Sony SAL500F80 Service Manual ▷ View online
2-2
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
2-1.
DISASSEMBLY
2-1-1. FOCUS CONNECT RING, OUTER BARREL ASSY AND MOUNT BLOCK
EXPLODED VIEW
FLANGE BACK
ADJUSTMENT
ADJUSTMENT
FLANGE BACK
ADJUSTMENT
ADJUSTMENT
Note: Attach the focus connect ring, outer barrel assy, gear block, mount block,
and filter tentatively when adjusting the flange back.
and filter tentatively when adjusting the flange back.
INNER GEAR POSITION
ADJUSTMENT
ADJUSTMENT
2 Signal PC Board
3 Ground (SP)
7 Gear Block
1 Filter
B
B
C
D
C
D
A
A
8 Inner Gear
9 Focus
Connect Ring
Connect Ring
Focus Hold
Button
Button
6 Outer Barrel Assy
Distance Scale
Plate
Plate
Main Flexible Unit
4 Rear Light
Shield Barrel
Shield Barrel
5 Mount Block
Mount Index
HELP01
HELP03
HELP05
HELP04
HELP06
HELP02
HELP08
HELP08
HELP09
HELP07
2-3
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
2-1-2. HELICOID UNIT
6 G6 Lens
4 G1 Lens Holder
5 G2+G4+G5 Assy
3 G1+G3+G7 Assy
G2 Lens Holder
G2 Stopper
EXPLODED VIEW
OPTICAL AXIS
CHECK/ADJUSTMENT
CHECK/ADJUSTMENT
Note: Always perform the optical axis check/adjustment when the
lens is removed.
lens is removed.
OPTICAL AXIS
CHECK/ADJUSTMENT
CHECK/ADJUSTMENT
HELP13
HELP11
HELP10
HELP12
HELP14
1 Focus Rubber Ring
2 G1 Adjustment
Screw
Screw
G1 Stopper
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP
Note for assembling and grease applying positions are shown.
HELP01
Adhesive bond (B-40): J-6082-614-A
1.
Attach the rear light shield barrel. Apply the adhesive bond (B-40) to the three screws, and then fix the rear light shield barrel with
these screws as shown in the figure.
2.
Attach the ground spring to the rear light shield barrel.
3.
Attach the signal PC board, and fix it with the two screws as shown in the figure.
Note:
Be careful not to tighten the two screws too much.
Apply the Adhesive Bond
(B-40) (Three areas)
(B-40) (Three areas)
Signal PC Board
Screws
Ground spring
Rear Light Shield Barrel
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP02
Adhesive bond (LOCTITE 460)(Note)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Apply the adhesive bond (LOCTITE 460) to the instruction portion of the light shield plate as shown in the figure, and affix it to the rear
light shield barrel.
Rear Light Shield Barrel
Light Shield Plate
Apply the Adhesive Bond (LOCTITE 460)
Click on the first or last page to see other SAL500F80 service manuals if exist.