Sony SAL14TC Service Manual ▷ View online
2-2
SAL14TC (1.4x TELE CONVERTER) (1.4 X Teleconverter)
2-1.
DISASSEMBLY
2-1-1. LENS MOUNT BLOCK, LENS BLOCK AND BODY A MOUNT
EXPLODED VIEW
2
Rear Light Shield
Barrel
1
Ground Spring
HELP01
3
Lens Mount
Block
Fitting Tube Block
HELP04
HELP09
HELP05
7
Body A Mount
8
Ring Spring
HELP08
5
Lens
Block
FLANGE BACK
ADJUSTMENT
ADJUSTMENT
HELP03
6
Back
Adjustment
Washer
Washer
(See Page 2-3.)
4
Coupler
!=
Gear Base
Plate Block
!-
Lock Pin
0
Lever Base
Plate Unit
9
Lock Holding
Lever Block
HELP07
HELP06
HELP02
2-3
SAL14TC (1.4x TELE CONVERTER) (1.4 X Teleconverter)
2-1-2. CONNECT BAREL AND FIXED BARREL
EXPLODED VIEW
HELP12
HELP14
HELP11
HELP11
HELP16
HELP15
HELP13
HELP17
HELP18
HELP18
HELP13
HELP10
PRESET LEVER
ADJUSTMENT
8
Preset Ring Retainer
4
Fixed Barrel
5
BL Contact
Holder Block
2
Screw
1
Ground Spring A
!=
Preset Ring
7
Main
Spring
9
Steel Ball
!-
Preset
Lever
3
Protector Rubber
6
Lock
Spring
!/
Preset
Lever B
Connect
Barrel
Barrel
HELP
SAL14TC (1.4x TELE CONVERTER) (1.4 X Teleconverter)
Apply the anti-diffusion agent(A-20)
(All circumference of threaded portion)
(All circumference of threaded portion)
Lens Mount Block
Stopper Screw
Apply the adhesive bond
(LOCTITE 460)
(LOCTITE 460)
1
2
4
3
Coupler Hole
HELP
Note for assembling and grease applying positions are shown.
HELP01
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the three screws and the rear light shield barrel is installed.
HELP02
Adhesive bond (LOCTITE 460)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the adhesive bond (LOCTITE 460) to the stopper screw and tighten it.
2.
Apply the grease (G-85) to the instruction (coupler shaft hole) part of the lens mount block.
3.
Apply the anti-diffusion (A-20) to the instruction part of the lens mount block.
4.
Four screws that installs lens mount block tighten in numerical order shown in the figure.
Apply the adhesive bond(B-40)
Rear Light Shield Barrel
HELP
SAL14TC (1.4x TELE CONVERTER) (1.4 X Teleconverter)
HELP03
Grease (G-85): J-6082-626-A
Apply the grease (G-85) to the instrucion part of the coupler.
HELP04
Grease (G-35):
J-6082-621-A
Grease (G-85):
J-6082-626-A
Adhesive bond (B-40): J-6082-614-A
1.
Apply the grease (G-35), (G-85) to the instruction part of gear base plate block.
2.
Apply the bond (B-40) to the two screws that unites gear base plate block with this unit.
HELP05
Grease (G-85):
J-6082-626-A
Adhesive bond (B-40): J6082-614-A
1.
Apply the grease (G-85) to the instruction part of the lock pin.
2.
Apply the bond (B-40) to the screw that unites lock pin with lock release lever.
Apply the grease(G-85)
Apply the grease(G-35)
Gear Base Plate Block
Apply the adhesive bond(B-40)
Apply the grease(G-85)
(All circumference of threaded portion)
(All circumference of threaded portion)
Apply the adhesive bond(B-40)
Lock Release Lever
Lock Pin
Apply the grease(G-85)
Coupler
Connect Barrel
Click on the first or last page to see other SAL14TC service manuals if exist.