Sony SAL75300 Service Manual ▷ View online
HELP
SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)
HELP15
Grease (G-15):
J-6082-619-A
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
J-6082-612-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the grease (G-15) and anti-diffusion agent (A-20) to the instruction part of the helicoid barrel.
2.
Apply the adhesive bond (B-40) to the three guide pins fixing the helicoid barrel.
3.
After the zoom brush position adjustment is completed, apply the adhesive bond (B-10) to the two screws as shown in the figure.
Apply the adhesive bond (B-40) (3 areas)
Apply the adhesive bond (B-10)
Apply the
grease
(G-15)
(Liner groove: 6 areas)
Apply the anti-diffusion agent (A-20)
(All circumference: 10 mm wide)
(All circumference: 10 mm wide)
Apply the anti-diffusion agent (A-20)
(All circumference: 5 mm wide)
(All circumference: 5 mm wide)
HELP
SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)
HELP16
Anti-diffusion agent (A-20): J-6082-611-A
Apply the anti-diffusion agent (A-20) to the instruction part of the 4th moving barrel.
HELP17
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
J-6082-612-A
1.
Apply the anti-diffusion agent (A-20) to the instruction part of the 3rd lens set.
2.
Match the lever of the diaphragm operation plate to the position without projection part of the pressure plate.
3.
After the aperture diameter adjustment is completed, apply the adhesive bond (B-10) to the three screws as shown in the figure.
Apply the
anti-diffusion agent
(A-20)
(All circumference)
Apply the anti-diffusion agent (A-20)
(All circumference)
(All circumference)
Apply the anti-diffusion agent (A-20)
(All circumference)
(All circumference)
Projection part
Apply the anti-diffusion agent (A-20)
(3 areas)
(3 areas)
Apply the adhesive bond (B-10)
Apply the
adhesive bond (B-10)
adhesive bond (B-10)
3-1
SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)
B
A
B
A
5
8
10
4
3
2
2
1
9
11
5
6
5
(See Page 3-2.)
12
(Note 1)
7
(5 x 15 mm)
(Note 2)
(Note 2)
ns
3. REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
3-1-1. BAYONET MOUNT SET
DISASSEMBLY
Ref. No.
Part No.
Description
1
A-1203-894-A TUBE SET, LIGHT INTERCEPTION
2
2-684-064-01 SCREW M1.4X2.2
3
2-684-065-01 GROUND SPRING
4
2-684-066-01 TAPPING SCREW 1.7 M1.7X4.0
5
2-698-464-01 TAPPING SCREW PHI 2 M2X5.5
6
2-684-244-01 STOPPER SCREW
(Note 2)
Cut the adhesive sheet (210x297 mm) (Ref. No. 7) for
5
5
×15 mm.
NOTE:
•
•
-XX and -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•
The mechanical parts with no reference number in
the exploded views are not supplied.
the exploded views are not supplied.
7
2-649-300-01 SHEET,ADHESIVE (Note 2)
8
A-1203-916-A MOUNT SET, BAYONET
9
A-1203-917-A PRESET RING ASSY
10
2-693-468-01 MAIN SPRING
11
2-698-541-01 PRESET RING PRESSURE
12
Selection part
BACK WASHER-A to E (Note 1)
Ref. No.
Part No.
Description
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-6.
according to adjustment etc..
Select the part referring to page 3-6.
Ver 1.1 2007.02
ns: not supplied
3-2
SAL75300 (4.5-5.6/75-300) (75-300mm F4.5-5.6)
C
C
D
D
57
(20 x 30 mm)
(Note 2)
(Note 2)
61
62
63
58
57
(20 x 30 mm)
(Note 2)
(Note 2)
53
52
54
53
59
60
(Note 1)
57
(20 x 30 mm)
(Note 2)
(Note 2)
51
55
56
(See Page 3-3.)
3-1-2. ZOOM BARREL BLOCK
DISASSEMBLY
Ref. No.
Part No.
Description
51
2-698-452-01 ZOOM BARREL RETAINER (-900)(BLACK)
52
2-698-460-01 NAME PLATE (CHINA)
53
2-691-784-01 DIA3 HEAD TAPPING SCREW DIA1.7 M1.7X4.0
54
2-683-692-01 CHIP (MOUNT INDEX)
55
2-698-461-01 ZOOM RUBBER RING
56
2-698-449-01 ZOOM BARREL (-900) (BLACK)
57
9-913-210-03 POLYESTER TAPE (BLACK) 10mm (Note 2)
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-6.
according to adjustment etc..
Select the part referring to page 3-6.
58
2-698-451-01 SUPPORT RING
59
2-684-056-01 COUPLER
60
Selection part
COUPLER ADJUSTMENT WASHER A to E (Note 1)
61
2-698-463-01 SCREW M1.7X3.0
62
2-691-584-01 DIA3 HEAD TAPPING SCREW DIA1.7 M1.7X3.0
63
2-698-454-01 CONNECTING PLATE
Ref. No.
Part No.
Description
(Note 2)
Polyester tape (black) 10mm (Ref. No. 57) for 20
×30 mm.
Click on the first or last page to see other SAL75300 service manuals if exist.