Sony SAL16F28 Service Manual ▷ View online
2-1
SAL16F28 (2.8/16 FISH-EYE) (16mm F2.8 Fisheye)
2. DISASSEMBLY
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, dont’ pull at wire of connector. It is possible that a wire is snapped.
• When installing a connector, dont’ press down at wire of connector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
UNIVERSAL WRENCH
In case of the following notches or holes are located in the lens block, etc during disassembling/
assembling the lens, Use the universal wrench.
assembling the lens, Use the universal wrench.
How to Use
Attach the chip-A or chip-B to the universal wrench.
For the notches: chip-A
For the holes:
For the notches: chip-A
For the holes:
chip-B
Match the universal wrench to the holes or notches of the lens block, etc.
When top of tip does not reach holes or notches because the fixed screw becomes obstructive,
replace the fixed screw to below.
+B 3X5 7-682-546-09
replace the fixed screw to below.
+B 3X5 7-682-546-09
Notches
Holes
Universal wrench
J-6082-609-A
J-6082-609-A
Chip-A for
universal wrench:
J-6082-609-1
universal wrench:
J-6082-609-1
Chip-B for
universal wrench:
J-6082-609-2
universal wrench:
J-6082-609-2
Ver 1.2 2007.02
Notches
Chip-A
Chip-A
Chip-B
Chip-B
Chip
Fixed screw
Fixed screw
Chip
Match the universal wrench
to the width of holes or notches.
to the width of holes or notches.
Universal wrench
Holes
2-2
SAL16F28 (2.8/16 FISH-EYE) (16mm F2.8 Fisheye)
2-1.
DISASSEMBLY
2-1-1. OUTER BARREL
1.5
0.5
0.3
0.8
0.7
0.25
0.2
22 16
11
22
16
11
8
8
4
4
∞
EXPLODED VIEW
HELP01
(See Page 2-3.)
HELP03
HELP03
HELP02
HELP03
HELP04
Mount Index
1
Front Ball Group
Lens Block
2
Outer Barrel
FLANGE BACK
ADJUSTMENT
ADJUSTMENT
2-3
SAL16F28 (2.8/16 FISH-EYE) (16mm F2.8 Fisheye)
2-1-2. FRONT LENS BARREL AND FILTER SELECT RING
EXPLODED VIEW
1
Front Lens
Barrel Holder
2
Front Lens
Barrel
3
Filter Select Ring
4
Filter Change
Cam Ring
(See Page 2-4.)
HELP10
HELP10
HELP10
2-4
SAL16F28 (2.8/16 FISH-EYE) (16mm F2.8 Fisheye)
2-1-3. REAR LIGHT SHIELD BARREL, LENS MOUNT RIVETING BLOCK AND INNER BARREL
B
EXPLODED VIEW
B
C
A
A
C
HELP08
HELP05
HELP07
HELP06
HELP07
1
Rear Ball Group
Lens Block
HELP05
HELP07
E
D
E
D
5
Rear Light
Shield Barrel
2
Lens Mount
Riveting Block
6
Priset Ring
9
Inner Barrel
HELP09
(See Page 2-5.)
HELP07
4
Main Flexible Unit
3
Ground Spring
HELP16
8
Gear Base
Plate Rivet Block
7
Coupler
Click on the first or last page to see other SAL16F28 service manuals if exist.