Sony SAL50F14Z Service Manual ▷ View online
2-5
SAL50F14Z (Planar 1,4/50 ZA) (Planar T*50mm F1.4 ZA SSM)
HELP 08
Anti-diffusion agent (A-20): J-6082-611-A
1. Apply anti-diffusion agent (A-20) to the back side of the mount (lens A mount).
Apply anti-diffusion
agent (A-20)
agent (A-20)
Mount (Lens A Mount)
HELP 09
1. While engaging the U-shaped groove of the mount block assy with the Aperture Interlocking Pin, install the mount block assy.
2. Tighten screws (1), (2), (3), and (4) in this order.
2. Tighten screws (1), (2), (3), and (4) in this order.
Mount Block ASSY
Aperture Interlocking Pin
3
4
2
1
U-shaped groove of
Mount Block ASSY
Mount Block ASSY
HELP10
Grease (G-35): J-6082-621-A
1. Apply grease (G-35) to the inner diameter surface of the function ring block assy.
Apply grease
(G-35)
(G-35)
Function Ring
Block ASSY
Block ASSY
HELP 11
Grease (G-35): J-6082-621-A
1. Apply grease (G-35) to the inner diameter surface and the working face of the rotor interlocking ring.
Apply grease
(G-35)
(G-35)
Rotor Interlocking
Ring
Ring
Inner diameter
Working face
2-6
SAL50F14Z (Planar 1,4/50 ZA) (Planar T*50mm F1.4 ZA SSM)
HELP 12
1. Stick the SSM holding sheet with the R-cut portion of the plate (pressure plate) facing down.
Plate (Pressure Plate)
SSM Holding Sheet
Adhesive surface
R-cut portion
HELP 13
Grease (FT-210): 9-913-200-37
1. Dip the spring in grease (FT-210).
2. Install the spring with its burr side facing down so that the ridge of the spring comes to the center of the flexible board.
2. Install the spring with its burr side facing down so that the ridge of the spring comes to the center of the flexible board.
Flexible Board
Flexible Board
Spring
Spring
Apply grease
(FT-210)
(FT-210)
Ridge
HELP 14
Bond (B-10) : J-6082-612-A
1. Install the SSM holding plate while matching its cutouts with the focus stopper pins.
2. Turn the SSM holding plate counterclockwise about 30 degrees.
2. Turn the SSM holding plate counterclockwise about 30 degrees.
Focus Stopper Pins
about 30
SSM Holding Plate
3. Apply bond (B-10) to fix the focus stopper pins, SSM holding plate, and straight moving barrel.
Focus Stopper Pin
SSM Holding
Plate
Plate
Apply grease
(B-10)
(B-10)
Straight Moving
Barrel
Barrel
HELP 15
Grease (FT-210): 9-913-200-37
1. Apply grease (FT-210) to the indicated portion of the front ring.
Apply grease
(FT-210)
(FT-210)
Front Ring
2-7
SAL50F14Z (Planar 1,4/50 ZA) (Planar T*50mm F1.4 ZA SSM)
HELP 16
1. Install the protection sheet 2 and protection sheet 3 with their glossy surfaces facing up.
Protection Sheet 3
Protection Sheet 2
Glossy surface
Glossy surface
HELP 17
Grease (FT-210): 9-913-200-37
Grease (G-15): J-6082-619-A
Grease (G-15): J-6082-619-A
1. Apply grease (FT-210) and grease (G-15) to entire circumference of inner diameter of the MF ring shown below.
MF Ring
MF Ring
Apply grease (FT-210)
(Entire circumference of inner diameter)
(Entire circumference of inner diameter)
Apply grease (FT-210)
(Entire circumference of inner diameter)
(Entire circumference of inner diameter)
Apply grease (FT-210)
(Entire circumference of inner diameter)
(Entire circumference of inner diameter)
Apply grease (G-15)
(Entire circumference of inner diameter)
(Entire circumference of inner diameter)
Apply grease (G-15)
(Entire circumference of inner diameter)
(Entire circumference of inner diameter)
Cross section
Cross section
HELP 18
Grease (G-85): J-6082-626-A
Grease (G-35): J-6082-621-A
Grease (G-35): J-6082-621-A
1. Apply grease (G-85) and grease (G-35) to the indicated portions of the MF interlocking ring block assy.
Cross
section
section
Cross
section
section
Apply grease
(G-85)
(G-85)
Apply grease
(G-35)
(G-35)
MF Interlocking Ring
MF Interlocking Ring
HELP 19
1. Attach the Front Lens Barrel so that the mark comes to the position shown below.
Mark
Front Lens Barrel
2-8
SAL50F14Z (Planar 1,4/50 ZA) (Planar T*50mm F1.4 ZA SSM)
HELP 20
Attach the Front Lens Barrel
so that the mark comes to the
position shown below.
so that the mark comes to the
position shown below.
Aperture Interlocking Pin
Aperture Interlocking Pin
2ND Camtube Block ASSY
Cam Tube Block
Hole
HELP 21
Flexible board
Stator ASSY
Stator ASSY
Groove
Groove
Groove
Attach the Stator ASSY so that the flexible
board to the position shown below.
board to the position shown below.
Rotation
Stopper Pins
Stopper Pins
Rotation
Stopper Pin
Stopper Pin
Click on the first or last page to see other SAL50F14Z service manuals if exist.