DOWNLOAD Sony SAL50F14 Service Manual ↓ Size: 1001.54 KB | Pages: 45 in PDF or view online for FREE

Model
SAL50F14
Pages
45
Size
1001.54 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
sal50f14.pdf
Date

Sony SAL50F14 Service Manual ▷ View online

4-18
SAL50F14 (1.4/50) (50mm F1.4)
4-6-2. Focus Brush Position Adjustment and Pattern Check
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Adhesive bond (B-10)
• Lens Adjustment Program
Note:
Lens Adjustment Program is downloadable from the ESI homepage.
1. Focus Brush Position Adjustment
1)
Remove the hold sheet, hold sheet tape and brush hole cover, and loosen the two screws fixing the focus brush.
Fig. 4-6-5
2)
Set the focus position to infinity end.
3)
Perform the “4-6-1. Focus Brush Position Check”, and adjust the focus brush position until the OK (Green) indicator of “Position”
lights.
Fig. 4-6-6
4)
Tighten the two screws loosened in step 1).
Hold Sheet
Hold Sheet Tape
Brush Hole Cover
Focus Brush
Two screws
Ver. 1.4  2010.02
The changed portions from
Ver. 1.3 are shown in blue.
4-19
SAL50F14 (1.4/50) (50mm F1.4)
2. Pattern Check
Note:
When the NG (Red) indicator of “Position” lights during checking, does not care about it (It is normal performance).
1)
Turn the focus ring slowly from the near end “Focus Pattern : 1” to the infinity end “Focus Pattern : 27” and check that the value of
“Focus Pattern” change from 1 to 27 continuously.
2)
Turn the focus ring slowly from the infinity end “Focus Pattern : 27” to the near end “Focus Pattern : 1” and check that the value of
“Focus Pattern” change from 27 to 1 continuously.
Fig. 4-6-7
3)
Click the 
[Exit]
 button.
4)
Click the 
[End]
 button to terminate the lens adjustment program.
5)
Turn the POWER switch of the camera to OFF.
6)
After the pattern check is completed, apply the adhesive bond (B-10) as shown in Fig. 4-6-8.
Fig. 4-6-8
h
h
h
h
h
Hold Sheet
Brush Hole Cover
Apply the adhesive bond (B-10)
Focus Brush
Hold Sheet Tape
Hold Sheet Tape
Ver. 1.4  2010.02
The changed portions from
Ver. 1.3 are shown in blue.
4-20
SAL50F14 (1.4/50) (50mm F1.4)
4-7.
ERROR CODE LIST
Error code
Description
Corrupt Data
Zoom/focus data of check pattern is out of sync with the number of check pattern.
Error, No Lens
Lens is not connected correctly.
Error, Unknown Lens
Unidentified lens is connected.
Communication Error,
Code#:E600
Communication error with the camera
Code#:F000
Input data error to DLL file
Code#:F100
Setting error of USB port
Code#:2531
Communication error of main signal on the camera
[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]
Printing a text
1. Click the Print button 
.
2. Specify a printer, print range, number of copies, and other op-
tions, and then click [OK].
Application of printing:
To set a range to be printed within a page, select the graphic
selection tool 
 and drag on the page to enclose a range to
be printed, and then click the Print button.
Finding a text
1. Click the Find button 
.
2. Enter a character string to be found into a text box, and click
the [Find]. (Specify the find options as necessary)
Application to the Service Manual:
To execute “find” from current page toward the previous pages,
select the check box “Find Backward” and then click the
“Find”.
3. Open the find dialog box again, and click the [Find Again] and
you can find the matched character strings displayed next.
(Character strings entered previously are displayed as they are
in the text box.)
Application to the Service Manual:
The parts on the drawing pages (block diagrams, circuit dia-
grams, printed circuit boards) and parts list pages in a text
can be found using this find function. For example, find a
Ref. No. of IC on the block diagram, and click the [Find Again]
continuously, so that you can move to the Ref. No. of IC on
the circuit diagram or printed circuit board diagram succes-
sively.
Note:
The find function may not be applied to the Service
Manual depending on the date of issue.
Switching a page
• To move to the first page, click the 
.
• To move to the last page, click the 
.
• To move to the previous page, click the 
.
• To move to the next page, click the 
.
Reversing the screens displayed once
• To reverse the previous screens (operation) one by one, click
the 
.
• To advance the reversed screens (operation) one by one, click
the 
.
Application to the Service Manual:
This function allows you to go and back between circuit dia-
gram and printed circuit board diagram, and accordingly it
will be convenient for the voltage check.
Moving with link
1. Select either palm tool 
, zoom tool 
, text selection tool
, or graphic selection tool 
.
2. Place the pointer in the position in a text where the link exists
(such as a button on cover and the table of contents page, or
blue characters on the removal flowchart page or drawing page),
and the pointer will change to the forefinger form 
.
3. Then, click the link. (You will go to the link destination.)
Moving with bookmark:
Click an item (text) on the bookmark pallet, and you can move
to the link destination. Also, clicking 
 can display the
hidden items.
(To go back to original state, click 
)
Zooming or rotating the screen display
“Zoom in/out”
• Click the triangle button in the zoom control box to select the
display magnification. Or, you may click 
 or 
 for zoom-
ing in or out.
“Rotate”
• Click rotate tool 
, and the page then rotates 90 degrees each.
Application to the Service Manual:
The printed circuit board diagram you see now can be changed
to the same direction as the set.
Toolbar
Page of 45
Display

Click on the first or last page to see other SAL50F14 service manuals if exist.