Sony SAL24105 Service Manual ▷ View online
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP28
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-60):
J-6082-616-A
Grease (G-85):
J-6082-626-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion (entire circumference) shown in the figure.
2.
Apply the adhesive bond (B-60) to the position of focus ring shown in the figure.
3.
Affix the focus inner gear, aligning its boss hole with the boss of focus ring.
4.
Affix the polyester tape (black) 10mm of size shown in the figure to the position shown in the figure.
Apply the grease (G-85) to the indicated portion shown in the figure.
Apply the anti-diffusion agent (A-20)
Focus Ring
Apply the adhesive bond (B-60)
Boss
Focus Ring
Focus Ring
Focus Inner Gear
Boss Hole
Focus Ring
Focus Ring Gear
Apply the grease (G-85)
Polyester Tape (Black) 10mm (5x10mm)
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
5.
Fix the focus inner gear and the focus ring with the clip.
HELP29
Winding the focus scale tube around the focus ring, affix it with the polyester tape (black) 10mm.
Note:
To adjust the focus scale plate position, make the focus scale plate to rotate.
HELP30
1.
Set the focus cam tube block to the Wide end by rotating it counterclockwise, and set the zoom ring to the Wide end.
2.
Insert the linear guide key A and linear guide key B in the key groove of focus cam tube block.
Clip
Note: After fixing, clip them with a clip and
leave it for eight hours.
Focus Ring
Focus Inner Gear
Fucus Scale Plate
Focus Ring
Polyester Tape (Black) 10mm (8x25mm)
Focus Cam Tube Block
Key Groove
Key Groove
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP31
1.
Attach the zoom ring, aligning its projection (near “105”) with the cut portion (cut portion of index block) of fixed holding tube
block.
2.
Rotate counterclockwise the zoom ring a little and tighten the zoom operating pin, aligning the “U” shaped groove with the screw
hole of focus cam tube.
24
Cut Portion
Projection
105
Zoom Ring
Screw Hole of Focus
Cam Tube
Cam Tube
U Shaped
Groove
Zoom Ring
Fixed Holding Tube Block
Index Block
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP32
Grease (G-85):
J-6082-626-A
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion shown in the figure.
2.
Apply the grease (G-85) to the indicated portion (side of lead groove of indicated inner portion) of zoom ring.
HELP33
Grease (G-85): J-6082-626-A
Apply the grease (G-85) to the indicated portion of fixed holding tube block.
Note:
Do not apply the grease to the 1/2 area of cam groove near the main flexible PC board block and the slider groove of zoom ring at
the lower side of main flexible PC board block.
Apply the grease (G-85)
Apply the anti-diffusion agent
(A-20)
(A-20)
Zoom Ring
Pin (Zoom Operating Pin)
Fixed Holding Tube Block
Apply the grease (G-85)
Apply the grease (G-85)
Click on the first or last page to see other SAL24105 service manuals if exist.