Sony SAL18135 Service Manual ▷ View online
2-4
SAL18135 (3.5-5.6/18-135 SAM) (DT18-135mm F3.5-5.6 SAM)
HELP05
1. Attach the focus rubber ring (8948) so that its convex comes to the mount side.
Focus Rubber Ring (8948)
Convex
HELP06
Grease (FT-210): 9-913-200-37
1. Apply grease (FT-210) to the gear part of the Focus Interlock Ring (8948).
2. Install the focus joint ring assy to the unit while inserting the lever of the focus joint plate (8948) into the groove of the 2nd group
2. Install the focus joint ring assy to the unit while inserting the lever of the focus joint plate (8948) into the groove of the 2nd group
movement frame.
Focus Interlock Plate Assy
Focus Interlock Ring (8948)
Apply the grease
(FT-210)
(FT-210)
Groove of the 2 Group Moving Frame
Gear part
Lever of the Focus
Interlock Plate (8948)
Interlock Plate (8948)
HELP07
Bond (B-10) : J-6082-612-A
1. Set the unit to the TELE end, install the brush (8948), and secure it with a screw.
Note:
Note:
Set the brush (8948) at the position of the LF-145 flexible board ZM-AFM8948 (8948) pattern referring to the figure.
2. After
performing 4-7-3. Zoom Pattern Inspection , apply the adhesive bond (B-10) to the head of screw.
PWB (ZM-AFM8948),
LF-145 FLEX
LF-145 FLEX
PWB (ZM-AFM8948),
LF-145 FLEX
LF-145 FLEX
Apply the bond
(B-10)
(B-10)
Brush (8948)
Brush (8948)
Z Brush Plate (8948)
HELP08
Grease (G-85): J-6082-626-A
Grease (G-118): J-6082-680-A
Grease (G-118): J-6082-680-A
1. Apply the grease (G-85) to the indicated portion of center barrel assy.
Note:
Note:
Avoid applying the grease outside in the application-prohibited areas.
2. Apply the grease (G-118) to the indicated portion of center barrel assy.
Center Barrel Assy
Center Barrel Assy
Apply the grease
(G-85)
(G-85)
Apply the grease
(G-85)
(G-85)
Apply the grease
(G-85)
(G-85)
Apply the grease
(G-118)
(G-118)
Application-prohibited areas
2-5
SAL18135 (3.5-5.6/18-135 SAM) (DT18-135mm F3.5-5.6 SAM)
HELP09
1. Extend the 1st group movement frame to the position shown in the figure below.
2. While passing the LF-145 flexible board ZM-AFM8948 (8948) through the hole in the middle barrel assy, install the middle barrel assy
2. While passing the LF-145 flexible board ZM-AFM8948 (8948) through the hole in the middle barrel assy, install the middle barrel assy
and the zoom ring assy to the unit.
3. Set the zoom ring assy to a focal length of 35 mm and extend the 1st group outer barrel assy and the 1st group movement frame to the
position shown in the figure below to align the zoom ring assy hole with the zoom pin screw hole.
4. Tighten two zoom pins.
1st Outer Barrel Assy
Center Barrel Assy
Zoom Ring Assy
Zoom ring assy hole and
zoom pin screw hole
zoom pin screw hole
PWB (ZM-AFM8948),
LF-145 FLEX
LF-145 FLEX
Hole
Zoom Ring Assy
1 st Moving Frame
Zoom Pin
Zoom Pin
1 st Moving Frame
HELP10
1. Align the opening of the 1st group outer barrel assy with the opening of the 3rd movement barrel assy, and then install the 1st group
outer barrel assy to the optical assy while inserting the two projections of the 1st group outer barrel assy into the two grooves of the re-
tainer ring.
tainer ring.
2. Tighten three screws.
1st Outer Barrel Assy
Stationary Barrel
Optical Assy
Projection
Grooves
Grooves
Opening
Opening
3-1
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
SAL18135 (3.5-5.6/18-135 SAM) (DT18-135mm F3.5-5.6 SAM)
3. REPAIR PARTS LIST
NOTE:
• -XX and -X mean standardized parts, so they may have some differ-
• -XX and -X mean standardized parts, so they may have some differ-
ence from the original one.
• Items marked * are not stocked since they are seldom required for
routine service. Some delay should be anticipated when ordering these
items.
• The mechanical parts with no reference number in the exploded views
are not supplied.
3-1. EXPLODED VIEWS
3-1-1. OVERALL SECTION
ns : not supplied
3-1-2. AF GEAR BOX, OUTER BARREL ASSY
ns: not supplied
ns
ns
ns
(See Section 3-1-3)
58
63
62
56
58
59
64
(Note) (10 X 25mm)
57
58
58
66
52
51
51
53
56
ns
61
65
60
54
55
56
(Note)
The number or type of these parts need
to be selected according to adjustment
etc.
Select the part reffering to page 3-2.
(Note)
これらの部品は調整によって使用個数や種類
を選択する必要があります。
を選択する必要があります。
3-2
ページを参照して選択してください。
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
1
A-1849-451-A CL-037 MOUNT BOARD ASSY
2
4-300-113-11
TAPPING (1.7) (CH)
3
A-1849-450-A REAR
BARREL
ASSY
4
4-294-773-01 CINNABAR
RING
5
Selection Parts BACK WASHER (Note)
6
4-289-826-01
MAIN SPRING (8948)
7
4-300-108-01 M1.7
TORASUTA
(CH)
8
A-1849-432-A MOUNT
BASE
ASSY
9
4-300-117-01 SCREW
(CH)
10
4-289-823-01
REAR COVER BARREL (8948)
11
3-254-135-01 SCREW
(B1.4)
12
A-1849-441-A B/L CONTACT BOX ASSY
13
A-1849-503-A OPTICAL BLOCK FOR SERVICE
14
X-2582-781-1 A FRONT CAP S(DIA.62)
15
2-683-615-01
LENS CAP, REAR
16
4-294-801-01 NAME
PLATE
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
51
4-294-828-01
ZOOM PIN (8948)
52
A-1849-434-A ZOOM
RING
ASSY
53
4-300-120-01
SCREW (M1.4X1.2) (CH)
54
4-294-763-01 BRUSH
(8948)
55
4-294-762-01
Z BRUSH PLATE (8948)
56
4-300-113-11
TAPPING (1.7) (CH)
57
A-1849-436-A CENTER
BARREL
ASSY
58
4-300-115-21
TAPPING (1.7) (CH)
59
4-294-835-01
ZOOM RUBBER RING (8948)
60
4-294-755-01
FOCUS INTERLOCK RING (8948)
61
4-294-796-01
FOCUS RUBBER RING (8948)
62
1-855-128-11
AF GEAR BOX (8948)
63
4-300-117-01 SCREW
(CH)
64
9-913-210-03
POLYESTER TAPE (BLACK) 10mm (Note)
65
A-1849-452-A FOCUS
RING
ASSY
66
4-294-797-01 MF
RING
TAPE
A
A
ns
ns
(See Section 3-1-2)
1
3
14
2
2
2
11
11
11
12
4
2
15
11
9
8
7
ns
6
5
(Note)
5
(Note)
13
7
9
9
16
7
10
(Note)
Cut the polyester tape (black) 10mm (per
roll) (Ref.No. 64) for specified size.
(Note)
ポリエステルテープ
(
ブラック
) 10mm (
ロー
ル
) (
図面番号
64)
は,指定の寸法にカットして
使用してください。
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Ver. 1.2 2015.10
3-2
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
DISASSEMBLY
(ENGLISH)
DISASSEMBLY
(JAPANESE)
SAL18135 (3.5-5.6/18-135 SAM) (DT18-135mm F3.5-5.6 SAM)
Ref. No.
Part No.
Description
101
4-294-834-01
1ST LENS SHEET (8948)
102
4-294-769-01
1ST LENS RING (8948)
103
A-1849-455-A 1ST
LENS
ASSY
104
1-885-230-11
PWB (ZM-AFM8948), LF-145FLEXIBLE
105
4-300-108-01 M1.7
TORASUTA
(CH)
3-1-3. 1ST OUTER BARREL ASSY, 1ST CAM BARREL (8948)
ns: not supplied
101
102
103
104
105
107
106
105
105
3-1-4. SELECTION PARTS
Ref. No.5.
These washers are provided for flange back adjustment.
Change the thickness (t) according to result of adjustment.
Change the thickness (t) according to result of adjustment.
Part No.
Description
4-294-776-01
BACK WASHER (t=0.05)
4-294-776-11
BACK WASHER (t=0.07)
4-294-776-21
BACK WASHER (t=0.1)
4-294-776-31
BACK WASHER (t=0.2)
4-294-776-41
BACK WASHER (t=0.5)
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Ver. 1.2 2015.10
106
A-1849-454-A 1ST OUTER BARREL ASSY
107
A-2076-100-A LENS BLOCK ASSY (SERVICE)
Ref. No.
Part No.
Description
Click on the first or last page to see other SAL18135 service manuals if exist.