Sony SAL35F14G Service Manual ▷ View online
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP02
Adhesive bond (B-10):
J-6082-612-A
Universal wrench:
J-6082-609-A
Chip-A for universal wrench: J-6082-609-1
Chip-B for universal wrench: J-6082-609-2
Note:
Select the chip-A or chip-B for usage.
After applying the adhesive bond (B-10) to the indicated portion, tighten the decoration ring with the universal wrench.
Apply the adhesive bond (B-10) in width 10mm.
Decoration Ring
G1 Lens
Mirror Barrel Tube Block
Ver 1.2 2007.06
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP03
Adhesive bond (B-40): J-6082-614-A
1.
Align the ring positioning pin of the mirror barrel tube block to U groove of the fixed barrel, attach them.
2.
Apply the adhesive bond (B-40) to 3 screws shown in figure and tighten the screws.
Mirror Barrel Tube Block
Ring Positioning Pin
1 Group Lens Block
U Groove
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP04
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to 5 screws shown in figure and tighten the screws.
HELP05
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-85):
J-6082-626-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portions of lens A mount.
2.
Apply the grease (G-85) to 3 locations of indicated portion3 (3 locations) of lens A mount.
3.
Apply the adhesive bond (LOCTITE 460) to the stopper screw and attach it to the lens A mount.
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Rear Light Shield Barrel
Lens A Mount
Apply the grease (G-85) to 3 locations of
indicated portion.
indicated portion.
Apply the anti-diffusion agent (A-20)
to all circumferences of indicated Portion.
to all circumferences of indicated Portion.
Apply the adhesive bond (LOCTITE 460)
Stopper Screw
Apply the grease (G-85) (rear side)
HELP
SAL35F14G (1.4/35G) (35mm F1.4G)
HELP06
Oil (O-20): J-6082-610-A
Apply small amount of oil (O-20) to the instruction portion of the main spring.
HELP07
Adhesive bond (B-40):
J-6082-614-A
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion of outer barrel and G decoration ring.
2.
Apply the adhesive bond (B-40) to 4 screws shown in figure and tighten the screws.
3.
Lay out the DV-FH Flexible properly.
Aplly small amount(O-20)(On contact area)
Connector
DV-FH flexible
DV-FH Flexible
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the anti-diffusion agent (A-20) to
all circumferences of indicated portions.
all circumferences of indicated portions.
Apply the anti-diffusion agent (A-20) (inside) to
all circumferences of indicated portions.
all circumferences of indicated portions.
Apply the anti-diffusion agent (A-20)
Mount Index
Outer Barrel and G Decoration Ring
Outer Barrel
G Decoration Ring
Click on the first or last page to see other SAL35F14G service manuals if exist.