DOWNLOAD Sony SAL70200G (serv.man2) Service Manual ↓ Size: 8.29 MB | Pages: 127 in PDF or view online for FREE

Model
SAL70200G (serv.man2)
Pages
127
Size
8.29 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
sal70200g-sm2.pdf
Date

Sony SAL70200G (serv.man2) Service Manual ▷ View online

HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
5.
Install the stator in the procedure below.
1)
Adjust the red index of mirror tube and the flexible PWB of stator to the locations respectively shown in the figure.
2)
Install the stator, aligning the rotation stopper pin with the stator groove.
Stator
Flexible PWB
of stator
Flexible PWB
of stator
Rotation
Stopper Pin
Red index of mirror tube
Red index of mirror tube
Groove
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP33
When assembling rotor, never touch the resin coated surface (black coated side).
Note 1: 
If touched, wipe the resin coated surface of rotor with paper waste soaked with ethanol.
Note 2:
 The ultrasonic motor malfunctions due to finger grease, resulting in trouble.
   When assembling, wear a finger tip.
HELP34
Grease (G-115):
J-6082-627-A
Grease (G-117):
J-6082-660-A
Apply the grease (G-115) and the following grease (G-A) to the indicated portion of rotor hold ring.
Grease (G-A) - (G-115: G117 = 1 : 2) (Before use, blend and mix well the greases in the ratio mentioned.)
HELP35
Affix the stator hold sheet B to the indicated location of outer tube.
Resin coated side
(Black coated side)
Rotor
Roror Hold Ring
Apply the grease (G-A)
(to all circumferences of bore)
Apply the grease (G-115)
(to all circumferences)
Stator Hold
Sheet B
Stator Hold
Sheet B
Stator Hold Sheet B
Outer Tube
Outer Tube
Rotation Stopper Pin
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
Focus Driving Tube Block
Distance Scale Sheet
Gate of focus 
driving tube block
Index of distance
scale sheet
HELP36
Anti-diffusion agent (A-20):
J-6082-611-A
Grease (G-85):
J-6082-626-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion of focus connect lever.
2.
Apply the grease (G-85) to the indicated portion of focus connect lever.
3.
Thread the focus connect lever in the long groove of outer tube and insert in the cut portion of 2 group move frame tube.
HELP37
Affix the distance scale sheet to the gate of focus driving tube block, aligning the index of distance scale sheet with the position where it is
behind one division.
Focus Driving Tube Block
and Distance Scale Sheet
Apply the grease (G-85)
Apply the anti-diffusion agent (A-20)
Focus Connect 
Lever
Focus Connect 
Lever
Long groove of
outer tube
Cutting lack of
2 group move 
frame tube
Focus Driving Tube Block
and Distance Scale Sheet
HELP
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
HELP38
Grease (G-115):
J-6082-627-A
Apply the grease (G-115) to the indicated area of bearing holding ring.
HELP39
Anti-diffusion agent (A-20):
J-6082-611-A
Adhesive bond (B-40): J-6082-614-A
Grease (G-85): J-6082-626-A
1.
Apply two drops of adhesive bond (B-40) to the tips of screw of MF linkage pin.
2.
Apply the anti-diffusion agent (A-20) to the indicated area of MF connection ring.
3.
Apply the grease (G-85) to the indicated area of MF connection ring.
4.
Aligning the MF linkage pin with the concave of MF operation ring.
Apply the grease (G-115)
Bearing Holding Ring
MF Connection 
Ring
MF Connection 
Ring
Concave portion of
MF operation ring
MF Linkage Pin
MF Linkage Pin
Inside
Outside
Inside
Outside
MF Linkage 
Pin
Apply the adhesive 
bond (B-40)
Apply the anti-diffusion
agent (A-20)
(All around)
Apply the 
grease (G-85)
(All around)
Apply the adhesive 
bond (B-40)
Cut
view
Cut
view
Page of 127
Display

Click on the first or last page to see other SAL70200G (serv.man2) service manuals if exist.