DOWNLOAD Sony SAL24105 Service Manual ↓ Size: 2.45 MB | Pages: 97 in PDF or view online for FREE

Model
SAL24105
Pages
97
Size
2.45 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
sal24105.pdf
Date
PREV: Sony SAL135F18Z (serv.man5) Service Manual

Sony SAL24105 Service Manual ▷ View online

1-5
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
Check the operation
again.
Replace the defective part
or apply the grease.
OK
NG
OK
OK
OK
OK
Function NG
Position NG
Focus trouble
Replace the defective part
or apply the grease.
Check the AF coupler
and gear shaft of the
gear (C, D) block
Check the focus cam
tube and focus joint tube.
NG
NG
NG
NG
NG
END
OK
Check the position
and deformation 
at the tip of
the focus brush.
Check the position, or
replace the focus brush.
Check board pattern
of the focus flex pattern.
Clean the board pattern.
Replace the main flexible
PC board block.
Perform the 
 focus brush position
check/adjustment and
pattern check.
(See page 4-38.)
1-5-3. Focus Trouble
2-1
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
2. DISASSEMBLY
Cut and remove the part of gilt 
which comes off at the point.
(Be careful or some 
pieces of gilt may be left inside) 
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, dont’ pull at wire of connector. It is possible that a wire is snapped.
• When installing a connector, dont’ press down at wire of connector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
UNIVERSAL WRENCH
In case of the following notches or holes are located in the lens block, etc during disassembling/
assembling the lens, Use the universal wrench.
How to Use
Attach the chip-A or chip-B to the universal wrench.
For the notches: chip-A
For the holes:
chip-B
Match the universal wrench to the holes or notches of the lens block, etc.
Notches
Holes
Universal wrench
J-6082-609-A
Chip-A for 
universal wrench:
J-6082-609-1
Chip-B for 
universal wrench:
J-6082-609-2
Notches
Chip-A
Chip-A
Chip-B
Chip-B
Chip
Chip
Match the universal wrench 
to the width of holes or notches.
Universal wrench
Holes
Ver 1.1  2006.12
2-2
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
2-1.
DISASSEMBLY
2-1-1. LENS MOUNT BLOCK AND OUTER COVER
!]
 Lens Mount Block
!-
 Main Board Block
9
 Zoom Hold Ring
4
 Zoom Rubber Ring
1
 Decoration Plate
5
Zoom Ring Reinforcement 
Plate
0
 Torque Adjustment Rubber
!\
2
Focus Scale Window 
Unit
3
 Outer Cover
Polyester Tape (Black) 10mm
Decoration Cover
Set Tape B
Coupler Adjustment Washer
Decoration Cover Set Tape
7
 Zoom Brush
Gear (C, D) Block
AF Coupler Shaft
6
 Brush Cover
![
 Rear Light Shield Barrel
!=
 Ground Spring
Main SP
Guide Riveting Block
Stopper Screw
Main Spring
Mount Index
Preset Ring Guide Assy
Preset Ring Holding Plate
Back Adjustment
Washer
8
 Lens No. Plate
HELP07
HELP05
HELP05
HELP06
HELP01
HELP03
HELP02
HELP02
HELP08
HELP05
HELP02
Note: 
As the outer cover
is fragile, handle 
it with caution.
FLANGE BACK ADJUSTMENT
FLANGE BACK
ADJUSTMENT
ZOOM BRUSH POSITION
ADJUSTMENT
HELP04
HELP09
B
C
C
B
A
A
EXPLODED VIEW
2-3
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
2-1-2. FIRST MOVING FRAME AND 1ST LENS BARREL HOLDER
8
 Torque Ring
3
Focus Rubber 
Ring
4
5
7
 Focus Ring B
6
 Torque Ring Spring
2
 4 group Lens Block
Light Shield
Plate B
G3-4 Adjustment
Washer
1st Moving Frame
Guide Roller
1st Lens Barrel 
Guide Roller
First Moving
Frame
Friction Sheet
Screw (Nut)
1st Lens Barrel
Guide Pin
Torque Hold Ring
MF Operation Ring
Pinch Lever Shaft
Scratch Prevention Sheet
Pinch Lever
Pinch Lever B
Nut B
1 Group Lens 
Block
1st Moving 
Frame Guide Pin
HELP24
HELP23
HELP13
HELP14
HELP12
HELP15
HELP14
HELP14
HELP16
HELP13
HELP17
HELP11
HELP20
HELP18
HELP21
HELP19
HELP22
A
A
1st Moving Frame 
Guide Spring
EXPLODED VIEW
1
 4th Lens
     Hold Washer
HELP10
HELP46
Page of 97
Display

Click on the first or last page to see other SAL24105 service manuals if exist.

RANDOM: