DOWNLOAD Sony SAL135F28 Service Manual ↓ Size: 2.2 MB | Pages: 80 in PDF or view online for FREE

4-34

SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)

• Personal Computer

• Finished Inspection JIG (AC 100 V only)

• Lens Adjustment Program (ActuatorChecker)

1)

Connected to equipment with checking lens. (Refer to Section 4-1-3.)

2)

Start up of “ActuatorChecker.exe”.

3)

Click 

[Set up]

, and perform the initial setting. (Refer to Section 4-1-4.)

1)

Click the 

[Focus Pattern]

.

2)

The Serial window appears. Input the lens serial number.

When 

[OK]

 is clicked without inputting the serial number, the date executed is displayed on the completion window of each

item.

3)

The message “Move FOCUS to Infinity position. Then push [ENTER].” is displayed on the pop-up window.

Set the focus to the Infinity position and press down the ENTER key.

4-35

SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)

4)

When the Infinity position check finishes normally, the message “Move FOCUS to Near position at about 5sec.” is displayed on the

pop-up window.

Set the focus to the near position and press down the ENTER key.

5)

When the near position check finishes normally, the message “Reverse FOCUS to infinity position at about 5sec.” is displayed on the

pop-up window.

Set the focus to the infinitly position and press down the ENTER key.

6)

When the infinity position check finishes normally, “OK” is displayed on the pop-up window, and press the ENTER key to return to

the initial window.

1)

When the error display and the NG display appear to the pop-up window, press the ENTER key to return to the initial window, and

perform “2. Checking Method”again.

2)

 Although the focus is positioned at the infinity position, if “NG” appears, confirm or perform the following.

• Cleaning of flexible pattern or the brush.

• Replacing the brush.

• Replacing the main flexible unit.

3)

Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.

4-36

SAL135F28 (STF 2.8(T4.5)/135) (135mm F2.8 [T4.5] STF)

1)

When the error display and the NG display appear to the pop-up window, perform the work with caution so that setting the focus to

the near position or infinity position can be done in more than 5 seconds and no more than 20 seconds.

• When the focus pattern error

• When the focus does not reach the near position or infinity position seconds.

2)

 Although the focus is positioned at the infinity position or near position, if “NG” appears, confirm or perform the following.

• Cleaning of flexible pattern or the brush.

• Replacing the brush.

• Rotating operation error of the focus ring (rotation speed is not suitable at a regulated speed.).

3)

Perform “2. Checking Method”again, repeat the inspection until “OK” appears on the pop-up window.

1. Click the Print button 

.

2. Specify a printer, print range, number of copies, and other op-

tions, and then click [OK].

To set a range to be printed within a page, select the graphic

selection tool 

 and drag on the page to enclose a range to

be printed, and then click the Print button.

1. Click the Find button 

.

2. Enter a character string to be found into a text box, and click

the [Find]. (Specify the find options as necessary)

To execute “find” from current page toward the previous pages,
select the check box “Find Backward” and then click the
“Find”.

3. Open the find dialog box again, and click the [Find Again] and

you can find the matched character strings displayed next.
(Character strings entered previously are displayed as they are
in the text box.)

The parts on the drawing pages (block diagrams, circuit dia-
grams, printed circuit boards) and parts list pages in a text
can be found using this find function. For example, find a
Ref. No. of IC on the block diagram, and click the [Find Again]
continuously, so that you can move to the Ref. No. of IC on
the circuit diagram or printed circuit board diagram succes-
sively.

The find function may not be applied to the Service

Manual depending on the date of issue.

• To move to the first page, click the 

.

• To move to the last page, click the 

.

• To move to the previous page, click the 

.

• To move to the next page, click the 

.

• To reverse the previous screens (operation) one by one, click

the 

.

• To advance the reversed screens (operation) one by one, click

the 

.

This function allows you to go and back between circuit dia-
gram and printed circuit board diagram, and accordingly it
will be convenient for the voltage check.

1. Select either palm tool 

, zoom tool 

, text selection tool

, or graphic selection tool 

.

2. Place the pointer in the position in a text where the link exists

(such as a button on cover and the table of contents page, or
blue characters on the removal flowchart page or drawing page),

and the pointer will change to the forefinger form 

.

3. Then, click the link. (You will go to the link destination.)

Click an item (text) on the bookmark pallet, and you can move

to the link destination. Also, clicking 

 can display the

hidden items.

(To go back to original state, click 

)

• Click the triangle button in the zoom control box to select the

display magnification. Or, you may click 

 or 

 for zoom-

ing in or out.

• Click rotate tool 

, and the page then rotates 90 degrees each.

The printed circuit board diagram you see now can be changed
to the same direction as the set.