Sony SAL20TC Service Manual ▷ View online
HELP
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
Note for assembling and grease applying positions are shown.
HELP01
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the three screws and the rear light shield barrel is installed.
HELP02
Grease (G-85): J-6082-626-A
Grease (G-35): J-6082-621-A
Apply the grease (G-35) and (G-85) to the instruction part of the coupler.
HELP
Apply the adhesive bond(B-40)
Rear Light Shield Barrel
Apply the grease(G-85)
Connect Ring
Apply the grease(G-35)
HELP
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
HELP03
Grease (G-85): J-6082-626-A
Apply the grease (G-85) to the instruction part of the ring spring.
HELP04
Oil (O-20): J-6082-610-A
1.
Apply the oil (O-20) to over the main spring.
2.
Attach the main SP in figure.
HELP05
Anti-diffusion agent (A-20): J-6082-611-A
Apply the anti-diffusion agent (A-20) to both inside and outside the instruction part of the connect ring.
Apply the grease(G-85)
Ring Spring
Body A Mount
Main Spring Hook (B)
Main Spring
Main Spring Hook (B)
Main Spring
Apply the oil(O-20)
Main Spring Hook (A)
Connect Ring
Apply the anti-diffusion agent(A-20)
Connect Ring
Ver 1.1 2007.01
HELP
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
HELP06
Adhesive bond (LOCTITE 460)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
Apply the adhesive bond (LOCTITE 460) to the instruction part of the mount index.
HELP07
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to spread on the screw with four screws, and the installation of the preset lever in figure.
HELP08
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the instruction part of the main spring hook B spring hanger.
Apply the adhesive bond (LOCTITE 460)
Mount Index
Connect Ring
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Preset Lever
Preset Ring
Preset Lever B
Apply the adhesive bond (B-40)
Preset Lever
Preset Lever B
Preset Ring
Main Spring Hook (B)
HELP
SAL20TC (2x TELE CONVERTER) (2 X Teleconverter)
HELP09
Grease (G-35):
J-6082-621-A
Grease (G-85):
J-6082-626-A
Adhesive bond (B-40): J-6082-614-A
1.
Aplly the grease (G-35) and (G-85) to the gear base block.
2.
Apply the adhesive bond (B-40) to four screws in figure.
HELP10
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the instruction part of the four screws.
HELP11
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the instruction part of the two screws in figure.
Apply the grease (G-35)
Apply the grease (G-85)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Fixed Barrel
Apply the adhesive bond (B-40)
Ground Spring A
BL Contact Holding Block
Click on the first or last page to see other SAL20TC service manuals if exist.