Sony SAL35F14G Service Manual ▷ View online
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP20
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Apply the adhesive bond (LOCTITE 460) to the tip of mount index and install it to the outer barrel and G decoration ring.
HELP21
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Adhesive bond (B-10): J-6082-612-A
1.
Apply a little amount of the adhesive bond (LOCTITE 460) to the indicated portions of focus hold button base.
2.
Apply the adhesive bond (B-10) to the tip of one screw shown in figure and tighten the screw.
3.
Perform “4-8. FOCUS HOLD BUTTON CHECK (FOCUS HOLD BUTTON)”.
ft
m
Mount Index
Apply the adhesive bond (LOCTITE 460)
to the tip of mount index
to the tip of mount index
Outer Barrel and G Decoration Ring
Focus Hold Button Base
Click Plate
Dust Proofing Tape
Focus Hold Button
Washer
Apply the adhesive bond (B-10)
Apply the adhesive bond (LOCTITE 460)
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP22
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to all circumferences of indicated portions.
2.
Apply the ant anti-diffusion agent (A-20) to all circumferences of 2 group lens block.
HELP23
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-10):
J-6082-612-A
1.
After the optical axis adjustment (Refer to 4-22 page), apply the adhesive bond (B-10) to the indicated portion of G10 stopper.
2.
Apply the anti-diffusion agent (A-20) as shown in figure.
G4
G5
G6
2 Group Lens Block
2nd Moving Frame
Apply the anti-diffusion agent (A-20) to all
circumference of shaded portion.
circumference of shaded portion.
Apply the anti-diffusion agent (A-20) to all
circumference of shaded portion.
circumference of shaded portion.
Apply the anti-diffusion
agent (A-20)
agent (A-20)
G7
G8
G9
G10
Apply the adhesive bond (B-10)
G10 Stopper
3 Group Lens Block
Apply the anti-diffusion
agent (A-20)
agent (A-20)
Ver 1.2 2007.06
3-1
SAL35F14G (1.4/35G) (35mm F1.4G)
3. REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
3-1-1. DECORATION RING AND MIRROR BARREL TUBE BLOCK
DISASSEMBLY
Ref. No.
Part No.
Description
1
2-684-732-01 RING (DECORATION RING)
2
2-887-838-01 LABEL, ORNAMENTAL RING
3
2-684-731-01 SCREW M1.6X3.5
4
2-684-730-01 WASHER
5
A-1191-451-A BLOCK, MIRROR BARREL TUBE
6
2-684-737-01 NAME PLATE 3514
7
2-684-073-01 LENS NO. PLATE
8
2-695-837-01 LABEL, MODEL NAME
NOTE:
•
-XX and -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•
The mechanical parts with no reference number in
the exploded views are not supplied.
the exploded views are not supplied.
1.4/35G
(See Page 3-6.)
(See Page 3-6.)
(See Page 3-2.)
1
2
5
4
4
3
4
3
A
A
8
7
6
Ver 1.2 2007.06
3-2
SAL35F14G (1.4/35G) (35mm F1.4G)
SONY
(See Page 3-3.)
C
E
D
D
A
F
A
69
52
(Note 2)
(10
×
45mm)
67
67
74
71
70
(Note 3)
52
(Note 2)
(10
×
25mm)
51
B
53
54
55
54
51
51
56
57
58
59
60
(Note 1)
(Note 1)
(See Page 3-5.)
(See Page 3-3.)
B
61
61
62
62
63
64
65
66
65
67
68
72
73
C
F
E
52
(Note 2)
(10
×
25mm)
52
(Note 2)
(10
×
35mm)
ns
3-1-2. LENS MOUNT RIVETING BLOCK AND REAR LIGHT SHIELD BARREL
DISASSEMBLY
Ref. No.
Part No.
Description
51
2-684-064-01 SCREW M1.4X2.2
52
9-913-210-03 POLYESTER TAPE (BLACK) 10mm (Note 2)
53
2-684-736-01 TUBE (REAR LIGHT SHIELD BARREL)
54
2-687-685-01 SCREW M2X4.0
55
A-1191-450-A BLOCK, LENS MOUNT RIVETING
56
2-684-244-01 STOPPER SCREW
57
2-684-856-01 RING (PRESET RING)
58
2-684-233-01 MAIN SPRING
59
2-684-234-01 PRESET RING HOLDING PLATE
60
Selection Parts BACK ADJUSTMENT WASHER A-E (Note1)
61
2-687-690-01 SCREW M1.6X3.0
62
2-684-782-01 SEMIOVAL SCREW M1.6X3.5
Ref. No.
Part No.
Description
(Note 2)
Cut the polyester tape (black) 10mm (per roll) (Ref.
No. 52) for specified size.
No. 52) for specified size.
63
2-689-961-01 RING (CINNABAR)
64
2-684-740-01 SHEET (HOLD SHEET)
65
2-684-738-01 TAPE (HOLD SHEET TAPE)
66
2-684-739-01 COVER (BRUSH HOLE COVER)
67
2-684-774-01 SCERW M1.4X2.0
68
2-684-786-01 CONTACT CHIP (FOCUS BRUSH)
69
2-684-775-01 PLATE (FOCUS SCALE PLATE)
70
2-649-300-01 SHEET, ADHESIVE (Note 3)
71
2-684-773-01 PLATE (CAM RING SUPPORT PLATE)
72
2-684-784-01 COUPLER
73
Selection Parts COUPLER ADJUSTMENT WASHER A-E (Note 1)
74
2-684-735-01 GROUND SPRING
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-7.
according to adjustment etc..
Select the part referring to page 3-7.
ns: not supplied
(Note 3)
Cut the adhesive sheet (Ref. No. 70) for width of 6mm,
affix this by combining both end of adhesive sheet by 5
to 10mm.
affix this by combining both end of adhesive sheet by 5
to 10mm.
Click on the first or last page to see other SAL35F14G service manuals if exist.