Sony SAL35F14G Service Manual ▷ View online
4-6
SAL35F14G (1.4/35G) (35mm F1.4G)
4)
The menu to tell that the wizard is ready to install appears. Click
[Install]
.
Fig.4-1-11
5)
The installation is completed. Click
[Finish]
.
Note:
To refer to the “readme” file, check the “Show the readme file” and click
[Finish]
.
Fig.4-1-12
6)
To make the configuration installed effective, the window to prompt the restart appears.
Click “Yes” to restart the PC.
Note:
If a device is connected without restarting, the program may not work properly.
Fig.4-1-13
4-7
SAL35F14G (1.4/35G) (35mm F1.4G)
7)
After restarting the PC, insert the PC-CARD-DIO48 in the PC card slot.
8)
The software installation window appears.
Click “Install the software automatically. (Recommended)”.
Fig.4-1-14
9)
The software is detected and installed. When the window below appears, click
[Finish]
to terminate the installation.
Fig.4-1-15
4-8
SAL35F14G (1.4/35G) (35mm F1.4G)
3. Confirmation of PC card setting
1)
Select “All programs” - “MeasumentComputing” - “InstaCal” from the startup menu, and start up the software.
Note:
Depending on the Windows setting, the window below may differ.
Fig.4-1-16
2)
When “PC-CARD-DIO48” is detected, the window below appears. Confirm that the PC-CARD-DIO48” is checked.
Note:
Depending on the slot inserted, the slot No. differs.
Fig.4-1-17
3)
Confirm that “PC-CARD-DIO48” is recognized as “Board#0”.
Note:
If not recognized as “Board#0”, the program does not work properly.
Fig.4-1-18
4)
Click “File” - “Exit” to terminate “InstaCal”.
4-9
SAL35F14G (1.4/35G) (35mm F1.4G)
4. Startup of Lens Adjustment Program (ActuatorChecker.exe)
1)
Download the file “ActuatorChecker VerX.X.X.X.zip” from Service Fixture and Software of ESI homepage, save and extract it.
2)
Start up “ActuatorChecker.exe” from an arbitrary folder.
3)
If “PC-CARD-DIO48” is properly installed, the window below appears.
Note:
The version of “ActuatorCheker” might be updated.
Fig.4-1-19
Click on the first or last page to see other SAL35F14G service manuals if exist.