
58
56
56
54
55
64
57
63
61
62
53
(Note 1)
51
52
(Note 1)
3-1-2. LENS MOUNT BLOCK
DISASSEMBLY
Ref. No.
Part No.
Description
51
Selection Parts COUPLER ADJUSTMENT WASHER A-E (Note 1)
52
2-693-402-01 COUPLER
53
Selection Parts BACK ADJUSTMENT WASHER A-E (Note 1)
54
A-1197-821-A BLOCK, LENS MOUNT
55
A-1197-822-A BLOCK, LENS MOUNT RIVETTING
56
2-693-403-01 SCREW (M2.0X5.5)
57
2-693-369-01 BARREL (REAR LIGHT SHIELD)
Ref. No.
Part No.
Description
58
2-684-064-01 SCREW (M1.4X2.2)
59
2-684-119-01 SCREW (M1.6X2.5)
60
2-684-844-01 CONNECTION BOX
61
2-684-234-01 PRESET RING HOLDING PLATE
62
2-693-468-01 MAIN SP
63
2-693-467-01 LEVER (PRESET RING)
64
2-684-244-01 STOPPER SCREW
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-6.
according to adjustment etc..
Select the part referring to page 3-6.
Click on the first or last page to see other SAL85F14Z service manuals if exist.